How to connect the remote Mi TV to the TV Xiaomi: 5 proven ways

Connecting the Mi TV to a Xiaomi TV seems like a simple task, but in practice users face a lot of nuances: from lack of reaction to buttons to synchronization errors. Especially relevant problem for owners of new models Mi TV Q2/Q1E or Redmi Smart TV, where the manufacturer periodically updates the pairing protocols. In this article, we will analyze all the current ways of connection – from standard synchronization via Bluetooth to manual code entry, and also tell how to restore communication if the remote stopped working after a software update.

It’s important to understand that the connection algorithm may vary depending on the TV model and the remote version (e.g. Mi TV Stick Remote or classic Mi Remote Controller).We tested the instructions on the 2020-2026 devices and identified universal steps that will work in 90% of cases. If your remote is not automatically determined, do not rush to buy a new one: most often the problem is solved by resetting or updating the firmware.

1. Standard Bluetooth Connection: A Step-by-Step Algorithm

Most Mi TV remotes use Bluetooth Low Energy (BLE) to communicate with the TV, and this method works on all models starting with the Mi TV 4A (2018) and later, the main condition is that the remote must be paired with the TV in the factory beforehand (this is evident from the reaction to the power button on the first turn on).

1. Turn on the TV with a button on the case (usually it is located on the side or bottom under the Mi logo).

2 Press and hold the Menu + OK buttons on the remote simultaneously for 5-7 seconds until the indicator flashes twice.

3. The “Device Search...” notification will appear on the TV screen. If it is not available, go to Settings → Devices → Bluetooth and start the search manually.

4. Select "Mi Remote Controller" (or the name of your remote model) from the list and confirm pairing.

• ✅ For models from 2023 to 2026 (e.g. Xiaomi) TV A Pro: After holding the buttons, the remote will emit an audible signal, and will appear on the screen QR-proof-code.
• ⚠️ For older models (Mi) TV 3S, Mi TV 4): entry may be required PIN-code 0000 or 1234.
• 🔄 If the remote is not located, remove and insert the batteries, then repeat the procedure.

Check battery charge (voltage should be ≥ 2.8V) | Make sure TV distance ≤ 1 meter | Turn off other Bluetooth devices nearby |Reboot the TV before pairing-->

Once you’ve successfully connected, check all buttons. If some features (like Google Assistant or volume control) don’t work, update your TV firmware via Settings → About TV → System Update. On Android TV 11+ models (like Mi TV Q2 2023) you may need to re-connect all accessories after upgrading to version 3.0.12+.

2. Connection via IR port: for remotes without Bluetooth

Some low-end remotes (such as the Mi Remote Lite or the 2020 Redmi Smart TV) use an infrared port (IR) instead of Bluetooth.

1. Make sure there are no obstacles between the remote and the TV (maximum distance - 5 meters, viewing angle - 30 °).

Press and hold the Menu + Volume+ button for 10 seconds until the indicator lights up red.

3. Enter the TV model code (see table below). If the code is unknown, use universal 001 for Xiaomi or 004 for Redmi TV.

If the code doesn't fit, try the alternatives on the list. On models with a hybrid remote (IR + Bluetooth), first pair with Bluetooth, and then configure the IR commands through the Settings menu → Remote → IR Code Configure.

💡

If the remote does not respond to the code input, try resetting it: remove the batteries, press and hold any button for 15 seconds, then insert the batteries back and repeat the procedure.

3. Manual pairing through the TV menu

If the automatic connection does not work, use manual mode. This method is relevant for TVs on Android TV 9.0+ (for example, Mi TV Q1E or Xiaomi TV P1):

1. Go to Settings → Devices → Bluetooth and remotes.

2. Select "Add Accessory" → "Remote control".

3.Push "Start Search" and hold the Home button on the remote for 3 seconds until the indicator starts flashing blue.

4. A list of found devices will appear on the screen. Select your remote (the name will contain "RC-" or "Mi Remote").

5. Confirm the pairing on the TV and remote (some models will need to press OK on the remote).

If the remote is not displayed in the list:

• 🔋 Check the battery charge (use new alkaline batteries) AAA).
• 📶 Make sure the TV is not in Do Not Disturb mode (turns off Bluetooth).
• 🔄 Restart the TV through the Settings menu → The device → Reboot.

Bluetooth remote (without IR)|IC remote (without Bluetooth)| Hybrid (Bluetooth + IR)|I don't know what remote control I have-->

On PatchWall models, the path to remote settings may be different: Settings → Remote & Accessories → Add Remote. After pairing, check the Google Assistant and Prime Video buttons – they often require additional customization in the App menu.

