The integration of the provider’s hardware with modern smart appliances is often a question for users, especially when it comes to popular brands like Xiaomi. Many Rostelecom console owners are looking to minimize the number of remotes on the table, wanting to control the TV and IPTV on a single device. This is quite real, since modern TVs based on Android TV or MIUI TV have a wide range of command protocols.
There are several basic interaction scenarios, from simple IR learning of buttons to advanced control through HDMI-CEC, which allows the provider’s remote to completely replace the native TV remote. The key here is the right sequence of actions and understanding what type of connection your TV model supports. Not all Xiaomi TVs respond equally to third-party commands, so it is important to consider all options.
In this article, we will explore the technical details of pairing, explore hidden menu functions, and provide algorithms for solving typical signal conflicts. You will learn how to make the volume and power buttons work without unnecessary delay.
Technical requirements and compatibility of equipment
Before you start setting up, you need to make sure your equipment is technically capable of performing synchronization commands. Xiaomi TVs are equipped with infrared receivers (IR ports), which are usually located at the bottom of the screen or on the side. Rostelecom remotes (RT-PM-01 models, RT-PM-02 and new Bluetooth versions) also have the appropriate transmitters. Compatibility depends not only on the presence of infrared ports, but also on the version of the console software.
It is important to understand the difference between IR and Bluetooth. Older remote models operate exclusively over infrared, which requires direct vision between the remote and the TV receiver. Newer devices often support Bluetooth, which allows you to control the console even from around the corner, but to control the TV Xiaomi will still need an IR channel or HDMI-CEC protocol.
Check the integrity of the batteries in the remote, as a weak charge can lead to unstable code transfer during training. Also make sure that the latest system updates are installed on the Xiaomi TV, since older versions of the MIUI TV may have errors in processing external commands.
- 📺 Availability of a serviceable IR receiver at the bottom of the Xiaomi TV.
- 🔋 Fresh batteries in the remote control Rostelecom.
- 🔌 Connecting the TV to the TV through HDMI-cable (preferably version 2.0 and higher).
- 📡 Activation of the function CEC TV menu (for advanced control).
⚠️ Note: If the Rostelecom remote has a "Bluetooth" button or glows with a blue indicator when paired, this does not mean that it can control the TV over Bluetooth. HDMI-CEC.
Preparing Xiaomi TV for synchronization
The first step is to properly configure the Xiaomi TV itself, and you need to activate the mode that allows external devices to control the system, and in most cases, this is HDMI-CEC (Consumer Electronics Control) function, which allows you to transmit commands to turn on, off and control volume over an HDMI cable.
Go to settings on your TV, go to Settings → General → External Devices (the path may vary depending on the version of Android TV or PatchWall).Look for HDMI-CEC or MI Remote Control and make sure the switch is in the On position. Without this step, the console will not be able to "wake up" the TV or adjust its volume.
If you plan to use an IR learning method (where the remote simply copies the button codes), you don't need to set up the TV, just a clean IR receiver, but for full integration, where one remote does everything, activating the CEC is critical.
💡
Before setting up, take a picture of the current image and sound settings on your Xiaomi TV. In the process of experimenting with CEC settings, the parameters can be reset to factory settings.
It is worth noting that some Xiaomi models have an aggressive power saving system that can block external on signals. If the TV does not respond to on commands from the Rostelecom remote, try turning off the Quick Start or Eco Mode function in the TV settings, if any.
Method 1: Configure via HDMI-CEC (Automatic Control)
This is the most modern and convenient way to turn the console into a full-fledged TV remote. CEC It allows you to send commands directly through HDMI-When you press the power button on the Rostelecom remote, the console sends a signal to the Xiaomi TV to turn on.
To implement this method, connect the console to the HDMI 1 port (or any other, but remember the number). Go to the settings of the Rostelecom console: Settings → System → HDMI-CEC. Make sure the function is activated. Now when you turn on the console, the TV should automatically turn on, switching to the desired signal source.
Volume and menu controls can also be broadcast. However, sometimes a Xiaomi TV can ignore the volume commands from the console if the audio settings select the output "Optical" or "Bluetooth". Return the output to the TV Speakers or HDMI ARC to control correctly.
☑️ Verification HDMI-CEC
In some cases, you need to "handhake" again. To do this, turn off the TV and the console, disconnect the TV power cable from the socket for 1 minute, then turn everything back on. This will reset the cache of the HDMI controller in the Xiaomi TV.
Method 2: IR training remote (Classical method)
If HDMI-CEC doesn't work or your Rostelecom remote model doesn't support TV commands, use the training function. RT-PM-02 remotes and later have a special mode to "remember" codes from another remote. You'll need a native Xiaomi TV remote.
To enter training mode on the remote Rostelecom usually need to press the buttons at the same time. TV (or OK and TV, It depends on the model, until the indicator lights up all the time, and then you can put the remotes up to each other's noses at a distance. 2-3 centimeter.
Press the button you want to program (e.g. volume +), on the Rostelecom remote (the indicator will start to blink), then immediately press the corresponding button on the Xiaomi remote. If the training is successful, the indicator will blink several times. Repeat the procedure for all necessary buttons: On/off, Volume, Signal Source.
| Action. | Indication of the remote by Rostelecom | User action |
|---|---|---|
| Entrance to training regime | It's burning all the time. | Click TV + OK (or special combination) |
| Selecting a button for writing | Blink 1 time | Press the button on the remote Rostelecom |
| Transfer of code | Blinking fast. | Press the button on the Xiaomi remote (point-out) |
| Conservation | Blink 3 times | Wait for completion or press OK |
⚠️ Note: When training remotes, the distance between IR ports should be minimal (1-3 If you step back, the Rostelecom remote may not read the code, and the indicator will go out with an error.
What to do if the remote is not learning?
Method 3: Use of Universal Codes and Auto Search
Rostelecom remotes often already have codebases for popular brands, including Xiaomi, that you can try to activate manually, without learning, and you need to enter programming mode (often by pressing the TV button or OK + TV combinations).
Once you enter mode, the remote may suggest entering the brand code from the instructions or starting an auto search. When auto search, you should point the remote to the TV and press the volume button or other function key. As soon as the reaction (volume scale) appears on the Xiaomi screen, you should immediately press the save button (usually OK or TV).
This method is less accurate than IR learning, as the codes may not match in part (e.g. volume works but no shutdown works).
Solving and conflict situations
Even with the right setup, there can be disruptions. Often users are faced with a situation where the Rostelecom remote controls the console, but the Xiaomi TV ignores the volume commands.This may be due to the fact that Android TV prioritizes software sound control over hardware.
Try changing the settings in Settings → Apps → All Apps → Android (or similar system application) settings and clear the cache. Also check if the MI Remote app or other control programs that can intercept IR signals are installed.
If the remote "gluts" after updating the console firmware, perform a complete reset of the remote, usually by removing the batteries and pressing all the buttons for 10 seconds, or a special combination (as indicated in the instructions for a specific model of the RT-PM remote).
- 🔄 Reboot both devices (TV and consoles) on power.
- 🔋 Replacement of batteries with new alkaline batteries).
- 📡 Checking for the absence of interference from other IR devices (air conditioner, lamps).
- ⚙️ Resetting remote settings Rostelecom to factory.
💡
If neither method works, it is possible that the IR receiver on the Xiaomi TV is closed with a decorative frame or damaged, in which case the only solution is to use HDMI-CEC or buy a universal remote with Bluetooth support.