Connecting antenna to Xiaomi TV: full instruction with photos and tips

Connecting an antenna to a Xiaomi TV is a challenge that every owner faces after buying a device. Despite its apparent simplicity, the process has nuances, from choosing the right cable to configuring digital channels in the menu. MIUI TV. In this article, we will analyze all ways of connecting - an air antenna for DVB-T2, cable-TV DVB-C, And even a satellite dish, if your model supports it. DVB-S2.

We will pay special attention to typical errors: why the TV does not find channels, how to avoid interference with a weak signal, and what to do if after connecting the image “splits” into squares. TV A Series to the flagship Mi TV Q2 75".

If you've never set up a TV signal before, don't worry: we've broken it down into simple steps with illustrations of the interface, and for experienced users, we've prepared advanced tips, like how to manually add missing channels or optimize reception for remote repeaters.

1.What antennas are compatible with Xiaomi TVs

Xiaomi TVs support three types of antennas, but their compatibility depends on the model and year of release.

• 📶 Etheric antennas (DVB-T2) — It is suitable for all models, starting with the Mi. TV 4A (2018) Requires a digital tuner that is built into 99% of Xiaomi devices. OEM-versions for foreign markets.
• 📺 Cable antennas (DVB-C) — They only work on models with support DVB-C (Like Mi. TV 5 Pro or Redmi Smart TV Check the specifications of your model in the documentation.
• 🛰️ Satellite antennas (DVB-S2) — It is rarely supported, only in top models (for example, Mi). TV Q1E). Require an additional receiver if there is no built-in TV CI+ slot.

To find out exactly what type of antenna your TV supports, go to the Settings menu. → Channels → Type of antenna, if there's a point. DVB-C or DVB-S2, So it's compatible, and you can find it on the box or in the specifications on Mi.com.

⚠️ Note: Xiaomi TVs for the Chinese market (models with a prefix) CN The name of the project often does not support European standards. DVB-T2. Before buying, specify the region of the device!

If your model doesn't support the right type of antenna, you'll get an external receiver (like the Xiaomi Mi Box S with a tuner) or a console from a provider. But that will add extra wires and a remote, so keep that in mind when you choose.

2.Preparation for connection: what will be needed

Before you connect the antenna, prepare everything you need.

• 📡 The antenna is indoor or outdoor, depending on the signal level in your area.
• 🔌 Cable is a coaxial cable with a 75 Ohm wave resistance and an F connector, no more than 15 meters long (long cables degrade the signal).
• ⚡ Signal amplifier (optional) – you need to use a passive antenna if you live far from the repeater.
• 🔧 Tools: screwdriver (for attaching the antenna), cutters (for cutting the cable), F-connectors (if they are not on the cable).

Critical: Xiaomi TVs use a standard connector IEC 61169-2 (He's aka "daddy" or RF IN). If your cable has a different connector (like the Belling-Lee for old antennas), you'll need an adapter. 50–150 ruble.

Also check the integrity of the cable: if the wisp is damaged or the central vein is bent, the signal will be lost, especially for outdoor antennas where the cable is exposed to weather, replace it with a new double-screen one if necessary. SAT 50 or SAT 703).

Check the antenna type (DVB-T2/DVB-C/DVB-S2) TV-setting|

Buy a cable with a connector IEC 61169-2 (adapter)|

Make sure the cable length is less than 15 meters.|

Prepare tools for installation (if the antenna is outdoor)|

Check the signal strength in your region on the map of the RTRS-->

3. Step-by-step instruction: how to connect an antenna to Xiaomi TV

Now, to the connection itself, the instructions are universal for all models, but there may be minor differences in the menu.

Step 1: Physically Connecting the Cable

1. Turn off the TV from the outlet (this is mandatory for safety).

2. Find a connector on the back. ANT IN (or RF IN) — It is usually located near the ports. HDMI white-coloured.

3. Carefully insert the F-connector into the socket to the point. Don't put too much effort into the socket so as not to damage the contacts.

4 If you use a signal amplifier, connect it to the cable in front of the TV (closer to the antenna). Power the amplifier only after full installation.

Step 2: Selecting a signal source

1. Turn on the TV and press the Source (or Input) button on the remote.

2. In the source list, select TV (or Antena, DTV — name depends on the model).

3. If the TV requests the type of antenna, specify the correct one (DVB-T2 TV-TV, DVB-C cable-wise).

Step 3: Automatic Channel Search

1. Go to Settings. → Channels → Auto-tuning.

2.Select a country – for Russia, it is Russia (DVB-T2), for Ukraine - Ukraine (DVB-T2), etc.

