How to prescribe a remote to a Xiaomi TV: instructions for all models (2026)

Did you buy a new Xiaomi TV or lose your native remote, and the universal refuses to work? TV, Redmi Smart TV series-model P1/P1E It's not really that easy to do, but it's not that much. 5 minutes – if you know the correct codes and sequence of actions.

In this article, we will look at all the ways to prescribe a remote to Xiaomi TVs, from the standard synchronization of the original remote to manually entering codes for universal devices. Separately, we will focus on typical errors (for example, when the remote is flashing but not connecting) and how to fix them. If your TV does not respond to commands or requires re-assignment after reset, here you will find a solution.

Important: instructions are relevant to all modern Xiaomi models (2018–2026 (d) including Mi TV 4A/4S/4X, Mi TV 5/5X/5 Pro, Redmi Smart TV X and Xiaomi TV P1/P1E. For older TVs (up to) 2017 An alternative method may be required, and we will describe it.

1.Preparation: What to check before tethering the remote

Before you start syncing, make sure that the problem is in the remote settings, not the hardware malfunction.

Check the batteries (replace them with new ones, even if the old ones “seem to work”)

Make sure there are no obstacles between the remote and the TV (glass, mirrors, walls)

Turn off sources of infrared interference (lamps, other remotes, sunlight)

Reboot the TV (remove the plug for 30 seconds)

Try to control the TV with buttons on the case (if any)-->

If the Xiaomi TV doesn't respond to even the buttons on the body, the problem may be the system freezes.

1. Turn off the TV power for 1 minute.
2. Press and hold the Power button on the body for 10-15 seconds.
3. Connect the power back and try to turn on the TV button on the case.

⚠️ Warning: If the TV starts after the power reset, but the remote still doesn't work, don't rush to re-prescribe it. First check if the infrared port settings in the service menu are lost (this is in the section about resetting settings).

For universal remotes (One For All, Huayu, Supra, etc.) additionally check:

• 🔋 Compatibility of the remote model with Xiaomi TV (The list of supported brands is usually listed on the packaging).
• 📶 Mode of operation: some remotes require switching to mode TV or STB.
• 🔍 The codes for Xiaomi are in the instructions (if they are not available, use the method of automatic search).

2. Method 1: Standard synchronization of the original Xiaomi remote

Original Xiaomi remotes (such as Mi Remote or Xiaomi) TV Remote connects to the TV automatically when you first turn on. If the binding is lost (for example, after updating the firmware or resetting the settings), follow the following steps:

Instructions for Bluetooth remotes (Mi) TV 5/5X, P1/P1E, Redmi Smart TV X):

1. Turn on the TV with a button on the body.
2. Press and hold the Menu buttons. + OK on the remote simultaneously for 5 seconds until the indicator starts to blink.
3. Put the remote at a distance of 10-15 cm from the TV.
4. On the TV will appear a notification about the connection – confirm it with a button OK.

Instructions for IR panels (Mi) TV 4A/4S/4X, model):

1. Turn on the TV.
2. Press and hold the Menu. + Volume+ remote 3-5 seconds.
3. The indicator on the remote should light up red and go out - this is a signal of successful synchronization.
4. Check the buttons (if you don’t respond, repeat the procedure).

💡

If the original Xiaomi remote doesn’t sync, try resetting it: remove the batteries, press and hold any button for 20 seconds, then insert the batteries back and re-tether.

For voice-controlled models (e.g. Mi) TV 5 Pro or Xiaomi TV P1E) After synchronization, additional microphone settings may be required:

1. Go to Settings → Devices → Remote DU.
2. Select the Voice Control setting.
3. Follow the instructions on the screen (usually you need to say the test phrase).

3. Method 2: Prescription of a universal remote (codes for Xiaomi)

If you use a universal remote (One For All, Huayu, Supra, BBK etc.), for synchronization with Xiaomi TV You'll need to enter a special code. Below are the current codes for popular remote models:

How to enter the code:

1. Turn on the TV with a button on the body.
2. On the remote, press and hold the SET (or CODE SEARCH) until the indicator flashes.
3. Enter the 4-digit code using digital buttons.
4. Press. OK or POWER — If the TV is off, the code fits.

Automatic code search (if manual input fails):

1. Hold the SET until the indicator flashes.
2. Press. POWER Hold it until the TV is turned off (may take up to 2 minutes).
3. After you turn off the TV, press OK code-saving.

⚠️ Note: Some universal remotes (e.g., One for All) URC 7960) require pre-configuring the Xiaomi brand in the menu. If after entering the code, the remote controls only basic functions (on/off, volume), check if your model supports advanced commands for Android TV.

Method 3: Remote binding via service menu (for experienced)

If standard methods don’t work, you can try resetting your infrared port or Bluetooth module via the service menu. TV (Like Mi. TV 4X/5X, P1E).

How to open the service menu:

1. Turn on the TV.
2. On the original remote, press sequentially: Back (←) → Home (🏠) → Back up (←) → Home (🏠) → Back up (←) → Home (🏠) → Up (↑) → Up (↑) → Up (↑)
3. The Developer Options menu will open.

