Connecting the remote to the Xiaomi TV: a complete guide with codes and tips

Why the remote from Rostelecom does not work with Xiaomi TV And what to do about it.

You just connected interactive TV from Rostelecom to your Xiaomi Mi TV, But we've got a problem: does the remote from the provider refuse to control the TV? This situation is familiar to many users - despite the versatility of modern remotes, their compatibility with Xiaomi TVs (especially Mi models). TV 4S, Mi TV Q1/Q2 or Redmi Smart TV) The reason is due to different infrared control protocols and the lack of pre-programmed codes for Chinese brands in the database of Russian providers.

In this article, we will discuss all possible ways of connecting, from automatic code search to manual combinations, and also tell you what to do if the remote does not work. TV best compatible with Rostelecom remotes, how to get around typical errors (for example, ERROR: No Code on the remote screen, and even how to use alternative control methods if standard synchronization failed, for convenience, we collected current codes for popular models and added interactive widgets to help you not miss important steps.

Before you start setting up, make sure that:

• 🔋 The remote control of Rostelecom is serviceable (check the batteries and work with another device, for example, the console).
• 📺 Xiaomi TV is on and on standby (indicator on or blinking).
• 📶 There are no obstacles between the remote and TV (maximum distance is 5-7 meters).

If everything is fine, move on to the next section.

Method 1: Automatic code search for Xiaomi TV

The simplest method is to get the remote to pick up the compatible code on its own, which works 60 to 70 percent of the time, but can take up to 5 to 10 minutes.

1. Turn on the Xiaomi TV and point the remote from Rostelecom to it.
2. Press the buttons at the same time. TV (or STB, if it's not there, and OK 3-5 seconds until the indicator on the remote does not flash twice.
3. Press the button. TV The indicator should flash once (this is a signal to switch to programming mode).
4. Enter 991 (Universal Code to run Auto Search).
5. Point the remote to the TV and press the button. CH+ (switching channels upwards) at intervals of 1-2 seconds until the TV is turned off.
6. As soon as the TV reacts (turns off or switches the source), press immediately. OK, preserve the code.

If the TV does not respond after 100-150 taps CH+, So the automatic search didn't work, so in this case, you can go to manual code entry (next section).

⚠️ Note: On some models of Rostelecom remotes (for example, RT-KP501U or RT-KP740) To activate programming mode instead of 991, you may need to enter 992 or 993. Try all three options if the first one fails.

Method 2: Manual programming using codes for Xiaomi

If the automatic search didn’t work, try entering the code manually. Below is a table with the current codes for popular Xiaomi models. TV. These combinations were tested on the remotes of the Rostelecom series RT-KP5xx and RT-KP7xx (2020–2026 issue).

Instructions for manual code entry:

1. Turn on the TV and point the remote at it.
2. Press TV + OK until the indicator flashes twice.
3. Enter the first code from the table (e.g., 0178 for the Mi TV 4S).
4. Press. OK — The indicator should flash twice (successful preservation).
5. Check the buttons on/off, Volume and Channels.

If the code does not fit, repeat the procedure with other combinations from the table.

If none of the codes worked, try alternative combinations:

• 🔢 Universal codes: 0000, 0001, 0009 (sometimes working with Chinese TVs).
• 🔢 Sony Bravia codes: 0012, 0021 (some Xiaomi models recognize them).
• 🔢 Codes for LG: 0004, 0005 (rarely but helpful).

💡

If the Rostelecom remote controls the TV, but not all buttons work (for example, do not switch channels), try to enter the code again - sometimes "partial" synchronization works, and the second time the remote firmware loads a full set of commands.

Method 3: Customize via Xiaomi TV menu (for new models)

Xiaomi TVs on the base MIUI TV 3.0 and later (released after 2022) support the "Training remote" function, which allows you to program the remote control of Rostelecom directly through the TV interface, without manually entering codes:

1. Open the settings on the TV (button with a gear on the native Xiaomi remote).

Important: This method only works on TVs with an infrared receiver. Make sure that the front panel of your Xiaomi is on the screen. TV There's a little window for receiving a signal from the remote, if you don't have one (like some Mi models). TV ES), This way won't work.

