How to connect the remote with the TV Xiaomi: all ways + mistake-making

Modern Xiaomi TVs (series Mi) TV 4/5, Redmi Smart TV, Xiaomi TV A) is often used with Rostelecom's interactive TV set-top boxes, but controlling two remotes, from the TV and from the console, creates discomfort. Fortunately, the Rostelecom remote can be paired with a Xiaomi TV to control it directly: To change channels, adjust volume, and even turn the screen on/off. In this article, we will discuss all working methods, from automatic settings to manual code entry, as well as solve typical problems (for example, when the remote control "can't see" the TV or works with a delay).

It is important to understand: the pairing process depends on the model of the remote by Rostelecom (the old version with an infrared port or the new version with Bluetooth) and the firmware version of your Xiaomi TV. If you have a prefix. STB Rostelecom (e.g., Rostelecom, SML-282 or SML-482), The remote can be programmed to control the TV without any additional devices. TV Stick or Mi Box will be different – we will talk about this below.

Before you start, check:

• 🔋 Are batteries charged in the remote (even a weak charge can knock down the signal).
• 📺 Xiaomi TV is connected to the same network as the console Rostelecom (for Bluetooth remotes).
• 🔄 There's a button on the remote. TV or STB/TV — She's switching control mode.

1. Determine the type of remote by Rostelecom: infrared or Bluetooth

The whole pairing algorithm depends on the type of remote, so to avoid wasting time, we first identify the model:

Infrared (IR) remote:

• 📶 On the top there is a transparent plastic “eye” – an IR signal emitter.
• 🔢 No Bluetooth button or icon BT.
• 🔋 It works only in the line of sight of the TV (up to 8 meters).

Models.

SML-282

SAM-3500

Bluetooth remote:

• 📲 No visible IR emitter (or hidden under the body).
• 🔵 There is a Bluetooth button or icon BT backside.
• 🌐 Works at a distance of up to 10 meters, even through walls.

Models.

SML-482

SML-582

⚠️ Note: If your remote control Rostelecom controls only the console and does not have a mode TV, It is impossible to pair with a Xiaomi TV, in which case use a universal remote (for example, Xiaomi Mi Remote) or configure control through the device. HDMI-CEC (about this in section 5).

2.Infrared remote interface Rostelecom with Xiaomi TV

For IR remotes, you can manually enter code or auto-search.

Method 1: Auto-search code

1. Turn on the Xiaomi TV and point the remote to the IR receiver (usually at the bottom of the screen).
2. Press the buttons. TV + OK 3 seconds until the red light is lit.
3. Press. 9-9-1 (Auto search activation code. The indicator should flash twice.
4. Press it. CH+ (switching channels forward until the TV is turned off.
5. Press immediately. OK, preserve the code.

Method 2: Manual code entry for Xiaomi

• 🔢 Codes for Xiaomi Mi TV 4/5: 0178, 0145, 0030.
• 🔢 Codes for Redmi Smart TV: 0128, 0056.
• 🔢 Universal codes: 0001, 0009.

Instructions for input

1. Hold it. TV + OK flashing.
2. Enter. 4-cipher code (e.g, 0-1-7-8).
3. Press Power - if the TV turns off, the code fits.
4. Save the setting with the button OK.

Check the batteries in the remote.

Direct the remote to the IR receiver of the TV

Make sure there are no obstacles between the remote and the TV

Write codes for your Xiaomi model-->

⚠️ Note: If the remote controls volume only after entering the code, but does not switch channels, then a partially compatible code is selected. Try another one from the list or reset the remote settings (press the box). TV + Power for 10 seconds).

3.Setting up a Bluetooth remote by Rostelecom for Xiaomi TV

Bluetooth-based remotes Rostelecom (for example, for consoles) SML-482) They mate through the TV menu. TV Must support Bluetooth 4.2+ (All models from 2019).

Step-by-step:

1. Turn on the TV and go to Settings → Devices → Bluetooth.
2. Activate the search mode (Add the device).
3. On the Rostelecom remote, press it. TV + OK 5 seconds until the blue light flashes.
4. In the list of found devices, select Rostelecom Remote (or similar name).
5. Confirm the pairing on the TV and remote (entry may be required) PIN-code - usually 0000 or 1234).

If the TV doesn't find the remote:

• 🔄 Reboot both devices.
• 📱 Make sure that in the settings Xiaomi TV Bluetooth Detection Mode enabled.
• 🔋 Check the battery charge of the remote (at low charge, Bluetooth may not work).

