Connecting Xiaomi TV Stick 4K TV: full instructions with photos and tips

Xiaomi TV Stick 4K

Google Play Market

Netflix

Disney+

voice-control

Google Assistant

HDMI

In this article, we'll look at all the stages of connection, from physical connection to fine-tuning of image and sound, and focus on the typical problems: why. TV Stick is not defined by TV, how to avoid artifacts when output 4K@60Hz, And what to do if the remote doesn't respond. 2023–2026 It is compatible with most TVs (Samsung, LG, Sony, TCL etc.).

If you just unpacked Xiaomi TV Stick 4K And you don't know which side to go from, don't worry, because it takes 10 minutes to connect, and our tips will help you avoid common mistakes. USB, why the device is not turned on or is trying to use HDMI-ARC A port that's not always compatible with consoles.

1.What is included in the kit Xiaomi TV Stick 4K and what else will be needed

Before connecting, check the contents of the box. The standard set includes:

• 📦 The Xiaomi device TV Stick 4K (black-case)
• 🔌 Cable HDMI → Micro-HDMI (length) ~15cm)
• 🔋 Cable USB Type-C → USB-A feeding
• 📝 Short instructions in several languages (including Russian)
• 🎮 Remote control with batteries AAA

Please note that there is no power supply in the kit.

• 🔌 Port port USB on the TV (if it gives enough current – at least 1A)
• 🔋 Smartphone charger (e.g., Xiaomi or Redmi with Quick Charge support)
• 💻 USB-port of a computer or laptop (not recommended for permanent use)

It's important if the TV doesn't have a free port. USB, You will need to purchase a network adapter with USB-exit (e.g. Xiaomi) 20W USB Using a weak power source can lead to spontaneous reboots or no signal.

2. Choosing the right one HDMI-port-television

Not all ports. HDMI They're the same on TV. TV Stick 4K Critically select a connector that supports:

• 📺 HDMI 2.0 or newer (for withdrawal) 4K@60Hz)
• 🔄 HDCP 2.2 (Content protection required for Netflix, Disney)+)
• 🎮 CEC (for the control of one remote, optionally)

How to determine the appropriate port:

1. Look at the back of the TV - usually the ports are signed (HDMI 1/ARC, HDMI 2 etc.).
2. In the instructions for TV, find the section about HDMI-For example, Samsung has a capability. QLED port HDMI 4 frequently 4K@120Hz.
3. If not sure - connect the console to any port and check in the settings of the TV section External devices → Information on HDMI. This will indicate the approved permit.

💡

If there's a port on the TV HDMI-ARC (It is usually written, it is better not to use it for TV Stick.This port is optimized for sound systems and can conflict with the console, causing image delays or no sound.

Critical information: on television LG OLED 2019–2020 port HDMI 2 often limited to HDMI 1.4 supplantant 4K@60Hz. Use the ports. HDMI 1 or HDMI 3.

3. Step-by-step instructions for connecting Xiaomi TV Stick 4K

Follow this algorithm to avoid errors:

Insert the Micro-HDMI cable into the console and the other end into the selected port. HDMI TV|

Connect the cable. USB Type-C to the console and power source (TV or charger)|

Turn on the TV and select the appropriate signal source (e.g, HDMI 1)|

Wait for the system to boot (the first start can take up to 2 minutes)|

Follow the on-screen instructions for initial setup (language, Wi-Fi, Google account)-->

If the screen is black after the connection:

• ⚡ Check that the cable HDMI squirted on both sides.
• 🔄 Try another port. HDMI TV-wise.
• 🔋 Make sure the console is powered (the indicator on the case should burn white).
• 🔄 Restart the TV (turn off the socket for 30 seconds).

At the configuration stage, the system will offer to connect to Wi-Fi. We recommend using a 5 GHz network for stable streaming. 4K. If your router does not support 5 GHz, make sure that the 2.4 GHz signal is strong enough (at least 70% of the level).

4. Setup of permission and frequency of update

By default, Xiaomi TV Stick 4K can issue permission 1080p, Even if the TV is still on 4K. To change that:

1. Go to Settings → Display and Sound → Screen Resolution.
2. Select the maximum resolution available (for example, 3840×2160 (4K)).
3. In the Update Frequency section, set 60 Hz (if the TV supports).

If you're optional 4K@60Hz Unavailable, the problem may be:

Professional advice: If your TV is supported HDR, activate this option in the settings TV Stick (Settings) → Display and sound → HDR). However, note that on some Samsung models this can lead to overheating of the console – watch the temperature of the case.

