Modern wireless headsets have become an integral part of the digital lifestyle, offering freedom of movement and high-quality sound without unnecessary wires. Xiaomi Mi True Wireless Earbuds Basic 2s model has proven to be a reliable budget solution with AAC codec support and low power consumption. However, like any electronics, these headphones can require the correct initial activation or re-pairing after purchase or prolonged downtime.
The process of activating the device often seems trivial, but users often face situations when the gadget does not respond to touch or does not appear in the list of Bluetooth devices of the smartphone. This can be due to a discharged battery, protective film on the contacts or a failure in the software of the case itself. In this material, we will discuss in detail all the stages of activation, from unpacking to forced reboot of the system.
Understanding the logic of the indicators and touch panels will help you avoid unnecessary worries and quickly return the device to working condition. We will look not only at standard scenarios, but also at methods for solving common problems faced by owners of this model.
Initial preparation and verification of the charging case
Before attempting to turn on the headphones themselves, you need to make sure that the charging case has sufficient energy level. It often happens that during long-term storage in the warehouse, the lithium-ion battery of the box discharges to zero, making it impossible to activate the headset. Connect the case to the power source using the Micro-USB cable that comes with the kit.
Note the LED light on the front of the charging case, which should be red during charging, and after full battery life, it should go out or light up white (depending on the specific firmware revision). If the light doesn't light up at all, try replacing the cable or power supply, as the problem may be in them.
It is also important to check the contacts inside the case and on the headphones themselves. New devices often have microscopic protective films or factory lubricant that prevent contact. Gently wipe the golden contacts with dry cloth or cotton swab to ensure reliable current transfer.
⚠️ Note: Do not use powerful chargers from smartphones with support for fast charging (Quick Charge) 3.0/4.0) for the headphone case, unless the instructions say otherwise. 1And can damage the power controller of a compact battery.
After connecting to the network, allow the device to lie down for at least 15-20 minutes, even if the indicator lights up immediately, which is enough time to “wake up” the chemical processes in the battery and provide enough charge for the first turn on.
Activation of headphones and extraction from the case
The main way to turn on Xiaomi headphones is as simple as possible and does not require finding hidden buttons on the case of the plugs themselves. Automatic turn on occurs when you remove the device from the charging case. When you take out the right or left earphone, the built-in circuit break-down sensor captures the action and feeds power to the Bluetooth module.
Visual confirmation of successful activation is the flashing of a white indicator on the end of the earphone. If you pull out the device and the LED is silent, this is a signal that either the case is discharged, or the earpiece itself was not tightly mounted in the socket before and was not charged. Make sure that the magnets reliably attract the headset to the contacts.
☑️ Pre-insertion check
There is also a forced-on mode if the automation fails, which requires touching the sensory area on the headphone body and holding your finger for about 5 seconds, but in the Basic 2s, this method is rarely used and mainly serves to reset or force the switch off.
Once both headphones are removed, they must automatically find each other and create a connection, as evidenced by the flashing of the indicator on only one headphone (usually the right one), while the second stops blinking or blinks less often. TWS-The system (True Wireless Stereo) is ready to search for a smartphone.
The process of pairing with a mobile device
When the headphones are in pairing mode, you need to find them in the Bluetooth menu of your smartphone. Go to your phone's settings, select the Bluetooth section and start searching for new devices. The list of available gadgets should appear as Xiaomi Earbuds Basic 2s or simply Mi True Wireless EBs Basic 2S.
Click on the device name to start. In some cases, the system may request code confirmation or simply notify you of a successful connection. Once synchronized successfully, the voice assistant may say the phrase "Connected" and the headphone indicators will go out or start flashing at a long interval, signaling that they are working in the background.
- 📱 Make sure that Bluetooth on your smartphone is activated and visible to other devices.
- 🔋 Check that the headphones are not automatically connected to another gadget that was nearby before.
- 🔄 If the device is found but not connected, try clicking “Forget the device” in the Bluetooth menu and start the process again.
It's worth noting that when you first connect the right earbud, you're the master of the left, which is why it's important that the first pairing is successful with the right one, and if you desynchronize the channels (sound comes from only one ear), you'll need to reset the reset procedure, which we'll talk about later.
💡
If the smartphone doesn't see the headphones immediately after you remove them, put them back in the case, close the lid for 5 seconds and pull them out again.
Indicator management and its significance
Understanding color is key to diagnosing the state of the headset. The LED lights on Xiaomi Mi True Wireless Earbuds Basic 2s tell the user about the battery status, charging process and Bluetooth mode. White usually indicates active processes associated with the connection.
If the indicator is always red, even when the earphone is not in the case, this may indicate a malfunction of the battery or controller. In normal mode, the red light should disappear immediately after removal from the charging box.
| Color of indicator | Mode of work | User action |
|---|---|---|
| Red (constantly) | Charging's coming. | Leave it in the case until full charge. |
| White (fast blinking) | Interconnection mode | Look for a device in a Bluetooth smartphone |
| White (slow blinking) | Connected to the phone. | You can use it, the battery is normal. |
| Red (blinks once every 5 seconds) | Low charge. | Put it on charge immediately. |
It is important to distinguish between blinking frequency. A quick blink of white means that the earphone is looking for a pair or is in visibility mode. A slow, rhythmic blink (once every few seconds) indicates that the device is successfully connected to the smartphone and ready to play audio.
What to do if the lights are different colors?
Resetting and forced inclusion
In situations where standard methods don't work and the headphones don't turn on or connect, you need to perform Hard Reset, which returns factory settings and clears the memory of previous connections. For the Basic 2s, the reset process looks specific.
Put both earbuds in the charge case. Make sure they charge (red lights are on). Then, without removing them from the case, press and hold the touchpads on both earbuds simultaneously for about 20 seconds. The indicators should flash red and white several times, then go out.
⚠️ Warning: During reset, do not remove the headphones from the case and do not open the lid. Interrupting the process can lead to a software failure, after which the devices will no longer see each other.
After a successful reset, the indicators can briefly light up, signaling a reboot. Now you need to remove the headphones from the case — they must automatically turn on and go into rapid flashing white, waiting for a new pairing. In the Bluetooth list on the phone, you need to delete the old record about the headphones and create a new one.
This same combination of actions (holding the sensor 5-10 seconds) is used to force the headphones to turn off if they are “hanging” and do not respond to commands.
Resolving Common Problems at Startup
Sometimes users are faced with a situation where one earphone is working and the other is silent. This is a classic problem of desynchronizing the stereo pair. In 90% of cases, a full reset described above helps. However, if this does not help, try to discharge both earphones to zero (leave them out of the case for a few days), and then charge them to 100% when turned off.
Another common problem is the quiet sound or lack of it immediately after turning on. Check the balance settings in your smartphone and make sure that the volume is twisted not only in the system, but also in the headphones themselves (some models have independent adjustment).
- 🔊 Check if the Mono mode is activated in special features Android/iOS.
- 📶 Make sure there are no thick walls or working microwave ovens between the phone and headphones.
- 📲 Update the Mi Music app or use third-party players to check work.
If Xiaomi Mi True Wireless Earbuds Basic 2s headphones do not respond to the case at all (the case indicator does not light up), the problem may be oxidation of contacts.
💡
The main reason for the failure is a deep discharge of the battery. Leave the case with headphones on charge for 1-2 hours, even if the indicator does not burn immediately.