💡

If the buttons of the remote are not working correctly after pairing (for example, Volume)+ opens the menu), reset the remote settings to the factory: press TV + Back + OK 10 seconds. Then repeat the pairing.

4.Management of Xiaomi TV through HDMI-CEC (remote-programmed)

If pairing fails or the remote does not support your Xiaomi model, use the technology HDMI-CEC. It allows you to control the TV through the prefix Rostelecom, connected to the HDMI.

How to turn HDMI-CEC on Xiaomi TV:

1. Go to Settings. → Devices → HDMI-CEC.
2. Activate the Control option HDMI (or Simplink/Anynet+, model-wise).
3. In the settings of the consoles Rostelecom turn on HDMI Control (usually in the System Settings section).

What can be controlled through HDMI-CEC:

• 📺 Turning on / off the TV with the Power button on the console.
• 🔊 Volume control.
• 🔄 Switching inputs HDMI (If there are multiple devices connected to the TV).

Limitations

• ❌ You cannot switch TV channels (only consoles).
• ❌ Menu and Home buttons are not working for TV.

5 Problem Solving: The remote does not match or works with errors

Even after the right setup, there may be failures, and let's look at the typical errors and how to fix them:

Problem 1: The remote does not respond to the TV

• 🔦 Check if the remote is directed to the IR receiver (for infrared models).
• 🔋 Replace batteries (even if they are “nearly new").
• 🔄 Reboot the TV: Settings → On TV. → Reboot.
• 📱 For Bluetooth remotes: remove the device from the list of conjugated and connect again.

Problem 2: The buttons are not working properly

• 🔢 Try another code from the table (section 2).
• 🔧 Reset the remote settings (click on it) TV + Power for 10 seconds).
• 📋 Check if the remote is in conflict with other IR devices (e.g. air conditioning).

Problem 3: Latency in pressing buttons

• 📶 For Bluetooth remotes: make sure there is no interference from other wireless devices (Wi-Fi router, microwave).
• 🔄 Reconnect the remote in Bluetooth settings.
• 📱 Update the TV firmware: Settings → On TV. → Updating the system.

⚠️ Note: If after the firmware update Xiaomi TV The remote stopped working, reset its settings and pair it again. MIUI TV User control codes are sometimes reset.

💡

If none of these methods worked, check the compatibility of your remote model with Xiaomi. TV on the official website of Rostelecom in the section "Support". It may be necessary to replace the remote with a universal one (for example, Xiaomi Mi Remote Controller).

6. Alternative ways to manage Xiaomi TV

If pairing the remote by Rostelecom is not possible, consider alternatives:

1. Universal remote Xiaomi Mi Remote

• 📱 Supports IR and Bluetooth, compatible with all Xiaomi models TV.
• 🔧 Configures through the Mi Home app.
• 💰 Cost: ~1 500 rubles.

2. Smartphone control

• 📱 Install the Mi app TV Remote (Android/iOS).
• 🔗 Connect to the same Wi-Fi network as the TV.
• 🎮 Full functionality: channel switching, sound adjustment, application launch.

Voice control

• 🎤 Turn on Google Assistant on Xiaomi TV (in the settings of Voice Search).
• 🗣️ Commands: "OK Google, turn on the TV", "Revenue volume by 20%".
• 🔌 Requires a microphone (built-in or external, such as Xiaomi) AI Speaker).

4.Xiaomi's console TV Stick

• 📦 Connect to HDMI-Port, operated by Xiaomi's native remote.
• 🎬 Gives access to Google TV and streaming services.
• 🔄 You can connect the remote with Rostelecom via Bluetooth (as in Section 3).

7. Frequent Questions and Answers (FAQ)

8 Conclusion: Which way to choose?

The choice of pairing method depends on the type of remote and the model of the TV:

• 🔦 IR remote: use manual code entry (section 2) or auto-search. TV until 2022.
• 🔵 Bluetooth remote: configure pairing via the TV menu (Section 3). TV 5, Xiaomi TV A2 newer.
• 🔌 The prefix Rostelecom: activate HDMI-CEC (section 4) for basic management.
• 📱 No compatibility: use alternatives – universal remote, smartphone or voice control (section 6).

The most important thing is that if your Xiaomi TV Released before 2019 (e.g. Mi) TV 4A 2018), it may not support Bluetooth remotes Rostelecom. in this case, only the IR setting or HDMI-CEC.

If none of these methods worked, please contact Rostelecom for support with the models of your TV and remote – they can provide a customized pairing code or recommend a compatible replacement.