How to turn on Xiaomi Redmi 9A phone: the full guide

Modern smartphones such as Xiaomi Redmi 9A are complex computing devices that can require understanding the basic principles of the Android operating system and the MIUI shell. In most cases, the process of launching the device is a trivial action that does not require any special knowledge or technical skills from the user. However, situations are different, and sometimes the standard algorithm of actions does not lead to the desired result, causing confusion among the owner of the gadget.

If you find that your smartphone has stopped responding to the usual touches of the screen or does not want to light up after a long downtime, this is not a cause for panic. There are a number of software failures or battery discharging features that can simulate a device failure. In this article, we will discuss in detail all possible scenarios for the launch of the Redmi 9A, from regular on and ending with a forced restart of the system.

Understanding the mechanics of buttons and indicators will allow you to quickly diagnose the condition of the gadget. We will consider not only standard procedures, but also methods of resuscitation of the device in critical situations when the software stops responding to user commands.

Standard device start-up procedure

To initially turn on a smartphone that has been completely turned off or just removed from the box, you need to find a physical power control button. On the Redmi 9A model, this control is located on the right side of the body, which is standard for most modern Xiaomi.The button is usually elongated and can be separated from the volume control keys by a small gap or embossed ledge for ease of tactile search.

The activation process requires a confident, but not overly strong press. You need to press the power button and hold it for a few seconds, usually from 3 to 5, until the Mi or Redmi logo appears on the display. Once the graphic (logo) button can be released, since the further process of loading the Android operating system occurs automatically without user intervention.

⚠️ Note: If the screen remains black after the logo appears, it is possible that the device is in deep discharge mode and requires a connection to the power supply for initial activation.

It is important to note that the response rate may depend on the state of the software. If a device has multiple updates or background processes installed, the logo appearance phase may be delayed. In normal operation, the Redmi 9A must fully boot and go to the lock screen within one minute after releasing the power button.

Actions in deep battery discharge

One of the most common reasons why the Xiaomi Redmi 9A doesn't respond to the power button is the deep battery drain.The lithium polymer batteries used in modern smartphones have protective mechanisms that block the attempt to turn on at a critically low charge level to prevent cell damage.In this case, the phone may not give any external signs of life immediately after the charger is connected.

If you suspect that the battery is completely dead, you need to connect the smartphone to the original charger and a serviceable cable. It is recommended to use a power supply with a current of at least 2 Amps to speed up the process. Once connected, the charging indicator (LED) may not light up immediately, and only an empty battery or lightning image can be displayed on the screen for 5-10 minutes, while the device will remain off.

• 🔋 Leave your phone on charge at least for 30-40 minutes, even if the screen goes out and does not respond to touch.
• 🔌 Use only the original Micro-USB cable or quality analogue, as cheap cables may not allow enough current to pass through.
• 🌡️ Make sure the ambient temperature is not too low, as the cold battery charges extremely slowly or does not charge at all.

Only after the charge level reaches the minimum threshold (usually about 3-5%), the smartphone will either turn on automatically or allow you to do it manually through the power button. Attempts to turn on the device before this point may be unsuccessful, since the voltage is not enough to start the processor and illuminate the screen.

Forced reset (Hard Reset buttons)

In situations where MIUI software freezes, the operating system stops responding to commands, and the screen goes out, but the phone doesn't turn off completely, a forced reboot method is required. This method is also known as Hard Reset buttons, and it has nothing to do with completely resetting data to factory settings, so your files and contacts will stay safe.

To perform this procedure on the Redmi 9A, you need to press the on button and hold it for a long time - from 10 to 20 seconds. In some cases, if standard retention does not help, you may need to simultaneously clamping the on button and the volume button.

This method breaks the power circuit at the software level, causing the power controller to restart all processes. If after the vibration the phone started to boot, then the problem was temporary software in nature. If the device vibrates, but the screen remains black, perhaps the display or the plume connecting it to the motherboard is defective.

💡

If the phone vibrates but the screen is black, try flashing a flashlight on the display: if you see a barely noticeable image of the interface, then the screen backlight has burned.

Use of the Engineering Menu and Recovery Mode

If standard methods don't work, you can try to enter Recovery Recovery mode, a special diagnostic mode built into the firmware that allows you to control the device at a low level, which is entered into this mode on Xiaomi by a keyboard combination when the phone is off.

To enter Recovery Mode on Redmi 9A, you need to press both the power button and the Volume Up button at the same time. Hold them until the Mi logo appears, then release the power button, but continue to hold the volume button until a menu with multiple items appears in English or Chinese appears. Navigation in this menu is done by volume buttons, and selection is made by the power button.

⚠️ Note: Selecting Wipe Data will result in the complete removal of all photos, contacts and applications. Use this option only if you are ready to lose data or if your phone is blocked.

If you managed to log in to the Recovery menu, select Reboot, then Reboot to System, which will start the operating system to boot normally. If the phone cycles to restart or freezes on the logo even after logging in to Recovery, the problem may lie in the damage to the system files of the firmware.

Problems with the on button and hardware malfunctions

Sometimes the Redmi 9A is not enabled by a physical breakdown of the power button, the mechanism of the button can wear, oxidize, or move the plume from the motherboard, in which case the press does not cause a tactile click or characteristic sound, and the device remains in sleep mode.

To check the functionality of the button, connect the phone to the computer through USB-If the computer makes a new device detection sound when connected, but the phone screen is silent, this may indicate that the power controller is working, but the command to turn on the screen or system does not pass due to a faulty button. Also a sign of the problem may be sticking a button or its sliding inside the case.

• 🔍 Carefully examine the button for dirt, sand or sticky traces that may have got inside the mechanism.
• 🖱️ Try to gently (without fanaticism) press the button from different sides to see if the mechanism has a move.
• 🔌 Connecting to a PC will help you know if the phone is alive, even if the screen isn’t lighting up (the computer can determine the device as if it were a phone"QHSUSB_BULK" or "Android").

In case of hardware failure of the power button, you can turn on the phone by closing certain contacts on the motherboard (disassembly and soldering skills are required) or through the Auto Power On mode (if such an option was activated in advance and the phone is able to respond to power supply when charging, although this does not always work stably on the Redmi 9A without modified software).

Set up automatic switching on schedule

The MIUI-based Android operating system provides a useful automatic on and off feature on a schedule, which can be extremely useful if the power button is unstable, or simply for the convenience of using the smartphone as an alarm without having to keep it on all night.

To activate this feature, you need to go to the system settings. The path usually looks like: Settings → Battery and Performance → Battery → On/off schedule. In some versions of the firmware, this item may be in the Advanced Settings section. Here you can set the on and off times, and also select the days of the week.

It is important to note that for this function to work, the phone must have sufficient battery power. If the battery runs out completely when it is turned off, automatic switching on will not happen until you reconnect the charger. Also, when turned on on on schedule, the phone may request input PIN-the unlock code or pattern lock if this security feature is activated.

💡

Automatically switching on on on a schedule is a great way to extend the battery life and power buttons if you don't need a phone at night.

Using this feature not only saves the life of the button, but also disciplines the use of the gadget, providing a digital detox at certain hours. However, it is worth remembering that when you are off, you will not be able to receive calls and messages, so set your schedule wisely.

Frequently Asked Questions (FAQ)