How to turn on Xiaomi Mi TV: 5 working ways (including emergency)

Is it a problem to turn on?

Xiaomi Mi TVs TV (Mi TV 4/4A/4S/5/5X/Q1/Q2/P1) They usually turn on instantly -- but what if the screen stays black, the indicator doesn't burn, or the remote doesn't respond? This article covers all possible scenarios, from baseline start-up to firmware failure recovery.

Instead, we’ll learn how to turn on the TV without the remote, what to do when you’re stuck on the logo, how to take the TV out of sleep if it’s not responding to signals, and even how to force the device to restart via a service menu (spoiler: this works even on locked models).

Important: If your Mi TV was working normally before, but suddenly it stopped turning on, check the power and cables first. 60 percent of the time, the problem is a power outlet, a network filter, or a damaged cord. The other 40 percent are software failures, and we'll teach you how to fix them.

Method 1: Standard button activation on the remote

The most obvious method is to use the original Xiaomi Mi Remote, but even here there are nuances that are not mentioned in the official manual.

What to do in steps:

1. Make sure that the remote has working batteries (even if the indicator does not blink – check them with a tester or replace them).
2. Point the remote directly to the IR receiver of the TV (usually located at the bottom right under the screen frame).
3. Press and hold the power button (⊙) within 3-5 seconds, this will reset the temporary lock if it occurs.

• 🔋 Try to wake up the remote: take out the batteries, press any button 10 times in a row, then insert new elements.
• 📶 Is the remote not synchronized? on some models (Mi) TV Q2 75) Re-binding required: press the Menu + OK 10 seconds.
• 🔄 The TV turns on but immediately turns off? This is a sign of a crash in the Fastboot - read the section on the emergency reboot.

⚠️ If after pressing the power button, the indicator on the TV flashes red 3 times and goes out - this is an error code. E03 (problem with the power supply, in which case repair is required.

Make sure the batteries are not oxidized | Check the IR port on the TV (are there any contaminants) | Direct the remote from a distance of no more than 5 meters | Try an alternative remote (for example, from an air conditioner with universal IR)

-->

Method 2: Enable without remote control (button on the body)

All Xiaomi Mi TVs have a physical power button, but the location and functionality of the TVs are dependent on the model.

If the button does not respond:

1. Turn off the TV from the socket for 1 minute - this will reset the power supply capacitors.
2. Check if the button is stuck (relevant for the Mi TV 4S after wet cleaning).
3. For models with a touch button (Q2/P1), try pressing it with a blunt object (such as a pen cap) – sometimes the sensor does not work on the finger.

Method 3: Enable via the Mi Home mobile app

If the remote is lost and the button on the case is not working, you can turn on the TV via your smartphone, and for this, both devices must be on the same Wi-Fi network.

Instructions:

1. Download the Mi Home app (available for Android and iOS).

• 📱 No smartphone? Use Google Assistant (if the TV is linked to a Google account) or a universal remote from the provider (for example, Rostelecom or Google). A1).

⚠️ Warning: If the TV was reset to factory settings, it will automatically unplug from the Mi Home account. In this case, you will not be able to turn it on through the application - you will need a physical remote control or button on the case.

💡

If you have a Xiaomi Mi AI Speaker, you can turn on the TV with your voice: say, "Hey, Mi! Turn on the TV in the living room." This works even if the remote is dead.

Method 4: Emergency activation after failure (hang on logo, black screen)

If the Xiaomi Mi TV is getting stuck on the MI logo, flashing an indicator or showing a black screen with backlight, it's a sign of a software failure, and 90% of the time, a forced reboot or logging into Recovery Mode helps.

Option 1: Soft reset (soft reset)

1. Turn off the TV from the outlet.
2. Press the power button on the case (or touch zone).
3. Without releasing the button, plug the power cord back in.
4. Hold the button for another 15-20 seconds until the MI logo appears.

Option 2: Hard reset via Recovery

This method will reset all settings, but bring the TV back to life.

1. Turn off the TV (if it is on, hold the power button for 10 seconds).
2. On the remote, press the combination Menu + Back (back).
3. Without releasing the buttons, press the power button on the body.
4. Release all buttons when the Recovery menu appears.
5. Select Wipe Data/Factory Reset (use Volume ± for navigation and OK for confirmation).

💡

If after resetting the TV requires a password from the Mi Account, and you do not remember it, use the official recovery form: account.xiaomi.com. Enter the linked email or phone number.

Method 5: Enable via HDMI-CEC (if the TV does not respond to the remote)

HDMI-CEC technology allows you to control your TV through connected devices (consoles, game consoles, sound panels). If your Mi TV supports this feature (check in the HDMI-CEC settings → On), you can turn it on like this:

Connect to the TV:

• 🔊 Xiaomi or Denon sound panel: press the sound system remote TV Power.

If HDMI-CEC is disabled, activate it in advance.

1. Go to Settings → Devices and accessories → HDMI-CEC.
2. Turn on the TV control option.
3. Save the settings and restart the TV.

⚠️ Note: On some models (Mi) TV P1) post-firmware update HDMI-CEC If the function stops working, upgrade the TV to the latest version of the software.

Frequent mistakes and their solutions

Let’s discuss the typical problems that make Xiaomi Mi TV not turn on, and how to fix them:

If none of these methods worked, maybe the TV needs to flash it over USB.

FAQ: Answers to popular questions