Advantages of the method:

• ✅ No need to search for codes manually – the TV itself “learns” commands.
• ✅ All remote buttons are supported (unlike manual code entry).
• ✅ It works even with non-standard remotes (for example, from Rostelecom consoles with advanced functions).

⚠️ Attention: If after training, the remote controls the TV, but with a delay of 1-2 seconds, this is normal - this is how the Xiaomi protocol with third-party remotes works. To speed up the response, reduce the distance to the TV or point the remote strictly perpendicular to the IR receiver.

What to do if the remote control Rostelecom and did not work

If none of these methods worked, don’t despair – there are several alternative solutions:

Option 1: Use the Xiaomi remote as a universal

Modern Xiaomi remotes (for example, Mi Remote Controller or Redmi Smart Remote) support console management, including equipment from Rostelecom.

1. Open the Mi Remote app on your smartphone (available for Android and iOS).
2. Select Add the device → Prefix. → rostelecom.
3. Follow the instructions on the screen for synchronization.

After that, you can control both the TV (native remote) and the console (via a smartphone).

Option 2: Connect the Bluetooth remote

Xiaomi TVs on Android TV (Like Mi. TV Q1E or Mi TV P1) Supports Bluetooth remotes, including:

• 🎮 Xiaomi Mi Game Controller (can be used as a universal remote control).
• 🖱️ Wireless touchpad keyboards (e.g. Logitech) K400).
• 📱 Remotes from other devices (such as Nvidia Shield or Fire) TV Stick).

To connect, go to Settings → Devices and accessories → Add a Bluetooth device and select the remote from the list.

Option 3: Management through the Rostelecom app

If you have an interactive TV from Rostelecom, you can control the TV through the official Rostelecom TV app (available for Android and iOS).

• 📺 Channel switching and volume control.
• 🔍 Search by programme.
• 📱 Virtual remote with touch buttons.

The disadvantage of this method is the need to keep the smartphone on hand, but it works even without a physical remote.

Common Mistakes and How to Avoid Them

When connecting the remote Rostelecom to Xiaomi TV And so users often have the same problems, and we've collected the most common errors and the ways to solve them:

Another common problem is remote conflict, and if you have a native Xiaomi remote and a Rostelecom remote, their teams may overlap, leading to random positives.

• 🔄 Use the remotes alternately (do not press the buttons on both at the same time).
• 📴 Turn off the function. HDMI-CEC in the settings of the TV (it can duplicate commands).
• 🔋 Remove the batteries from the unused remote control.

💡

If Xiaomi TV does not respond to the remote of Rostelecom even after several attempts, check if the IR receiver is turned off in the settings. → Devices and accessories → Remote and make sure that the Infrared port option is enabled.

How to check the compatibility of your Xiaomi model TV Rostelecom-based

Not all Xiaomi TVs work equally well with remotes of Russian providers.

• 📅 TV release years (newer models more often support universal protocols).
• 🔧 Firmware versions (updates) MIUI TV They can add or remove support for codes).
• 📡 Type of IR receiver (some budget models, for example Redmi Smart) TV A, have a simplified module).

To find out if your model is compatible, follow the following steps:

1. Check the TV model: Click on your native remote Settings → Or look at the sticker on the back (like Mi). TV 4S 55 T2).
2. Check the official compatibility list: 🔹 Full compatibility: Mi TV Q1/Q2, Mi TV 4S (2020–2023), Mi TV P1. 🔹 Partial compatibility: Redmi Smart TV X, Mi TV A2 (Some buttons may not work). 🔹 Problem models: Mi TV ES (No IR receiver, Mi TV 4A (archetypal).

• Go to Settings → About TV → System Update.
• If an update is available, install it (sometimes new code support is added).

If your model is on the list of "problems," consider alternative management methods (see previous section). TV ES The only option is to use Bluetooth remotes or Mi Remote app.

FAQ: Frequent questions about connecting the remote Rostelecom to Xiaomi TV