How to connect the remote to the TV or Xiaomi console: all ways + fixing

You have bought a new TV Xiaomi Mi TV Or the old remote control stopped syncing after updating the firmware? This problem is familiar to many owners of Xiaomi equipment - especially if we are talking about models that support Bluetooth remotes (for example, Mi Mi). TV Stick or Mi Projector: 80% of the time, it takes less than 5 minutes, but requires a precise follow-up.

In this article, we will discuss all possible ways to connect the remote to Xiaomi devices – from standard synchronization over the infrared port (IR) We will focus on typical errors (for example, code) separately. 10-1004 Or flashing red lights and how to fix them, and if your remote doesn't respond to buttons or your TV doesn't see it, you'll find step-by-step solutions for Mi. TV 4/5 Pro, Mi Box S, Mi Projector 2 and other models.

1. How to determine the type of Xiaomi remote: IR Bluetooth?

Before you try to connect a remote, you need to understand what type of communication you have, and it depends on the whole algorithm of actions. Xiaomi has three main types of remotes:

• 📶 Infrared (IR) — It works through an invisible light signal, requires a line of sight between the remote and the receiver on the TV, and is used in most Mi models. TV (Like Mi. TV 4A, Mi TV 4S).
• 🔵 Bluetooth - wirelessly connected, does not require line of sight, more commonly found in consoles (Mi Box S, Mi) TV Stick and Projectors (Mi Smart Projector 2).
• 🔄 Hybrid (IR + Bluetooth, which combines both types. TV Q1 can work on IR, Bluetooth.

How do you know your type?

• 🔍 Look at the remote box — usually it has a protocol (e.g., “Bluetooth Remote»).
• 📱 Go to the TV settings: Settings → Devices → Remotes and accessories. If you have a "Add Bluetooth remotes," your model supports this type of remote control.
• 💡 Visual check: y IR-The remotes at the top have a little transparent window.

⚠️ Note: If you use the Mi Remote Controller, it only works on Bluetooth. IR lead to error 10-1004.

2. Connection IR-remote TV: standard-of-the-art

Most Xiaomi TVs (Mi series) TV 4A, Mi TV 4S, Mi TV 5) use infrared remotes; their connection does not require complex manipulation, but there are nuances.

Step-by-step:

1. Turn on the TV with the power button on the case (if it is turned off).
2. Point the remote to IR-receiver (usually located at the bottom of the screen, right or left).
3. Press the Menu buttons simultaneously + OK 5-7 seconds until the indicator on the remote starts to blink.
4. Press 1 (to confirm synchronization) The TV must respond with the message "Remote connected".

If the synchronization is not successful:

• 🔋 Check the batteries – even a weak charge can block the signal.
• 📶 Make sure there are no obstacles between the remote and the receiver (glass, mirrors, direct sunlight interfere with the device). IR-signal).
• 🔄 Try restarting the TV: Settings → On TV. → Reboot.

⚠️ Note: On some models (e.g. Mi) TV 4X) After resetting, the remote may require re-synchronization. If the TV doesn't respond to buttons, try clamping the Menu. + Back to 10 seconds.

3. Synchronize Bluetooth remote with Xiaomi (Mi Box, Mi) TV Stick, projectors)

Bluetooth remotes (such as those from the Mi Box S or Mi Smart Projector 2) are connected differently, and it is important that the device is in pairing mode.

Instructions for Mi Box/Mi TV Stick:

1. Turn on the console and go to Settings → Remote and devices → Add an accessory.
2. On the remote, hold back. + Home for 5 seconds until the indicator flashes blue quickly.
3. The name of the remote will appear on the screen (for example, “Xiaomi Remote”) – select it to pair.
4. Wait for the message "Connected." Test the buttons.

For projectors (Mi Smart Projector):

• 🔍 Go to Settings. → Bluetooth devices.
• 🔄 On the remote, pinch the Menu. + OK 3 seconds.
• 📱 In the list, find “Xiaomi Remote” and confirm the connection.