4. Problem Solving: The remote does not connect or does not work correctly

If the Mi TV remote does not respond to pressing or connects with errors, use this troubleshooting instruction:

⚠️ Attention: On Xiaomi TVs with firmware MIUI TV 3.0+ (released after October 2023) may block third-party remotes. To unlock this feature, go to Settings → For developers → Allow connection of non-certified devices.

Frequent errors and ways to correct them:

• 🚫 The remote does not turn on the TV: check if the display on the remote is lit when you press the buttons. If not, replace the batteries or clean the contacts with alcohol. TV Q2 The power button may not work if the TV is completely off the outlet.
• 🔄 Remote connects, but the buttons work incorrectly: reset the remote settings through Settings → remote → Reset to factory. Repeat the IR for the IR remotes.
• 📵 The TV can't find the remote: turn off the TV for 10 minutes (take the plug out of the socket), then repeat the pairing. This will reset the cache of the Bluetooth module.
• 🔊 Media buttons don’t work (Netflix, Prime Video): Update apps via Google Play or reinstall them.

To diagnose the problem, connect the remote to another device (for example, a Xiaomi smartphone via the Mi Remote app). If the remote is not detected and there is a problem in the remote itself (possibly damaged Bluetooth module), in which case, contact the service center or buy a new remote (original models: MDZ-26-AA for Mi TV Q2, MDZ-22-AB for Redmi TV).

5. Set up the remote to control other devices

Mi TV remotes (especially Mi Remote Controller 2 and later) can control not only the TV, but also other devices: air conditioners, audio systems or even Xiaomi Box.

1. Go to Settings → Remote → Control of other devices.

2. Select the type of device (e.g., "Air Conditioning" or "Soundbar").

3. Follow the on-screen instructions to set up IR commands. For popular brands (e.g. Gree, Samsung), the codes are already uploaded to the TV database.

4. Check the work by pointing the remote to the device. If the command does not work, try another code from the list.

To control Xiaomi Mi Box S or Mi TV Stick:

1. Connect the set-top box to the TV via HDMI.
2. In the remote menu, select "Configurement".
3. Follow the instructions on the screen to sync (code 1234 may be required).

On Mi TV ES 2022 and later, the Smart Home feature is available – the remote can control Xiaomi Smart Home devices (for example, Yeelight lamps or a robot vacuum cleaner) through the Mi Home application.

1. Install the Mi Home app on the TV.
2. Sign in to one Xiaomi account on TV and in the app.
3. Add devices to Settings → Smart home.

💡

Mi TV remotes with Bluetooth 5.0 support (Models 2022+) can control up to 5 devices at a time, including a TV, set-top box and audio system.

6. Update of the remote firmware: when necessary

If the remote is unstable (for example, pressing delays or some buttons do not work), the cause may be outdated firmware, which can be updated in two ways:

Method 1: Through the TV menu (for 2021+ models)

1. Go to Settings → Devices → Bluetooth and remotes.
2. Select your remote from the list of connected devices.
3. Click on "Update the firmware" (if the option is active).
4. Wait until the process is complete (don’t turn off the TV!).

Method 2: Through the Mi Home app (for OTA-enabled remotes)

1. Connect the remote to the TV.
2. Open the Mi Home app on your smartphone.
3. Go to the "Devices" section" → Find your TV.
4. Select "Update the Firmware Accessories".

After updating the firmware remote may require re-pairing. on models Xiaomi TV A Pro 2023 after upgrading to version 1.4.5+, gesture support (for example, shaking the remote to switch channels).

⚠️ Warning: Do not interrupt the process of updating the firmware remote, this may cause it to fail.If the update hung during the Preparation stage for more than 10 minutes, remove the batteries from the remote, wait 30 seconds and repeat the procedure.

7. Alternative ways to control the TV

If the original remote is lost or broken, you can control the Xiaomi TV in alternative ways:

• 📱 Mi Remote: Download the official Android or iOS app. It supports Wi-Fi control (for Android models) TV) or IR port (for smartphones with built-in IR blaster, for example, Xiaomi Redmi Note 11).

To control via smartphone:

1. Connect your TV and smartphone to the same Wi-Fi network.
2. Open the Mi Remote app and select “Television” → “Xiaomi” → your TV model.
3. Follow the instructions on the screen for pairing.

If the TV doesn’t respond to the app, check:

• 🔌 Connect to a single network (do not use guest networks or VPN).
• 🔄 Firewall settings on the router (ports 5555 and 8008 must be open).
• 📱 App version (upgrade to the latest in Google Play or App Store).

FAQ: Frequent questions about connecting the Mi TV remote