Resetting the remote settings:

1. In the service menu, select Remote Control or IR Settings.
2. Press Reset Pairing or Clear IR Codes.
3. Confirm the reset and restart the TV.
4. After restarting, repeat the standard remote synchronization procedure (see Method 1).

Reset Bluetooth module (for Mi) TV 5/P1/P1E):

1. In the service menu, select Bluetooth Settings.
2. Press Unpair All Devices.
3. Go back to the basic settings and try to reconnect the remote.

⚠️ Warning: Do not change other options in the service menu unless you are sure of their purpose. Incorrect settings can lead to loss of warranty or unstable operation of the TV. HDMI CEC Backlight without knowing the consequences can disrupt the port or backlight.

💡

Resetting via the service menu helps in 80% of cases when the remote stops working after updating the firmware or resetting the TV settings.

5. Solving typical problems when prescribing the remote

Even when you synchronize the remotes properly, they can malfunction, and here are the most common problems and solutions.

• 🔴 The remote blinks, but the TV doesn't respond: Check if the IR receiver on the TV is blocked (usually located at the bottom right or left). TV, not DVD or STB. For Bluetooth remotes, reboot the TV and re-tether.
• 🔄 Remote works, but not all buttons: For universal remotes, check if the model supports advanced features (e.g. Netflix, Prime Video). Update the TV firmware: go to Settings → On TV. → Update system. Reset the remote settings to factory (usually with the Reset button on the back panel).
• 🔋 Remote discharges quickly: Replace batteries with alkaline batteries (such as Duracell or Energizer). Check if the button is accidentally pinched (this leads to constant signal transmission). For Bluetooth remotes, turn off voice control if you do not use it.

Special cases:

• 📺 The TV doesn't turn on from the remote or from the buttons: Check the power supply (the indicator on the case should burn orange when turned off). Turn off the TV from the outlet for 5 minutes, then plug back in. If the indicator does not burn - the problem in the power supply (requires repair).
• 🔄 After updating the firmware, the remote stopped working: Reset the TV settings to factory: Settings → The device → Reset → Reset all settings. If the reset didn't work, roll back the firmware through Settings. → On TV. → Updating the system → Recoil (not available on all models).

6.Alternative ways to control the Xiaomi TV

If you can’t prescribe the remote control, you can control the Xiaomi TV in other ways:

• 📱 Mi Remote app (for smartphones): Download the Mi Remote app from Google Play or the App Store. → Xiaomi. Follow the on-screen instructions for sync (requires connection to one Wi-Fi network).
• 🖥️ Managing PCs through Android TV Remote Control: Install an extension for Chrome – Android TV Remote Control. Connect to your TV via Wi-Fi (remote control in settings should be enabled on TV).
• 🎮 Game controllers (DualShock, Xbox): Connect the gamepad via Bluetooth via Settings → Devices → Use the gamepad buttons to navigate the menu (the analogue of the D-pad replaces the arrows of the remote).
• 🔊 Voice control (for models with a microphone): Activate the voice assistant with the microphone button on the remote or say "OK, Google." Examples of commands: "On Netflix", "Increase volume by 20".

How to turn on the TV without remote control:

• Use the Power button on the body (usually located on the side or bottom).
• For models without mechanical buttons (e.g. Mi) TV 5 Pro) connect the keyboard or mouse over USB — TV turns on automatically.
• If the TV supports Wake-on-LAN, send the Magic Packet from another device on the network (technical skills required).

💡

If you lose the remote often, set up automatic turn on on schedule: go to Settings → System system → Timer on/off and set a convenient time.

7.How to avoid remote control problems in the future

In order not to face the need to re-register the remote, follow these recommendations:

• 🔋 Batteries: Use alkaline batteries (not rechargeable) change them every 6 to 12 months, even if the remote is running. Remove the batteries if you haven't used the remote for more than a month.
• 📶 Conditions of use: Keep the remote control at a distance of no more than 8 meters from the TV. Avoid direct sunlight on the IR receiver. Do not drop the remote control - shocks can damage the quartz resonator.
• 🔄 Updates: Update your TV firmware regularly (every 2-3 months). After updating, check the remote and repeat the sync if necessary.
• 🛠️ Backup options: Configure control via smartphone (Mi Remote app). Buy a spare original remote (the article can be found in the instructions for the TV).

What to do if the remote is out of order:

• The original Xiaomi remotes can be ordered on AliExpress or in branded stores (for example, mi.com).
• For universal remotes, choose models with protocol support NEC and 38 kHz frequencies.
• If the TV is guaranteed, contact the service center - sometimes the remotes are replaced for free.

💡

The most common reason Xiaomi remotes break is oxidation of the contacts of the batteries. To avoid this, wipe the contacts with alcohol once every six months and store the remote in a dry place.

FAQ: Frequent questions about the registration of the Xiaomi remote