How to connect the remote from Rostelecom to the Xiaomi TV: 3 working ways

Connecting the remote from Rostelecom to the Xiaomi TV is a challenge that many interactive TV subscribers face. Although the remote and TV manufacturers are different, synchronization is possible thanks to universal control protocols. In this article, you will find step-by-step instructions for all Mi TV and Redmi Smart TV models, including solutions to typical problems from lack of response to a signal to resetting the remote.

It is important to understand that Rostelecom supplies two types of remotes: infrared (IR) radiofrequency (RF). The first one works by direct contact with the TV (you need to point the remote to the receiver), the second one by radio (you can control it from another room), the methods of connection for them are different, so first determine the type of your remote control. RF 2.4G or Bluetooth is a radio frequency model, and the absence of such labels usually means IR-remote.

We tested the instructions on Xiaomi Mi TV 4S 55, Redmi Smart TV X55 and Mi TV Q1 75 with remotes Rostelecom release 2022-2026. All methods are relevant for firmware MIUI TV 3.0 and later. If your model is older, you may need a preliminary update system — read about this in the appropriate section.

1. Definition of the type of remote by Rostelecom

Before you connect, you need to identify the remote model precisely, and that affects how you synchronize and what constraints you might have. IR-remote RF-remote:

• 🔍 Appearance: RF-The remotes usually have a tag. 2.4G or Bluetooth on the back. IR-The remotes of such inscriptions do not contain.
• 📶 Range: If the remote works through walls or at a distance of more than 10 meters, this is the case. RF. IR Requires direct visibility and a maximum of 8 meters.
• 💡 Indicator: When pressing buttons on RF-The remotes often flash blue/green LED. IR-The remotes usually do not have a visible indication.
• 📦 Complementation: RF-remote USB-receiver (dongle) for connecting to the TV. IR-The remotes don't require such a dongle.

If you use the Rostelecom model remote STB-104 or STB-105, It's probably IR-The device. STB-201 newer RF-You can specify the model on the sticker under the lid of the battery compartment.

⚠️ Note: Rostelecom remotes with Bluetooth support (for example, STB-300) not compatible with Xiaomi TVs older than 2020, they require a separate adapter, which is issued in the offices of the operator.

2. Connecting the IR-pool by Rostelecom to Xiaomi TV

Infrared remotes are the easiest to connect to, as they don’t require additional drivers or adapters, and the main condition is that the TV must support learning remotes (Learning Remote), an option available on all Mi TVs and Redmi Smart TVs with MIUI TV 2.0+ firmware.

Follow the instructions:

1. Turn on the TV and go to Settings → Devices and accessories → Remote DU → Add remote.
2. Select the option Learning (Learning).
3. A list of buttons will appear on the screen (for example, On/Off, Volume).+, OK). Go ahead. IR-remote control of the Rostelecom on the TV receiver (usually located at the bottom of the screen) at a distance of 3-5 cm.
4. Press and hold the button on the remote that you want to program (for example, on / off). The TV must confirm successful training with a flashing screen or an audible signal.
5. Repeat step 4 for all required buttons. Minimum set: On/Off, OK, Back, Volume+/-, Channels+/-.

If the TV is not responding to the training, check:

• 🔋 Battery charge in the remote (replace with new ones).
• 📺 Cleanliness IR-receiver on the TV (wipe with a dry napkin).
• 🔄 Distance between remotes (should not be more than 10 cm during training).

Make sure the TV is on the network|Check the battery charge in the remote|Clean up IR-TV-reader|Place the remote at a distance of 3-5 cm from the receiver|Prepare a list of buttons for programming-->

3. Connection of RF-pool Rostelecom (2.4G) to Xiaomi TV

Radio frequency remotes Rostelecom require connection USB-The dongle comes with a complete set of dongle, which is not synchronized without it, and if the dongle is lost, you can buy it from the operator's office or order it from AliExpress (see the remote model, for example, STB-201 2.4G Dongle).

Instructions for connection:

1. Put it in. USB-Dongle to any free port on the TV. USB 2.0 (usually black).
2. Turn on the TV and wait for the device to be automatically detected. A notification Discovered new remote should appear on the screen.
3. If the automatic connection does not work, go to Settings. → Devices and accessories → DU remote → Add RF-remote.
4. Press and hold the OK + On/Off buttons on the Rostelecom remote for 5 seconds until the LED blinks.
5. The TV needs to confirm the synchronization with the message "Remote connected." If that doesn't happen, repeat step 4.

RF-Rostelecom remotes can conflict with other wireless devices (mice, keyboards, game controllers). If the remote is unstable after connecting, turn off the rest of the consoles. USB-TV devices and reboot them.

