How to tie a new remote to a TV Xiaomi Mi: 5 proven ways

Lost your native remote from Xiaomi Mi TV or bought a universal? Do you know how to make it work with a TV? In this article, you will find step-by-step instructions for all Xiaomi models, from the budget Mi TV 4A to the flagship Mi QLED TV 75. We will analyze not only the standard binding through the menu, but also alternative methods if the remote does not sync.

Xiaomi's remote problems often occur after updating firmware, resetting or using third-party devices. 90% of the time, the solution takes no more than 5 minutes - the main thing is to know the correct sequence of actions and nuances for a particular model. If you have tried to tie the remote, but nothing has worked, check the section "Typical errors" - there are unique chips that are not written in the official instructions.

1.Preparation: What to check before binding

Before you try to sync the remote, make sure the problem isn't with the TV itself or the power supply.

• 🔋 Check the batteries in the remote, even if they're new, the contacts could have oxidized. Try replacing them with a known working one.
• 📺 Make sure the TV is on and reacts to the power button on the case (if any). TV P1 And the newer button is hidden under the logo.
• 📡 Remove obstacles between the remote and the IR receiver of the TV (usually located at the bottom right or left of the screen.
• 🔄 Reboot the TV: press the power button on the case for 10 seconds (for models without a mechanical button - disconnect from the socket for 1 minute).

If you use a universal remote (such as from BBK or Huayu), first set it up to work with Xiaomi.

1. Find the code for Xiaomi TV in the remote instructions (usually 0178, 0180 or 0185).
2. Press the SET (or CODE) button on the remote until the indicator flashes.
3. Enter the code and release the button. The remote should blink 2 times - this means that the setting was successful.

💡

If you have a Xiaomi Mi Remote with Bluetooth (models 2021 and newer), before binding, turn on Bluetooth on the TV in the Settings → Devices → Bluetooth menu.

2. Standard binding via the TV menu (for native remotes)

This method works for Xiaomi’s original remotes (including voice-controlled and Bluetooth models), and is relevant for MIUI TV firmware 3.0 and higher:

1. Turn on the TV with a button on the case or through the Mi Home mobile app.
2. Go to Settings → Devices → Remote DU (on some models the path: Settings → System → Accessories → Remote DU).
3. Select Add Remote or Sync Remote.
4. Press and hold the OK + Volume Down (or Back + Home for touch panel remotes) buttons on the remote for 5 seconds until the indicator starts flashing.
5. Wait for the message on the “Connected” screen (usually takes 10–30 seconds).

If the remote does not work after these actions:

• 🔄 Repeat the procedure by holding the buttons. OK + Volume Up (alternative combination for older models).
• 📱 Try to tether the remote via the Mi Remote app (available for Android and iOS).

Make sure the remote is original (there should be a sticker with the Xiaomi logo on the back) | Check the TV firmware version (up to date - at least 2.0.185) | Disable other IR devices in the room (air conditioners, music centers) |Repeat synchronization at a distance of no more than 1 meter from the TV-->

3. Bluetooth remote binding (for 2020 and newer models)

Xiaomi Mi TV Q1, Q2 and P1 support Bluetooth remotes with voice control.

1. Activate Bluetooth on your TV: Settings → Network and Connections → Bluetooth.
2. Press and hold the Mi button (with logo) + Voice search on the remote for 7 seconds until the indicator flashes quickly.
3. In the list of available devices on your TV, select Mi Remote Controller (or similar name).
4. Confirm the pairing on the TV and remote (may need to enter) PIN-code 0000 or 1234).

If the remote is not detected:

• 🔧 Reset its settings: Remove the batteries, press any button for 10 seconds, then insert the batteries back.
• 📲 Update the TV firmware: Settings → On TV. → Updating the system.

4. Alternative binding methods (if the standard method does not work)

If the TV doesn’t respond to standard synchronization, try these methods:

For Mi models TV Stick (if you use it as an external tuner) the remote is tied via the Settings menu → Devices → DU remote for TV Stick, you might need to flash the remote through here. USB-cable (instructions attached to the device).

Original Xiaomi (IR)|Original Xiaomi (Bluetooth)|Universal remote |Remote from another TV |I don't know-->

5. Common Mistakes and How to Avoid Them

Remote binding errors are often due to firmware incompatibility or hardware problems, and here are the most common cases and solutions:

⚠️ Attention: If the TV is Mi TV 4A (2018 model after updating to MIUI TV 3.0 stopped seeing the remote, roll back the firmware through USB. Instructions and firmware files are available on the official forum Xiaomi Community.

• 🔴 The remote blinks but doesn't sync: Check if it conflicts with other IR devices (like air conditioning.
• 🔴 The TV does not respond to buttons after being tied: Reset the remote settings (see section 4) or check if the Child's Lock mode is enabled (Settings) → Parental control).
• 🔴 Bluetooth remote connects but shuts down after 5 minutes: Turn off power saving mode in Bluetooth settings (Settings) → Network → Bluetooth → Advanced settings → Energy conservation).

If you use a remote from another Xiaomi TV (for example, from Mi TV 4S trying to connect to Mi TV Q1), note that they may not be compatible due to different communication protocols.

💡

On the Mi TV ES (2022), the remote is only tethered via Bluetooth, and the IR port in these TVs is used only for service functions.

6.Configuring the remote after tethering

After successful synchronization, it is recommended to personalize the remote:

• 🎮 Assign hotkeys: In the Settings menu → DU remote → You can reassign the functions to the button settings, like double-clicking Home to launch Netflix.
• 🔊 Adjust the sensitivity of the microphone: For Bluetooth remotes with voice control go to Settings → Voice search → Microphone sensitivity.
• 🔋 Enable battery discharge notifications: Activate the option in Settings → Notifications → Status of DU remote.

For Android TV models (such as Mi TV 4X), you can install the Button Mapper app from Google Play to assign the remote buttons to run any applications or commands.

⚠️ Attention: On Mi TVs TV A2 (2023 budget series) Reassignment buttons disabled at firmware level. Attempt to change settings may cause system instability.

7 What should I do if nothing helps?

If you have tried all the ways, but the remote did not work, here are the extreme measures:

1. Resetting the TV to factory settings: Go to Settings → On TV. → Reset settings. Enter PIN-code (default 1234 or 0000) Re-bind the remote after rebooting.
2. Manual firmware update: Download the current firmware for your model from Xiaomi Support. Copy update.zip file to a flash drive (FAT32 format). Connect the flash drive to your TV and run the update through Settings → System Update → USB Update.
3. Contacting the service center: If the remote is original, but it doesn't work even after the TV is reset, there may be a hardware malfunction of the IR receiver or Bluetooth module, in which case diagnostics are required.

For Mi TV Lux and Mi TV Master (premium series) before resetting, be sure to back up via Settings → System → Backup. In these models, the reset also deletes Mi Account data, which can lead to blocking of Smart TV features.

FAQ: Frequent questions about Xiaomi remotes binding