How to connect the remote with the TV Xiaomi: all the ways of 2026

Connecting the remote from Rostelecom to the Xiaomi TV often raises questions among users — especially if we are talking about models with interactive TV or consoles from the provider. TV Xiaomi, and the instructions rarely mention brand-specific nuances, and in this article, we will discuss all working methods of synchronization, from standard code programming to manually adjusting through the TV menu.

It is important to understand: remotes Rostelecom are of two types - infrared (IR) for the consoles and Bluetooth/RF remotes for interactive TV. It depends on the method of connection. TV 4S or Mi TV Q2 Android TV Automatic synchronization is suitable, and for older models without HDMI-CEC You'll have to type the codes manually. We've tested all the methods on the actual firmware. 2026 Years - below only proven solutions.

1. We determine the type of remote by Rostelecom

Before you try to link devices, you need to know what remote you're holding, and that's what the connection algorithm and the problems you might have.

Here are the main options:

• 📺 Remote for the console Rostelecom - usually gray or black with a button OK It's in the center and the ISP logo, it's in the infrared, it requires a line of sight.
• 🎮 Interactive TV remotes are often white or silver, with Guide, Archive and Video buttons on request. Can use Bluetooth or radio frequency (RF), so they don't require direction.
• 🔄 Universal remote - issued when you connect some tariffs. TV/STB (side-switch or Mode button).

How to distinguish a Bluetooth remote from an IR remote:

• 🔦 Point the remote to your smartphone camera and press any button. If you see a red light in the lens, it's an IR remote. There's no glow, probably Bluetooth or RF.
• 📱 Check for the Pairing button – it is only available on wireless remotes.

⚠️ Note: If your Xiaomi TV is 2019 or older (e.g. Mi) TV 4A), It may not support the Bluetooth remotes with Rostelecom, which would require an IR remote or an additional adapter.

2. Method 1: Automatic synchronization (for the purpose of Bluetooth/RF-multiple)

This is the simplest method that works for interactive TV by Rostelecom and modern Xiaomi TVs (e.g. Mi). TV Q2 2023, Mi TV A2 43) Suitable only for Bluetooth Low Energy remotes (BLE) radiofrequency.

Instructions:

1. Turn on Xiaomi TV and wait for Android to load TV Google TV.
2. At the Rostelecom remote, press the button. OK (Pairing, if any, for 5-7 seconds until the indicator flashes.
3. On the TV, go to Settings. → Input devices → Add an accessory.
4. In the list, find a device with a name RT-PULT- (where are the numbers and select it.
5. Confirm the pairing on the remote by pressing OK.

If the TV doesn't find the remote:

• 🔋 Check the battery charge (for remotes with a battery).
• 📶 Make sure there are no interference sources nearby (Wi-Fi routers, microwaves).
• 🔄 Reboot the TV: Settings → The device → Reboot.

⚠️ Note: On Xiaomi TVs with firmware MIUI TV older than 3.0 (2021 and earlier) may not have a menu Add Accessory. In this case, use manual code programming (method 3).

3. Method 2: Connecting through HDMI-CEC (Rostelecom)

If you have a Rostelecom prefix (for example, SML-482 or SML-501), TV-connected HDMI, You can control one remote control via technology HDMI-CEC. This will allow you to turn on TV, adjust volume and switch channels from the provider’s remote.

How to turn HDMI-CEC on Xiaomi TV:

1. Go to Settings. → Device and sound → HDMI-CEC.
2. Activate the Control option HDMI (Anyview Cast on older models).
3. In the menu of the console Rostelecom find the section Settings → TV control and turn it on. CEC-control.
4. Reboot both devices (set-top box and TV).

After setting up the console console should:

• 🔊 Adjust the volume of the TV.
• 📺 Turn on/off the TV with the console.
• 🔄 Switch the entrances to HDMI, prefix.

After inclusion HDMI-CEC The remote control Rostelecom does not control volume, check the sound settings in the console: go to Settings → Sound. → Output signal and select HDMI (PCM) instead SPDIF.

Method 3: Manual code programming (for IR remotes)

If the automatic synchronization is not working, HDMI-CEC It's not supported, you just have to manually code the TV, and this is a method that's suitable for universal IR remotes by Rostelecom (e.g., models). RT-DU02 or RT-DU03).