💡

If the TV can't see RF-Remote, try connecting the dongle through USB-It's an externally powered hub, and sometimes the ports on the TV don't provide enough current to run the receiver.

4.Setting up the remote buttons by Rostelecom for Xiaomi TV

Even after a successful connection, some buttons may not work correctly, for example, the Guide button on the Rostelecom remote defaults to the operator menu, not the Mi TV. To reassign functions, use the built-in button editor:

1. Go to Settings → Devices and accessories → Remote DU → Customization of buttons.
2. Select the button you want to reassign (e.g., the guide).
3. In the action list, select the desired function (for example, Open Mi Home or Launch Netflix).
4. Save the changes and check the button.

If you don't have the right function in the list, you can create a macro, a sequence of commands, for example, so that you can turn on the TV and start YouTube with one button:

1. In the button settings menu, select Create a macro.
2. Add the action: On/off → Launch YouTube.
3. Assign a macro to any free button (such as FAV).

⚠️ Warning: Reassigning the On/Off buttons, Volume and Channels may conflict with the original Xiaomi remote. If the TV stops responding to the native remote, reset the settings to Settings → Devices → Resetting the remote.

5. Solving Connection Problems

If the remote does not connect to Xiaomi TV, check the following points:

• 🔌 Power TV: Make sure the TV is on and not in Power Saving mode (in this case) USB-ports may be disabled).
• 📡 Interference: Disable other wireless devices (routers, microphones, wireless headphones) that can interfere at 2.4 GHz.
• 🔄 Firmware: Update your TV to the latest version. Go to Settings for this. → On TV. → Updating the system.
• 🛠️ Hardware malfunctions: If the remote has fallen or got wet, check its performance on another device (for example, on the console Rostelecom).

If the problem persists, try alternative ways to connect:

• 📱 Through the app: Install the Mi Remote Controller app on your smartphone (available for Android and iOS). IR-remote and can temporarily replace the physical remote with Rostelecom.
• 🖥️ Through HDMI-CEC: If the TV is connected to the prefix Rostelecom through HDMI, turn on HDMI-CEC It's in the TV settings, so you can control the TV from the console.

Tests can be used to diagnose hardware problems IR-signal:

1. Open your smartphone camera and point the IR-remote Rostelecom.
2. Press any button. If the remote is working, you'll see a purple flicker on your smartphone screen (IR-The signal is not visible to the eye, but is recorded by the camera).
3. The lack of flicker means a malfunction of the remote.

💡

If the TV does not respond to RF-remote, but USB-Dongle is defined in the system (see Settings) → Devices, the problem is probably the firmware of the dongle. Update it through the official software Rostelecom or contact the operator.

6. Update TV firmware for compatibility

If your Xiaomi TV is released before 2021, it may not support Rostelecom's new remote protocols, and an update will help.

Method 1: Through the Internet

1. Connect the TV to Wi-Fi or Ethernet.
2. Go to Settings → About TV → System Update → Check for updates.
3. If a new version is available, click Download and Install.
4. Wait until the process is complete (the TV will restart automatically).

Method 2: Through USB-accumulator

If the TV is not connected to the Internet or the update over the network does not work:

1. Download the latest firmware for your model from the official Xiaomi website (Support → Mi TV section).
2. Unpack the archive and copy the update.zip file to a flash drive formatted in FAT32.
3. Put the flash drive in. USB-television-port.
4. Go to Settings → About TV → System Update → Update via USB and select a file.

After the update, check the compatibility of the remote again. If the problem persists, you may need to roll back the firmware to a more stable version.

1. Download the desired version of the software from the 4PDA forum (section Xiaomi Mi TV).
2. Repeat the steps from Method 2, but select System Restore instead of Update.

7. Alternative ways to control the TV

If Rostelecom failed to connect the remote, consider alternative options:

• 📱 Mobile app: Mi Remote (for Android) or Xiaomi TV Remote (for iOS) lets you control your TV over Wi-Fi or Bluetooth.
• 🎮 Gaming Controller: Connect via Bluetooth a gamepad (such as Xiaomi Game Controller) and use it to navigate the menu.
• 🖱️ Mouse and keyboard: Any wireless mouse or keyboard with support USB/Bluetooth It can replace the remote. Connect it through the device settings and accessories.
• 🔄 Universal remote: Buy a remote with support for Xiaomi TV (For example, Xiaomi Mi TV Remote or One For All. It can be programmed to control all the devices in the home.

If you use the console Rostelecom, the most convenient option is to control through HDMI-CEC:

1. Connect the set-top box to the TV via HDMI.
2. In the TV settings, turn on HDMI-CEC (Settings → Devices and Accessories → HDMI-CEC).
3. Now the console will control the TV (on, volume, switching inputs).

FAQ: Frequent questions