The first launch of the Xiaomi Mi TV TV A2: step-by-step instructions with photos and tips

You just unpacked the new Xiaomi Mi TV A2 And you're standing in front of a black screen with a remote, not knowing where to start? The first launch of a Xiaomi smart TV can seem daunting, especially if you've used other brands' devices before. In this article, we will discuss all the stages of turning on – from connecting to the outlet to completing the initial setup – and also tell you how to avoid typical errors and what to do if the TV does not respond to the remote control.

Model Mi TV A2 (including modifications A2 32", A2 43", A2 50" and A2 55′′ runs on Android. TV branded MIUI for TV. This means that the setup process is not much different from other smart TVs, but there are nuances associated with PatchWall firmware and integration with the Xiaomi ecosystem. If you miss a step (for example, do not connect to Wi-Fi during the setup stage), you will have to do it manually through the menu later – and this takes longer.

We've developed a step-by-step guide with visual cues that will suit even those who have never set up a smart TV, and if something goes wrong, you'll find a section at the end of this article that addresses some of the most common problems.

1.Preparation for the first turn on: what to do before pressing the power button

Before turning on Xiaomi Mi TV A2 If you go to the socket, check out a few key points, it will save you from unpleasant surprises like no image or remote control problems.

• 🔌 Power: Use only the native power cable from the kit. Connect it to the TV and then to the socket. Don't use extension cords or network filters with a switch - they can block current in standby mode.
• 📺 Location: Place the TV on a flat surface (unless it is a wall mount). Make sure the vents on the back are not covered - overheating can cause automatic shutdown.
• 🎮 Remote: insert batteries (usually included) and make sure there are no obstacles between the remote and the TV. TV A2 infrared (IR) sensor, so the angle of direction is important.
• 🌐 Internet: Prepare the data to connect to Wi-Fi (network name and password). If you plan to use an Ethernet cable, connect it to the port in advance. LAN back-bar.

Note that in some regions (e.g. the EU), Xiaomi TVs come with a factory film on the screen, which must be removed before it turns on, otherwise it can stick to the matrix from heating. The film usually has a small tongue at one of the corners.

⚠️ Note: If you connect the TV through HDMI-ARC To the sound bar or receiver, first turn on the external device. TV A2 You may not automatically detect it, and you will have to adjust the sound manually.

2. Turning on the TV: where is the power button and what to do if the remote is not working

In the Xiaomi Mi model TV A2 The physical power button is located on the bottom of the screen (usually under the Mi logo), and it's made in the form of a small touch switch — press and hold it for 2-3 seconds to turn on the TV:

• 🔋 Check if the power cable is connected to the socket and TV.
• ⚡ Try another outlet - perhaps the protection machine worked.
• 🔄 Turn off the power cable for 10 seconds, then plug it back in.

If the remote is not working, try the following:

1. Make sure the batteries are inserted correctly (polarity is observed).
2. Point the remote directly to the infrared receiver (usually located at the bottom right or left of the screen).
3. Hold the remote to a distance of 1-2 meters and press any button, looking into the lens of the camera of the smartphone – if the batteries are working, you will see an infrared glow.
4. If the remote still doesn’t work, try resetting it by holding down the Menu buttons. + OK 5 seconds.

In extreme cases, you can control the TV through the Mi Remote app (available for Android and iOS).

1. Download the application from the official store.
2. Connect your phone and TV to the same Wi-Fi network.
3. In the app, select Add Device → Television → Xiaomi.
4. Follow the instructions on the screen for pairing.

💡

If the TV is turned on, but the screen remains black, check the source of the signal: press the Source (or Input) button on the remote and select HDMI, TV or AV depending on the connected device.

3. Step-by-step settings when first turned on: from language selection to Wi-Fi connection

After successful activation, the Mi logo will appear on the screen, and then the initial setup wizard will be introduced, the entire process will take 5-10 minutes and consists of the following steps:

Select the interface language|Connect to Wi-Fi or Ethernet|Acceptance of a license agreement|Set up a Xiaomi account (optional)|Select the source of the signal (antenna, HDMI etc.)|Complete the setting and go to the main screen-->

Let’s analyze each stage in detail:

Step 1: Choosing a language and region

Immediately after booting, the system will prompt you to select the interface language. Scroll the list down or up using the buttons. ↑/↓ on the remote control and select Russian (or other language you want), then confirm the choice with a button. OK.

Next, choose a country. For Russia, for Kazakhstan, for Ukraine, etc. This depends on the availability of certain services (for example, Google Play or Netflix).

Step 2: Connecting to the Internet

The system will suggest connecting to the network. Select your Wi-Fi from the list, enter your password using the on-screen keyboard (control - buttons) ↑/↓/←/→ on the remote control and confirm the connection.

If you use an Ethernet cable, the system will automatically determine the connection, in which case skip the Wi-Fi setup step.

⚠️ Warning: If the TV doesn't find your Wi-Fi network, check if it supports 5GHz.Some budget Mi models TV A2 Only work at 2.4GHz. Switch the router to 2.4GHz mode or change the network name for compatibility.

Step 3: License Agreement and Privacy Policy

Read the terms of use (you can skip by clicking Accept). Here the system can suggest to enable the collection of anonymous statistics - this item can be turned off without consequences for the TV.

Step 4: Set up a Xiaomi account (optional)

The system will offer to log into your Xiaomi or Google account, but it does not have to be, but it has several advantages:

• 📱 Sync with other Xiaomi devices (such as a smartphone or smart lamps).
• 🎬 Access to cloud services and personalized recommendations.
• 🔄 Automatic backup of settings.

