Linking the remote from Rostelecom to the Xiaomi TV is a challenge that many interactive TV users face. Although both devices support universal control protocols, their synchronization is not always smooth. In this article, we will discuss all the current ways of connecting, including manual code entry, automatic configuration and solving typical errors.
Feature of Xiaomi Mi TVs TV (Mi series TV 4/4S/4A/5/5X/Q1/Q2) It's a process that involves using your own IR protocol, which is not always correctly recognized by third-party remotes, but with the right approach and the right compatibility codes, you can get the Rostelecom remote control to control the basic functions: switching channels, adjusting volume and accessing the menu.
It is important to note that the process may vary depending on the remote model (e.g. STB-100/200/300) and the firmware version of the TV. If standard methods do not work, don’t be too quick to give up the idea: there is a section in the article with alternative solutions, including the use of HDMI-CEC and third-party applications.
Preparation for binding: what to check before setting up
Before you start synchronization, make sure that the basic conditions are met:
- 🔋 The Rostelecom remote is serviceable: check the operation of the batteries (replace them if necessary) and the integrity of the IR transmitter (visually inspect the LED on the end of the remote control).
- 📺 Xiaomi TV is on and on standby (the indicator is red or blue).Some models require prior transfer to steam locomotive mode (hold the Source button for 5 seconds).
- 📡 There are no obstacles between the remote and the TV: the IR signal does not pass through walls, furniture or glass. The maximum distance for stable operation is 5-7 meters.
- 🔄 The TV has power saving features disabled, which can block external commands (check Settings). → Energy conservation → Standby regime).
If you use a Rostelecom set-top box (such as SML-482 or MAG-324), make sure it is connected to the TV via HDMI and is on. In some cases, the remote is synchronized automatically via HDMI-CEC, but for this, the function must be activated in the settings of both devices.
⚠️ Note: If your Xiaomi TV is running Android TV 10+, Standard codes may not work due to the changed IR control protocol, in which case you will need to update the remote firmware or use alternative methods (see Section 5).
Method 1: Automatic setting of the remote by Rostelecom
Most Rostelecom remotes support autosearch, which consistently tests all available codes for your TV model, a method that is recommended to try first, as it does not require manual input.
Step instructions:
- Turn on the Xiaomi TV and put it in standby mode (power button on the remote from Xiaomi).
- On the Rostelecom remote, simultaneously press the TV (or STB, if not) and OK buttons for 3-5 seconds until the indicator flashes twice.
- Enter 991, which is a command to run the search engine.
- Point the remote to the TV and press the CH+ (or VOL+) button until the TV turns off, which means that the working code has been found.
- Confirm the choice by pressing OK. The indicator on the remote should blink 4 times.
If the TV doesn't respond after 20 to 30 clicks of CH+, then the automatic search didn't work, in which case you go to manually entering the codes (mode 2).
☑️ Preparation for search
Method 2: Manual code entry for Xiaomi TVs
If the autosearch didn’t work, try entering compatibility codes manually. Below is a table of current codes for different Xiaomi TV series and remote models by Rostelecom:
| Xiaomi TV model | Code for remote control Rostelecom (STB-100/200) | Code for remote control Rostelecom (STB-300/400) | Notes |
|---|---|---|---|
| Mi TV 4A/4S (2018–2020) | 0178, 0030 | 1178, 1030 | You may need to re-enter after the TV reboot |
| Mi TV 5/5X/5 Pro | 0145, 0056 | 1145, 1056 | For Android TV 11+ models, try the 0221 code. |
| Mi TV Q1/Q2 (2021–2023) | 0209, 0012 | 1209, 1012 | Possible problems with Netflix and Prime Video buttons |
| Redmi Smart TV X | 0187, 0043 | 1187, 1043 | Required to disable the game mode in the TV settings |
How to enter the code manually:
- Hold the TV (or STB) button on the Rostelecom remote for 5 seconds until the indicator blinks twice.
- Enter a 4-digit code from a table (e.g., 0178 for Mi TV 4A).
- Point the remote to the TV and press OK. If the code fits, the TV will turn off or switch the signal source.
- To save the settings, press TV again.
⚠️ Note: If not all buttons are running after you enter the code (e.g., volume is not controlled), try alternative code from the same row of the table.
What if no code fits?
Method 3: Synchronize via HDMI-CEC (if the remote is not IR)
If your Rostelecom remote controls the console, rather than the TV directly, you can use HDMI-CEC protocol, which allows you to transfer commands from the console to the TV via HDMI cable, which works for most Xiaomi Mi TV models, but requires pre-tuning.
How to turn on HDMI-CEC:
- On Xiaomi TV, go to Settings → Devices and Accessories → HDMI-CEC.
- Activate Control via HDMI (or Simplink/Anynet+, depending on the firmware version).
- On the console Rostelecom go to Settings → System → HDMI-CEC and turn on the function.
- Restart both devices (unplug for 30 seconds).
After activation, you will be able to:
- 🔊 Control the volume of the TV with buttons VOL+/VOL- console.
- 📺 Turn on/off the TV with the power button remote.
- 🔄 Automatically switch the signal source to HDMI-prefix.
Important: On some Xiaomi models (e.g. Mi TV Q2 75), HDMI-CEC may conflict with voice control. If voice assistant commands stop working after setting up, disable CEC or update the TV firmware.
Solving the problems: why the remote does not work with Xiaomi
If none of these methods worked, check the following points:
| Problem. | Possible cause | Decision |
|---|---|---|
| Remote is not responding to pressing | Batteries are discharged or the IR transmitter is defective | Replace the batteries. Check the remote on another device (such as an air conditioner). |
| TV doesn't respond to codes | The IR receiver of the TV is contaminated or damaged | Wipe the receiver (located at the bottom or side of the screen) with a cotton swab dipped in alcohol. |
| Not all buttons work. | Compatibility code supports only basic functions | Use a combination of remotes: the main commands are from the Rostelecom remote, the rest are from the native Xiaomi remote. |
| The remote "forgets" settings after turning off | Resetting settings of the console or TV | Repeat the binding. Turn off the Quick Start function in the TV settings. |
If the problem persists, try resetting the remote to factory settings:
- Remove the batteries from the remote for 10 minutes.
- Hold the buttons 1 and 7 at the same time, inserting the batteries back.
- The indicator should blink 3 times - this is a signal of a successful reset.
💡
If your Xiaomi TV is Bluetooth-enabled, you can use the Mi Remote app (available on Google Play) to control your smartphone TV, a temporary solution until you set up the Rostelecom remote.
Alternative ways of managing: if nothing helps
If standard methods do not work, consider the following options:
- 📱 Universal remotes: Applications like Unified Remote or Yatse allow you to control your TV over Wi-Fi.
- 🖥️ Voice control: Xiaomi TVs with Google Assistant support commands like "OK Google, turn on TV on Channel 5".
- 🔌 USB-IR adapter: Devices like BroadLink RM4 can emulate signals native Xiaomi remote. the cost is from 1500 rubles.
- 🔄 Replacement of the remote: Original remotes for Mi TV (For example, Xiaomi Mi TV Remote: cost from 1000 rubles and are guaranteed to be compatible.
For owners of consoles Rostelecom based on Android TV (for example, SML-5284), there is another option - to use the application "DU Remote" from Google Play. It allows you to configure a virtual remote for your TV model, but requires constant connection of the smartphone.
💡
If your Xiaomi TV is released after 2022, chances are it’s using an updated IR protocol, in which case the only working solution is HDMI-CEC or buying the original remote.