Modern smartphones like the Xiaomi Redmi Note 10 Pro have become indispensable life companions, storing vast amounts of personal information and performing the functions of navigators. However, it often happens that after buying or updating a firmware, users are faced with the inability to run maps, order a taxi or simply share their point on the ground, this is because basic geolocation services can be turned off by default in order to save energy or privacy.
Turning on the device search is not just a single button activation, but a comprehensive setup of the MIUI system, which affects the operation of GPS, GLONASS and network services. Without these components working properly, the device becomes a regular “ringer”, losing its main advantage – communication with the digital world. In this article, we will discuss in detail all the stages of activation, from simple switches to hidden developer settings.
To start with, geolocation is a service that collects your gadget’s location data using satellites and cell towers. On the Redmi Note 10 Pro, this process is optimized, but requires manual user intervention for full functionality, and we’ll go from basic settings to solving complex software conflicts.
Basic activation of geolocation services through the curtain
The fastest way to start navigation services is to use a quick access panel, which is ideal for situations where you urgently need to determine the location or turn on the navigator in the car, but it is worth remembering that this method only activates the general mode, not always allowing you to fine-tune the signal sources.
To start, unlock your Redmi Note 10 Pro screen and swipe from top to bottom to open the control center. In the icon grid, find an icon that may be called Location, Geodata, or have a pin image. Press it to illuminate in blue, which signals the module activation.
If you don’t see the icon in the front row, swipe right or click on the edit button (usually three dots or a pencil) to add a shortcut to a prominent place. Once turned on, the system will start scanning the surrounding space to triangulate your position.
⚠️ Attention: Activation through the curtain does not guarantee accurate navigation in buildings, as it may not turn on the scan of Wi-Fi networks to clarify the coordinates.
Once turned on, it is recommended to immediately check the work by running any mapping application. If the cursor does not appear within 10-15 seconds, proceed to a deeper setting through the parameters menu.
Configure the accuracy of the definition in the system menu
To work fully, all functions, including automatic sending of coordinates in emergency services, you need to go to a deep settings menu, where the user gets full control over what technologies will be used for search. The standard mode “Saving Charge” often limits the functionality, so it should be revised.
Go to Settings, then select Additional (or Location depending on the version of MIUI) and you will see a menu where you want to select mode of operation. For maximum accuracy, especially in urban environments, select High Accuracy.
This mode forces the Redmi Note 10 Pro to use a combination of GPS satellites, cell tower data, and scanning nearby Wi-Fi networks, an approach that allows you to determine the location even inside shopping centers or in underground parking lots where there is no direct signal from the satellite.
💡
For maximum satellite search speed ("cold start"), go out into an open space where the sky is clearly visible, with no tall buildings or trees overhead.
Also available on this menu is the option "Wi-Fi and Bluetooth Refinement," which means that the slider opposite this item is activated, allowing the device to use wireless network databases to position instantly without waiting for a response from satellites.
Managing permissions for specific applications
The Android security system installed on Xiaomi requires explicit permission for every application that wants to access your coordinates. Even if global GPS is enabled, a specific program (such as Yandex.Maps or Uber) can be blocked.
Go to Settings → Privacy Protection → Permissions Manager → Location. Here you will see the full list of all installed programs. Find the application you need and make sure that the resolution is “Always” or “Only when used”.
It is important to distinguish between the two modes: Always mode is required for activity trackers, anti-theft services or friend-finding apps.Only when used is more secure for privacy and saves battery, but will keep the app from running in the background.
- 📍 Always: The app has access to geodata even when the screen is off.
- 📍 Only when used: Access is only available as long as the app is open on the screen.
- 📍 Ask: The system will ask for permission each time.
- 📍 Prohibit: Complete access blocker for selected program.
If you use a navigator for trips, make sure it is allowed to display notifications on top of other windows, otherwise voice prompts may not play during the call.
Calibration of sensors and the developer mode
Sometimes it happens that all the settings are correct, but the blue circle on the map wanders or shows the wrong direction. In this case, calibration is required. The Xiaomi Redmi Note 10 Pro has built-in diagnostic tools, but it is also useful to know about hidden features.
To access the advanced settings, activate the developer mode. Go to Settings → About phone and quickly click 7 times on the MIUI version. After the message “You became a developer” appears, go back to the main settings menu.
There will be a new section additionally → For developers, find a location simulation or Bluetooth scanner, and you can reset your network settings here, which often helps with problems with your location. A-GPS.
What is an A-GPS?
Don’t change the values in the developer menu if you’re not sure what they’re going to do. Incorrect location simulation can cause some banking apps or games (like Pokémon GO) to stop working properly.
Comparison of GPS modes
Understanding the differences between modes helps extend the battery life of the Redmi Note 10 Pro without losing functionality. Below is a table showing the impact of different settings on accuracy and power consumption.
| Mode of work | Signal sources | precision | Battery consumption |
|---|---|---|---|
| High precision | GPS, GLONASS, Wi-Fi, LTE | Up to 5 meters. | High-pitched |
| Saving charge | Wi-Fi and towers only. | Up to 100 meters. | Low. |
| Only the device | GPS satellites only. | Tall (outside) | Medium. |
| Off. | No. | Absent. | No. |
As you can see from the table, the first option is optimal for driving or walking, and the charge saving mode is suitable for situations where you just need to approximate the area of the location, for example, with a discharged battery.
💡
The optimal balance between accuracy and autonomy is achieved in High Accuracy mode with Wi-Fi scanning enabled, even if the Wi-Fi module itself is turned off.
Solving Location Problems
If after all the manipulations, the search for the device on the Xiaomi Redmi Note 10 Pro still does not work or does not work correctly, it may be a software failure or cache conflict.
First, try resetting your network settings. This won't delete your personal photos or contacts, but will return to factory settings for Wi-Fi, Bluetooth and mobile networks. Way: Settings → Connection and Sharing → Reset Wi-Fi, mobile networks and Bluetooth.
The second method is to clean up Google Play data. Go to Settings → Apps → All apps, find Google Play Services and click Clear → Clear All Data. This will cause the system to re-query current satellite data.
- 🔄 Reboot the device after resetting the network settings.
- 📡 Make sure you're on SIM-The card activated mobile Internet.
- 🗺️ Check the work in safe mode to exclude the impact of third-party launchers.
In rare cases, the problem can be hardware, such as the departure of the antenna plume after a fall. If the software methods do not help, and in other locations the signal is also absent, you should contact the service center.
⚠️ Note: Resetting your network settings will remove saved passwords from Wi-Fi networks, so remember or write them down in advance so you don’t lose access to your home Internet.
Use of the “Device Search” function of Google
And it's worth mentioning a feature that allows you to find the phone itself if you lose it, which is not just GPS activation, but security activation, which is tightly integrated with your Google account at Xiaomi.
To make sure your Redmi Note 10 Pro can be found, go to Settings → Google → Device Search. Make sure the Allow Remote Search switch is active. It is also recommended to enable the Allow Remote Lock and Reset option.
This feature works even if the phone is in Do Not Disturb mode or the screen is off, provided there is an internet connection, a critical security tool that every smartphone owner needs to configure.
☑️ Checking readiness GPS
Check the status of this feature regularly, especially after major system updates, as some privacy settings may reset to stricter defaults.