If you don’t have an account, choose Skip or Create later.

Step 5: Configure the signal sources

The TV will select the main source of the signal:

• 📡 antenna (DVB-T2) — television-watching.
• 📶 Satellite (DVB-S2) — If you have a satellite dish.
• 🖥️ HDMI — for connecting consoles, game consoles or PC.

You can choose multiple sources or skip this step by configuring them later in the Settings menu. → Channels.

Step 6: Completion of the setup

The last screen will congratulate you on the successful setup. Click Ready and you will be taken to the main screen PatchWall, Xiaomi’s proprietary launcher, which collects recommendations for content, applications and settings.

💡

If you missed a step (for example, you didn’t connect to Wi-Fi), don’t worry: you can change all settings later in the Settings menu. → System system → Initial setup.

4. Set up air and satellite TV on Xiaomi Mi TV A2

If you're planning to watch on-air or satellite TV, you'll need to set up the channels after you first turn on.

1. Go to Settings → Channels → Autosetting.
2. Select the signal type: DVB-T2 — for digital terrestrial TV (antenna). DVB-S2 — satellite-TV. DVB-C — Cable TV (if your provider supports it).

channel

5-15 minutes

After completion, save the channels found and sort them as you see fit.

If the channels are not located or the image is "crumbled", check:

• 📶 Signal quality (the channel settings menu has a signal level scale).
• 🔌 Correct connection of the antenna (connector) RF IN back-bar).
• 📡 The direction of the antenna (for terrestrial TV it should be focused on the nearest tower).

5. Connection of external devices: consoles, sound panel, flash drives

Xiaomi Mi TV A2 It supports connecting different devices through ports on the back. Here's what you can connect and how to do it:

🎮 Game consoles (PlayStation, Xbox) or TV consoles (Android) TV Box)

Use the port. HDMI (It is recommended to connect the console to the port with a mark. HDMI ARC, If you're using a sound bar, after you've connected:

1. Turn on the console.
2. On the TV remote, press Source (or Input).
3. Select the appropriate HDMI-port.

🔊 Sound panel or receiver

There are two options for connecting:

• Through HDMI ARC: connect the port HDMI ARC port-on HDMI ARC on the soundbar. Turn on the function. ARC sound-tuning.
• Through Optical (TOSLINK): Use an optical cable to transmit sound. In the settings of the TV, select Digital Audio Output. → Optical.

💾 Flash drive or external hard drive

Connect the device to the port USB (The TV automatically detects it and prompts you to open files through the built-in media player:

• Video: MP4, MKV, AVI, MOV.
• Audio: MP3, FLAC, WAV.
• Photo Photo: JPEG, PNG, BMP.

⚠️ Warning: If the TV can't see the flash drive, check its file system. TV A2 supportive FAT32 and NTFS, may not recognize exFAT or ext4. Format the drive in FAT32 computer.

6.Firmware Update: Why It Matters and How to Do It Right

After the first turn on, it is recommended to update the TV firmware. This will fix possible errors, add new features and improve compatibility with external devices. TV A2 There are two ways to update:

🌐 Automatic update via the Internet

The simplest method is:

1. Go to Settings → About TV → System Update.
2. Click Check for updates.
3. If the update is available, confirm its installation.
4. Wait until the TV is finished (the TV will restart automatically).

💾 Update through USB (If there is no internet or automatic update does not work)

If the TV is not connected to the network or the update “hangs”, download the firmware manually:

1. Go to the official Xiaomi website and find firmware for your model (e.g. Mi). TV A2 43").
2. Download the file (usually a.zip archive).
3. Unpack it and copy it to a flash drive (formatted into a FAT32).
4. Insert the flash drive into the TV and go to Settings → About TV → Update via USB.
5. Select the firmware file and confirm the installation.

Important: Do not turn off the TV during the update USB. If the process is interrupted, the TV may stop turning on, and you will need to flash through the service mode.

7. factory reset: when it needs to be done and how to do it

If the TV is unstable (e.g., brakes, fails to turn on or finds channels), a factory reset can help.This will delete all your data, including:

• 📺 Save channels.
• 🔑 Connected accounts (Xiaomi, Google, Netflix, etc.).
• ⚙️ Personal settings (language, sound, image).

There are two ways to discharge:

⚙️ Reset via the settings menu

If the TV is turned on and reacts to the remote:

1. Go to Settings → About TV → Reset settings.
2. Choose Reset all settings.
3. Enter. PIN-code (default 0000 or 1234).
4. Confirm the action.

🔧 Hard reset (if the TV is not turned on)

If the TV does not respond to the remote or "hangs" on the logo:

1. Turn off the TV from the outlet.
2. Press and hold the physical power button on the TV.
3. Without releasing the button, connect the power cable back.
4. Hold the button for another 10-15 seconds until the Mi logo appears.
5. Release the button and the TV will reset and restart.

⚠️ Warning: After a hard reset, the TV will return to the box-like state, and you will have to repeat the initial setting (language selection, Wi-Fi connection, etc.).

8. Frequent problems and their solutions: TV does not turn on, no sound, remote does not work

Even after setting up correctly with Xiaomi Mi TV A2 We've collected the most common ones and ways to fix them.

If none of the solutions worked, try:

1. Update the firmware (section 6).
2. Reset the settings (Section 7).
3. Contact the Xiaomi service center (if the TV is guaranteed).

You can also use a service menu to get into the diagnostics.

1. Turn off the TV.
2. On the remote, press sequentially: Menu → 1 → 3 → 9 → Menu.
3. The TV will turn on in service mode (do not change the settings if you are not sure of their value!).

FAQ: Answers to Frequent Questions