How to connect a Xiaomi TV to the receiver: all ways + error solving

Introduction: Why connect the receiver to the Xiaomi TV

Modern Xiaomi TVs (Mi TV 4/5, Redmi Smart TV, Mi TV Q1/Q2) are equipped with built-in Smart-features, but many users still prefer to use external receivers. The reasons vary from the habit of satellite TV to the need to view encoded channels that are not available in streaming services. Connecting the receiver to the TV opens access to hundreds of channels in high quality, including paid packages of operators like Tricolor, NTV-Plus or local cable providers.

But the connection process is not always intuitive. Users have problems: there is no image when connecting through the Internet. HDMI, The sound is only going through the receiver speakers, or the TV doesn't recognize the signal. In this article, we'll look at all the current ways of connecting. HDMI obsolete RCA/SCART), We'll adjust the sound and the picture, and we'll solve common errors. TV Google TV, where the setting algorithm differs from standard TVs.

If you’ve just bought a receiver or upgraded your TV to a new Xiaomi model, this guide will help you avoid common mistakes and save time on finding solutions.

How to connect the receiver to the Xiaomi TV

The choice of method depends on the available connectors on both devices, and modern receivers and TVs Xiaomi (released after 2018) support the following interfaces:

• 🔌 HDMI The best option for video transmission in resolution before 4K Multi-channel sound (Dolby Digital) DTSSuitable for all Mi models TV Redmi Smart TV.
• 📺 RCA ("tulips") is an outdated analog standard for televisions without HDMI (current for receivers over 10 years old).
• 🔗 SCART is a European standard, rarely found in newer devices, but may be required to connect to older receivers.
• 📡 Antenna input (RF-IN) – used to transmit a signal from the receiver to the TV via coaxial cable (relevant to DVB-T2 consoles).

Below is a comparative table of methods with the supported permissions and features:

Important: Xiaomi TVs with Google TV (e.g. Mi TV Q2 2023) can automatically determine the type of connected device through HDMI and offer optimal settings. In manual mode, this is done through Settings → Devices → HDMI- chain.

Connecting via HDMI: step-by-step instructions

This is the most common and reliable way to connect.

• 📺 Xiaomi TV with a free port HDMI (usually 2–3).
• 📡 Receiver with output HDMI OUT.
• 🔌 Cable HDMI 2.0 or later (for 4K is mandatory HDMI 2.1).

Sequence of action:

1. Turn both devices off the socket (this will prevent failures on the first connection).
2. Connect the HDMI cable to the OUT port on the receiver and any free HDMI-IN on the TV. For Xiaomi port-labeled models (such as HDMI 1 (ARC), choose any other than ARC, unless you plan to connect the sound system.
3. Turn on the receiver, then turn on the TV.
4. On the Xiaomi remote, click the Source (or Input) button and select the appropriate one. HDMI-port.

The cable is tightly inserted into both connectors|

The TV and receiver are included in the same outlet (preferably via a network filter)|

The receiver selects the correct signal source (e.g., "HDMI OUT")|

The correct entrance is selected on the TV (HDMI1/HDMI2)-->

If the image does not appear:

• 🔄 Restart both devices (pull the plugs out of the socket for 30 seconds).
• 🔧 On the receiver, check the signal output settings: go to the Menu → Video settings → Resolution and select 1080p or Auto.
• 📺 On Xiaomi TV, update the firmware: Settings → About TV → System Update.

💡

If after connecting the sound is only through the receiver speakers, on the Xiaomi remote, press the Settings button → select Sound → HDMI Output → turn on the Passthrough option (direct output).

Connection via RCA ("tulips") or SCART

These methods are relevant for older receivers or TVs without HDMI, for example, if you have a GS 8300 receiver (released in 2010) or a Xiaomi Mi TV 3S (2016, without HDMI-ARC).

• 🔴🔵🟢 Cable RCA-RCA (3 plugs for video and audio).
• 🔌 Or the adapter SCART-RCA if the receiver is only SCART.

Instructions for RCA:

1. Connect the yellow plug (video) to the VIDEO OUT port on the receiver and AV IN on the TV.
2. White and red (audio) connect to AUDIO L/R OUT on the receiver and AUDIO IN on the TV.
3. On the Xiaomi remote, click Source → select AV or Composite.

For SCART:

1. Connect the SCART-RCA cable to the receiver.
2. The other end (RCA) is inserted into the corresponding connectors on the TV.
3. In the receiver menu, select the output mode RGB or CVBS (depending on the model).

⚠️ Note: When connecting through RCA or SCART maximum resolution will be 576i for PALor 480i for NTSCFor viewing. HD-This method is not suitable for the channels - it will be necessary HDMI.

The Setting of the Sound: Why It's Not There or It's Going Wrong

One of the most common problems after connecting the receiver to the Xiaomi TV is the lack of sound or its output through the receiver speakers instead of the TV.

For Xiaomi models with Google TV (e.g. Mi TV Q2 75'), the audio setting path is different:

1. Open the settings (cog on the remote).
2. Go to the → Sound output devices.
3. Select HDMI-ARK or Digital Output (SPDIF) if you use an optical cable.

Solving Typical Errors When Connecting

Even with the right connection, there can be failures. Let's take a look at the most common ones.

• 🖼️ No image, but sound is Cause: Incompatible resolution or refresh rate. Solution: Set 1080p @50Hz on the receiver (for Europe) or 1080p @60Hz (for the United States/Asia).
• 🔄 Image flashes or tears Reason: Bad HDMI- cable or interference Solution: Replace the cable with a High Speed certified HDMI or use a ferrite filter.
• 📵 The TV doesn't see the receiver Reason: There's no signal from the receiver Solution: Check if the receiver is plugged in and if the right source of the signal is selected (e.g., Satellite for satellite consoles).

For Xiaomi models with Android TV 9.0 and higher (for example, Mi TV 4A), when you have problems with HDMI, resetting the port settings will help:

1. Go to Settings → Devices → HDMI-chain.
2. Select a problem port (e.g. HDMI 2).
3. Press Reset or Forget the Device.
4. Turn off and reconnect the cable.

⚠️ Warning: If after connecting the receiver, the Xiaomi TV starts spontaneously switching signal sources, turn off the CEC function (control over HDMI) in the Settings menu → Devices → HDMI-chain → Control HDMI. This will solve the problem of random switching.

Additional settings for satellite receivers

If you connect a satellite receiver (such as the Tricolor GS B531 or NTV-PLUS GI S2361), you will need to adjust the satellite parameters after the physical connection.

1. Go to the menu at the receiver → Installation → Search for channels.
2. Choose the search type: manual (if you know the parameters of the transponder) or automatic.
3. For manual search, specify: Satellite: e.g. Eutelsat 36E (for Tricolor), Frequency: 12226 MHz (for the Unified Package), Flow speed: 27500, Polarization: Left (L) or Right (R).

Save the channels found and restart the receiver.

For Xiaomi TVs with Google TV, you can integrate satellite channels into the general list:

1. Open Settings → Channels → Channels Configure.
2. Select Add Source → External Device (HDMI).
3. Follow the instructions on the screen for scanning.

💡

If after setting up satellite channels, some of them do not show (black screen or "Scrabble"), check if your smart card is activated. Go to the menu on the receiver → Information → Card status.

FAQ: Frequent questions about connecting the receiver to Xiaomi TV