If the remote is not located:

• 🔋 Reset the projector/set-top box.
• 📶 Make sure that the distance between the remote and the device does not exceed 5 meters.
• 🔄 Reset the remote settings: Remove the batteries for 30 seconds, then re-pair the pairing.

4. Problem Solving: The remote does not connect or malfunctions

If the standard methods didn’t work, check out these points:

• 🔋 Batteries: even if they're new, try replacing them with alkaline batteries (like Duracell). Cheap batteries may not provide enough voltage to power the batteries. IR-transmitter.
• 📶 Interference: Others IR-devices (air conditioners, music centers) can block the signal.
• 🔄 Reset TV: if the remote stopped working after the upgrade, reset to factory settings: Settings → On TV. → Reset.
• 🛠️ Hardware malfunctions: If the remote is dropped or wet, check the integrity of the battery housing and contacts.

Common mistakes and their causes:

• 🚫 10-1004 — Trying to connect a Bluetooth remote as IR (vice versa).
• 🚫 Red light flashes 3 times – batteries are discharged or transmitter is damaged.
• 🚫 The remote is connected, but not all buttons work – the firmware settings are lost (you need an update).

💡

If the Mi Box remote stopped working after connecting the headphones over Bluetooth, try turning off all wireless devices in the settings and reconnect the remote again. Channel conflict is a common cause of failures.

5. How to connect a universal remote to Xiaomi TV

If the original remote is lost or broken, you can use a universal (for example, Xiaomi Universal Remote or remotes from other brands).

1. Make sure that the universal remote supports the Xiaomi protocol (usually specified in the instructions).
2. Enable programming mode on the universal remote (most often the Setup or Code Search button is clamped).
3. Enter the code for Xiaomi. Popular codes: 📺 1183, 1293 - for most Mi TV. 📦 1017, 1125 - for the Mi Box.

Check the buttons. If some don't respond, try another code.

If the universal remote does not find Xiaomi:

• 🔍 Check if he's supporting it. IR-protocol NEC (used by Xiaomi).
• 📱 Update the Universal Remote firmware (if possible).
• 🔄 Use Auto Search mode - the remote will select the appropriate code.

⚠️ Note: Universal remotes often do not support voice input and special buttons (for example, PatchWall or Google Assistant.

6. Alternative ways to manage Xiaomi without remote control

If the remote is broken or lost, and a new one has not yet been purchased, you can control the TV or console in other ways:

• 📱 Mi Remote app (available for Android and iOS): Download the app from Google Play or the App Store. connect your phone and TV to the same Wi-Fi network. Select the device model in the app and follow the instructions.
• 🖱️ USB-Mouse/keyboard: Connect to the port USB It works on a menu, a browser, and most apps.
• 🎮 Gamepad: If you have a Bluetooth-enabled gamepad (like Xiaomi Game Controller), you can use it for navigation.
• 🗣️ Voice Assistant: on models with Google Assistant (e.g. Mi) TV Q1) You can use voice commands through a button on the body.

Important: Mi Remote only works on the same network as the TV. If Wi-Fi is disabled, connect the phone to the access point that the TV itself creates (the network name usually begins with the TV «Xiaomi_»).

💡

The Mi Remote app doesn’t replace the physical remote completely – some features (like turning on the TV) require you to use it. IR or Bluetooth.

7.Where to buy the original remote for Xiaomi and how to verify authenticity

If the remote is broken, you should buy the original one.

• 🛒 Official stores: Mi Store (online or offline). AliExpress (rated sellers) 98%+ and marked "Official Store»). Wildberries/Ozon (Check the reviews and photos of real buyers).
• 🔍 Original signs: "Xiaomi" with the logo on the case, high-quality packaging with a hologram, buttons with a clear engraved (fakes often blurred characters), the package includes instructions in several languages.
• 🚫 Signs of counterfeiting: Too low price (original costs 800 to 1500 rubles) No logo on the battery compartment. buttons tight or wobbly.

Average prices for Xiaomi’s original remotes (2026):

Before you buy, check out your TV model — some remotes are visually similar but not compatible. TV 4A Not good for Mi. TV 5 Pros due to different protocols.

FAQ: Frequent questions about connecting Xiaomi remote