5. Connecting the remote and alternative control methods

Xiaomi remote TV Stick 4K It's Bluetooth, so you don't have to point it directly at the console, but for the initial synchronization:

• 🔋 Put the batteries in. AAA (come complete).
• 🎮 Press and hold the back buttons. + Home for 5 seconds to pair up.
• 🔄 If the remote does not respond, restart the console (Settings) → The device → Reboot).

If the original remote is broken or lost, you can control it. TV Stick through:

• 📱 Google appendix TV (available for Android and iOS)

💡

To connect the mouse or keyboard to USB need OTG-Adapter (e.g. Xiaomi) USB-C to USB-A). Without him. USB-The port does not recognize the periphery.

If the remote is unstable (delays, skipping presses), try:

1. Replace the batteries with new ones (even if the old ones seem to work).
2. Reconnect the remote: Settings → The device → Bluetooth → Forget the device, then synchronize again.
3. Update the firmware of the console (Settings) → About the system → Updating the system).

6. Sound tuning: why there is no sound and how to fix it

Lack of sound is one of the most common problems after connecting Xiaomi TV Stick 4K. Causes and solutions:

1. Incorrect audio format

By default, the console can try to transmit sound in Dolby Digital format.+, which some TVs don't support:

1. Go to Settings → Display and Sound → Sound.
2. In the Audio Format section, select PCM (squirrel).
3. If the sound appeared, but became quieter - increase the volume in the TV settings.

Conflict with HDMI-CEC

Function HDMI-CEC It allows you to control the console with the remote control of the TV, but sometimes it blocks the sound:

• On TV: Settings → System system → HDMI-CEC → Turn off (the name of the option may vary: Anynet)+ Samsung has Simplink. LG).
• On the console: Settings → The device → HDMI-CEC → Turn it off.

Problems with external sound system

If you use a soundbar or a receiver, the sound can get lost when you pass through multiple devices.

• Connect. TV Stick directly to the soundbar (if it supports it) HDMI-ARC).
• In the TV settings, select External speakers as the main sound source.
• Check that the cable HDMI Supports Audio Return Channel (ARC).

💡

If there is a sound, but it is interrupted or distorted, try to reduce the sound quality in the settings of the console to 16-bit instead 24-bit. This will reduce the load on the processor and eliminate stuttering.

7. Update firmware and optimize performance

Regular firmware updates fix bugs, add new features and improve service compatibility.To update Xiaomi TV Stick 4K:

1. Connect the console to the Internet.
2. Go to Settings. → About the system → Updating the system.
3. Click Check for Updates and follow the instructions.

If the update “hangs” during the booting stage:

• 🔄 Reboot the console and try again.
• 📶 Connect to 5 GHz network (if you use 2.4 GHz).
• 🔌 Use the Ethernet cable via USB-OTG Adapter (if the Wi-Fi speed is not sufficient).

To optimize productivity:

• 🧹 Clean the cache regularly: Settings → Annexes → All applications → [Select the application] → Clear the cache.
• 🔄 Turn off auto-run of unnecessary apps: Settings → Annexes → Special access → Auto-start.
• 🎮 In the developer settings (Settings) → About the system → Build Number – Press 7 times) Activate Forced Use GPU speed up.

8.Typical errors and their solutions

⚠️ Note: If you have connected Xiaomi TV Stick 4K TV says "No signal", but the indicator on the console is lit white - the problem is incompatibility HDMI-Try another port or update the TV firmware.

Let’s look at the most common problems:

1. The console overheats and turns off

This is typical for Xiaomi models. TV Stick 4K 2022-2023 with long-term use:

• 🌡️ Make sure the console is in a well-ventilated place (not in a closed cabinet).
• 🔌 Use the original power cable – uncertified cables can cause overheating.
• 📉 Reduce the permit to 1080p, if you don't use 4K-content.

2.The remote does not operate at a distance of more than 3 meters

That's the limitation of Bluetooth. LE, The one used in Xiaomi remotes:

• 📱 Use the Google app TV steer.
• 🔄 Reconnect the remote (see Section 5).
• 🛠️ Replace batteries with lithium batteries (they last longer).

3. Apps are not installed or departed

Most often, this is due to a lack of memory or conflict of versions.

• 🧹 Clear the cache and data of the problematic application.
• 📱 Install the application through APK (For example, from apkmirror.com).
• 🔄 Update the console firmware.

⚠️ Note: If the sound is lost on Netflix or YouTube after the firmware update, check the settings DRM (Settings → Annexes → Special access → DRM). Drop them and reboot the console.

FAQ: Frequent questions about Xiaomi TV Stick 4K