Step-by-step:

1. Turn on the Xiaomi TV and point the remote to it.
2. Press the buttons. TV (or STB, if the remote is universal) and OK 3 seconds at the same time until the LED flashes.
3. Enter a 4-digit code for Xiaomi (see table below). After each digit, the LED should blink.
4. Press. OK If the TV reacted (for example, turned off), the code fits.

If the code doesn't fit, repeat the procedure with a different value. Here are the current codes for Xiaomi. TV (2026):

If none of the codes worked:

• 🔍 Try the codes for Android TV: 0000, 0009, 0020.
• 📞 Contact Rostelecom for support at 8 800 100 08 00 and specify the code for your remote model.
• 🔄 Update the TV firmware: Settings → On TV. → Updating the system.

5. Method 4: Using the original Xiaomi remote to set up

If you still have a native Xiaomi remote, you can use it to tie the remote to Rostelecom via the TV menu. TV 9.0 and newer.

Instructions:

1. Turn on the TV with the original remote.
2. Go to Settings. → Input devices → Customization of the remote.
3. Select Add the remote control and follow the instructions on the screen.
4. When the system asks you to press a button on the new remote, use the Rostelecom remote (for example, press the button). OK or Loudness+).
5. Wait for confirmation of synchronization.

If this method didn't work:

• 🔄 Restart the TV in Safe Mode: Hold the Source + Loudness− on the original remote when switched on.
• 📥 Update the Android app TV Remote Service via Google Play on TV.

💡

If you lose the original Xiaomi remote, you can temporarily replace it with a smartphone.Install the Mi Remote app (available for Android and iOS) and connect to the TV via Wi-Fi or Bluetooth.

6. Solving common problems

Even after successful synchronization, there can be failures.-5 problems and solutions:

Problem 1: The Rostelecom remote controls the console, but not the TV.

• 🔹 Check if it's on. HDMI-CEC (see method 2).
• 🔹 Put the remote on mode. TV (if there's a switch).

Problem 2: The TV doesn't respond to the volume buttons.

• 🔹 In the console menu, select Settings → Sound. → Volume control → Through HDMI.
• 🔹 Update the console firmware (in the Settings menu) → System system → Update of the PO).

Problem 3: The remote only works from a close range.

• 🔹 Replace batteries (even if they seem to work).
• 🔹 Make sure there are no obstacles between the remote and the IR receiver of the TV.
• 🔹 Wipe the IR transmitter with an alcohol napkin (dust blocks the signal).

Problem 4: After the firmware update, the remote stopped working.

• 🔹 Reset the remote settings: press down TV + OK 10 seconds.
• 🔹 Re-enter the code (see Method 3).

Problem 5: The buttons on the remote do the wrong thing (e.g., the guide turns on Netflix).

• 🔹 Reassign buttons in the Settings menu → Input devices → Tune buttons.
• 🔹 Reset the remote to the factory settings (instructions in the device passport).

💡

If neither of these methods worked, the problem could be hardware incompatibility, in which case the only solutions would be to use two remotes (from the console and from the TV) or buy a universal remote with training support (for example, Logitech Harmony).

7. Alternative ways to control Xiaomi TV

If you can not connect the remote with the TV, consider the alternatives:

1. Mi Remote app (for smartphone)

• 📱 Install Mi Remote from Google Play or App Store.
• 🔗 Connect to your TV via Wi-Fi or Bluetooth.
• 🎮 Use your smartphone as a remote (all Xiaomi models are supported) TV).

Voice control

• 🎤 On Xiaomi remotes with a microphone (for example, Mi). TV Voice Remote) Press the Google Assistant button.
• 🗣️ Tell the command, for example: "Turn on the First channel on Rostelecom».

3. Universal remotes with training

• 🛒 Buy a remote with Learning feature (e.g. BroadLink) RM4 Xiaomi Mi Universal Remote).
• 📶 Set it up by “training” the signals of the original Xiaomi remote and the Rostelecom remote.

4. Management through HDMI-CEC other devices

• 🖥️ Connect to the Xiaomi TV device with HDMI-CEC (For example, the Xiaomi Mi Box or NVIDIA Shield).
• 🔄 Now the remote from this device will be able to control the basic functions of TV.

FAQ: Frequent questions about connecting the remote by Rostelecom to Xiaomi TV