Xiaomi’s electric vehicle has gained popularity due to its reliability and thoughtful interface, but sometimes users need to force the device to turn off. The standard shutdown procedure is known to most owners, but specific actions are required in situations with software failure or prolonged storage. Understanding the differences between sleep, full shutdown and reset modes will help to extend the battery life.
In this guide, we will discuss in detail how to correctly complete the operation of the electric scooter in normal mode, and also consider methods of resuscitation of the device when the system freezes. You will learn about the nuances of the power controller and how to properly prepare vehicles for the winter season, avoiding deep battery discharge.
Many beginners confuse short-term pressing with long, which leads to unpredictable results. We explain the logic of the BMS (battery management system) and explain how to safely interact with electronics so as not to damage expensive components in an emergency shutdown.
The regular scooter shutdown
For daily use, the manufacturer provides a simple and fast completion algorithm. To turn off the Xiaomi Mi Electric Scooter scooter, you need to perform a single short press on the power button located under the deck or on the steering rack. The device will sound, and the indicators on the display will go out in a few seconds, going to sleep mode.
It is important to distinguish between sleep and shutdown. In the sleep state, the controller continues to consume minimal energy to track Bluetooth signals or the power button, which allows the device to start quickly, but if it is down for a long time, it can cause a discharge.
If you plan to stay off the vehicle for a few days, it is best to complete a complete shutdown, and after a short press and go to sleep, hold the power button for 3-5 seconds until a characteristic click or change in indication, which signals a break in the power chain by the main controller.
There is a common misconception that the scooter turns off itself after a certain downtime. In fact, the auto-off timer does not work on all models and often requires activation in the application.
Forced reset and system reboot
Sometimes Xiaomi's electronics can freeze: the display is on, but the device does not respond to the buttons, or the scooter does not turn on at all. In such cases, you need a hard restart, similar to the extraction of the battery in smartphones, this is a safe procedure that does not reset the settings, but only reboots the microcontroller.
To do the reset, find a small hole next to the charging port or under a decorative plug on the deck. This is a service port for the reset. You'll need a thin object, such as an unbended clip or needle. Carefully press inside the hole and hold it for 5-10 seconds.
⚠️ Warning: Do not use metal objects too aggressively so as not to damage the internal contacts.The pressure should be clear but without excessive effort, which can break the plastic mechanism of the button inside the case.
If the physical reset button is unavailable or not working, you can use the capacitor discharge method. Turn off the charger if it is connected, and leave the scooter alone for 15 to 20 minutes. In some cases, the system itself goes into deep sleep, after which the repeated pressing of the power button restores performance.
☑️ Actions when getting stuck
After a successful reset, it is recommended to check the firmware version through the Mi Home app. Often freezes are associated with software errors that are fixed by developers in firmware updates.
Storage and conservation of the battery
If you're putting away a scooter for the winter or on a long trip, it's not enough to turn off the scooter, the lithium-ion batteries used in the M365 and Pro have the ability to self-discharge, and if you leave the device simply off, after a month or two, the battery can go into a deep discharge, after which the BMS will block charging for safety reasons.
For proper storage, you need to charge the battery to 60-80% and completely turn off the device with a button (hold). However, even when the leak currents are off, the ideal option is to turn off the balancing connector inside the deck, but this requires disassembly and loss of warranty.
An alternative and safer method is to recharge the scooter every 2-3 weeks, check the charge level and recharge it if necessary, which activates the cells and prevents the voltage from falling below the critical threshold.
| Status. | Action. | Frequency | Risk to the battery | ||||
|---|---|---|---|---|---|---|---|
| Daily use | Sleeping mode (short press) | Constantly. | Minimum | ||||
| Simple 1-3 days | Complete shutdown (holding) | If necessary, | Low. | Storage (month+) | Off + charge control | Every 2-3 weeks | Medium (uncontrolled) |
| Long-term conservation | Charge 60% + cool seat | Quarterly | Minimum |
💡
Store the scooter at a temperature of +5 to +20 degrees Celsius. Frost below -10 ° C can irreversibly damage the chemical composition of the battery even when turned off.
Diagnostics through the Mi Home app
Modern Xiaomi models are closely integrated with the smartphone, which allows you to control power remotely. In the Mi Home or Xiaomi Home app, you can not only track the charge, but also perform a software shutdown of certain modules. Go to the device settings and find the section "General settings" or "Security settings".
This is often a feature that automatically shuts down at a given time interval, and you can set up a scenario where the scooter will go into energy saving mode, if not movement, for 5 or 10 minutes, which is a useful feature for forgetful users.
And you can also see the error history through the app, and if the scooter doesn't turn off or behaves strangely, the logs can record the controller overheating or the Hall sensor malfunction, and this data can help you understand whether hardware repair is needed or if a software reset is sufficient.
Remember to update the application and firmware of the scooter. Developers regularly release patches that improve energy saving algorithms. An outdated version of the software may contain bugs that prevent the system from completing correctly.
Typical problems when switching off
One of the common problems is when the scooter does not respond to (long press) to turn off, usually due to a locking of the interface due to a speed sensor error or a button sticking, in the first case, cleaning the area around the wheel from dirt, in the second - careful design of the button.
Sometimes the lights flash red when you try to turn off, and it's a signal that you have a critical BMS error, like overheating cells or short circuits, so you don't have to force the device off, it's trying to protect itself, let it cool down or disconnect the battery connector if you have the right skills.
⚠️ Warning: If you smell burning or see smoke, move away immediately.In rare cases, a battery failure may cause a fire.Use only original or certified chargers.
Another problem is spontaneous activation in the bag or trunk, which occurs when the power button has no protective casing and is subjected to mechanical pressure, and to avoid this, some users install additional plugs or programmatically turn off the Bluetooth search, which often wakes the device.
Hidden double-press function
Effects of ambient temperature
Temperature plays a key role in Xiaomi's electronics. Lithium-ion batteries lose capacity dramatically in negative temperatures and the controller may not behave properly. Shutdown in the cold can be successful, but turning on after a few hours will be difficult due to the voltage drop under load.
If you've been riding in the winter, don't leave the scooter in a warm room. A sudden temperature drop will cause condensation inside the body, which can short-circuit the control board, and let the device stand in the hallway or on the balcony for 30 to 40 minutes to level the temperature.
In summer heat, on the contrary, overheating is possible. If the scooter warms up after a long trip, the protection system can block the shutdown until the components cool down. In this case, just leave it in the shade for 10-15 minutes, after which the regular shutdown procedure will work normally.
💡
The operating temperature range from -10°C to +40°C is optimal, and going beyond these limits requires special care when manipulating power.