3. Run a search. It'll take 3-10 minutes. Don't interrupt it or switch the signal sources!

4. Once the TV is complete, the number of channels found will be shown, and if there are fewer than 20 (for Russia), then there are problems with the signal - go to the Troubleshooting section.

If the automatic search didn’t work, try manual search:

1. In the channel settings menu, select Manual Search.
2. Specify the frequency of the multiplex for your region (for example, 546 MHz for Moscow).
3. Set up the parameters: 🔄 Transfer speed: Auto or 8 Mbps. 📡 Modulation: 256 QAM (for DVB-T2).

Run a search. If you find a channel, save it.

💡

If the TV can't find channels, try turning the antenna toward the nearest repeater. For street antennas, change the angle of inclination by 5-10 degrees and repeat the search.

4.Configure channels after connection

Once you've found the channels, you have to sort them out and customize them.

• 📝 Channel rename: Go to Settings → Channels → Channel management, select a channel and click Rename.This is useful if the names are displayed cryptographically (e.g, MUX-1 instead of Channel One»).
• 🔀 Sort: You can change the order of the channels in the same menu, dragging them to the right positions. Save the changes with a button. OK.
• 🔇 Hiding unnecessary channels: Select the channel and press Hide. This will hide it from the general list, but will not delete it from memory.
• 🔄 Update: If new channels are added (for example, after changing broadcasts), run a second search in Settings → Channels → Update.

For ease of viewing, we recommend grouping channels by topic.

1. News: “Russia 24”, “RBC», «RT».
2. Entertainment: "TNT", "STS", "Yu".
3. Sports: Match TV, KHL.

Xiaomi TVs also have a Favorites feature — add frequently viewed channels for quick access. OK on the remote when the channel is on.

⚠️ Warning: If after sorting channels get lost or lost, don't panic. → Reset → Reset the channel settings and do a second search, which will return everything to factory settings without losing any other data.

5. Troubleshooting: what to do if there is no signal

If the TV does not find channels or the image “crumbles”, use this instruction:

Problem 1: No signal or no service

• 🔌 Check if the cable is tightly inserted into the connector ANT IN. Sometimes contact is broken due to weak attachment.
• 📡 Make sure the antenna is pointing towards the repeater.Use the compass or Antenna Point app for Android.
• 🔋 If you use an amplifier, check the power supply. Some amplifiers have an indicator of operation (LED).
• 🔄 Try another cable - the current one may be damaged.

Problem 2: Canals are found but stutter or freeze

• 📶 Check the signal level in the Settings menu → Channels → Signal status. If it's below 50 percent, you need a more powerful antenna.
• 🔌 Disable other devices that may cause interference (Wi-Fi routers, microwaves, wireless headphones).
• 🔧 If you use a splitter for multiple TVs, replace it with a reinforced model.

Problem 3: Not all channels are found

• 🔍 Run the search manually by specifying multiplex frequencies for your region (see CETV website).
• 📡 Try turning the antenna 10-15 degrees left/right and repeat the search.
• 🔄 Update the TV software: Settings → On TV. → Updating the system.

If nothing works, try connecting the antenna to another TV or receiver. If there's a signal, it's a problem with Xiaomi's settings. If not, look for the reason in the antenna, cable or amplifier.

💡

In 90% of cases, signal problems are solved by checking the cable, directing the antenna, or updating the TV software.

6. Additional tips for improving reception

To get the most stable signal, use these recommendations:

• 📶 For indoor antennas: Place it against a window that faces the repeater. Avoid walls of concrete or metal, which will screen the signal.
• 🏠 For street antennas: Set it as high as possible (e.g. on the roof or balcony) Use a grounded mast to protect against thunderstorms.
• 🔌 For cable TV: If the provider requires binding MAC-address, let him know MAC Your TV (you can find it in the settings) → On TV. → Status).
• 🛠️ For weak signal: Use a level-adjusted amplifier (e.g, TERRA HA123>). Remember, too strong a signal is just as bad as a weak signal!

If you live in a low-cost area, consider alternatives:

• 📡 Satellite TV: Antenna + receiver (e.g., receiver, GS U510) It will allow access to hundreds of channels, but will require a monthly subscription fee.
• 🌐 IPTV: Internet connection (stable Wi-Fi or Ethernet required) Popular services: Wink, MTS TV, Rostelecom TV.
• 📱 Mobile apps: Install TV apps (such as Tricolor TV or Amediateca) via Google Play on your TV.

For owners of Xiaomi Mi TV Android TV There's a bonus: you can install TVHeadend or Kodi to watch TV through streams, which is true if you have a home server or a home server. NAS.

7. Frequent Questions and Answers (FAQ)