How to connect Xiaomi Mi True Wireless Earphones 2 Basic

Xiaomi’s all-wireless headphones continue to grow in popularity, and the Mi True Wireless Earphones 2 Basic has become a hit thanks to its excellent price-performance ratio. Users often choose this gadget for a stable connection, clean sound and a convenient charging case. However, the initial setup process can raise questions for those who first encounter this kind of acoustics or switch from wired models. In this guide, we will discuss all the stages of pairing in detail so that you can start enjoying music as quickly as possible.

It is important to understand that the procedure for activating the pairing mode here has its own features that distinguish this model from its predecessors. Standard opening of the case cover for automatic device search may not be enough if you connect headphones to a new gadget for the first time. We will look at the nuances of working with Android and iOS operating systems, since the algorithms of actions may differ slightly. Following the instructions will help to avoid common errors and save time on setup.

In addition, the article will address the issues of diagnosis and troubleshooting that can occur during operation. Sometimes the device is not detected by the phone due to a discharged battery or software failures that require a complete reset. We have prepared answers to frequent questions and useful tips that will help to extend the life of your gadget and ensure a stable connection throughout use.

Preparation of headphones for the first turn on

Before trying to find a device on the list of available Bluetooth gadgets, you need to make sure that it is ready to go. Often users forget that new electronic devices come with protective insulators on charging contacts that block the current supply. Be sure to remove the transparent stickers from the charging contacts on the headphones themselves before installing them in the case, otherwise they will remain discharged and will not turn on. This is a critical step that is often forgotten when unpacking.

After removing the protective elements, place the headphones in the charging case and close the lid. The indicator inside the case should light up, signaling the start of the charging process. If the indicator does not catch fire, check if the contacts fit tightly and wipe them with dry cloth. For full operation, it is recommended to charge the device for at least 30-60 minutes before first use, even if the indicator shows a full charge.

When charging, pay attention to the behavior of the indicator. Blinking light usually indicates the charging process, and burning with even light indicates that the battery is fully restored. The Mi True Wireless Earphones 2 Basic model has an efficient charging mechanism that allows you to quickly gain a capacity for listening to music. Don't ignore this stage, as working with a completely discharged battery can lead to an unstable connection.

• 🔋 Remove protective insulators from charging contacts on headphones.
• 🔌 Install headphones in the case and make sure the indicator catches fire.
• ⏳ Leave the device to charge for at least 30 minutes before the first start.
• 🧼 Wipe the metal contacts with dry cloth if charging is not going.

⚠️ Note: Do not use powerful smartphone chargers (Quick Charge) to charge the case unless the instructions indicate otherwise, as this may damage the battery power controller.

Activation of the pairing mode

Starting the search mode is a key step that requires a clear understanding of the sequence of actions. Unlike some other models, where pairing begins automatically when the lid is opened, manual intervention is often required. To activate the mode (pairing), you need to remove both earphones from the charging case, after removal, they will automatically go to standby mode, and the indicators on them will flash white.

If you don't automatically start, or you connect the device to a new phone after a previous use, you'll need a manual reset. Find the touch zones on the headphone legs. Pressing the touch panels of both headphones at the same time and holding them for 5-10 seconds will force the pairing mode to turn on. Indicators will flash faster, signaling readiness for connection.

It's important to keep the headphones close together at this point so they can sync together. The right earpiece in this model is usually the Master, and the left earpiece connects to it, creating a single stereo system. Only after they find each other will they become visible to your smartphone. This process takes only a few seconds, but requires hand stability and attention to display.

There's a nuance about reconnecting, and if you've used headphones with this phone before, when you remove them from the case, they should connect automatically. If that doesn't happen, maybe there's a conflict profile in the phone's memory that needs to be deleted, so you'd better remove the device from the Bluetooth list and start the process anew, following the search mode activation instructions.

Connecting to a smartphone on Android

The Android operating system offers ample options for customizing audio devices, but the basic connection process remains standard. Open your smartphone settings and go to the Bluetooth section. Make sure the switch is activated and the phone has started scanning available devices within range. Your model name on the list can appear as Mi True Wireless EBs Basic or similar.

Find the appropriate name in the list and click on it to initiate pairing. The screen may appear a request for confirmation of action or input. PIN-In most modern devices, the code is not required, or it is standard (0000), and the confirmation is automatic. Once you successfully connect, you will hear a characteristic beep in the headphones, and in the status bar of the phone there will be an icon of the connected device.

For Xiaomi and Redmi smartphone owners, the process can be even easier thanks to the fast technology. When you open a case next to an unlocked phone, an animated window can pop up offering to connect headphones. This is a proprietary feature of the MIUI shell that speeds up the setup. However, even without this window, the standard method through the Bluetooth menu works faultlessly on all versions of Android.

Once connected, check if the device is selected as the primary for output media sound. Sometimes the phone can only connect for calls, leaving the music to play through the speaker. In Bluetooth settings, clicking on the gear next to the headphone name, make sure that the ticks are in front of the "Multimedia" and "Audio" items.

Compatibility with Apple devices (iOS)

iPhone owners can also easily use Mi True Wireless Earphones 2 Basic, although some of Xiaomi's branded features will not be available.The iOS connection process is as unified as possible. Open "Settings" on your iPhone or iPad and select "Bluetooth" section. Make sure the feature is enabled and the phone is in detection mode.

Activate the pairing mode on the headphones, as described earlier (extract from the case or long press). In the list of "Other devices" on the smartphone screen should appear the name of your headset. Click on it. iOS will request confirmation of pairing - press "Connect". In a few seconds the device will go to the status "Connected".

It’s worth noting that iOS doesn’t have access to full functionality through the app that’s available on Android.You’ll be able to manage music and calls, but setting up an equalizer or updating your firmware can be difficult without third-party solutions.However, basic functionality, including microphone and touch controls, works correctly.Sound quality on Apple devices remains high thanks to support for the AAC codec.

If you plan to use headphones with multiple Apple devices, such as iPhones and iPads, remember the auto-switch feature. It only works inside the Apple ecosystem with the original AirPods. In the case of Xiaomi, you'll have to manually switch Bluetooth in each device's settings when you want to change the sound source.

Use of the Xiaomi Earbuds app

To unlock the full potential of your Mi True Wireless Earphones 2 Basic, it is highly recommended to install the official Xiaomi Earbuds app.It is available in the Google Play Market and allows you to access hidden settings that are not available through the standard Bluetooth menu.The app automatically detects the connected headphones and displays the charge level of each of them individually, which is very convenient for monitoring.

Inside the app, you'll find an equalizer with multiple (preset) modes, such as Bass, Vocals or High Frequency, which allows you to tailor the sound to your musical taste or genre of tracks, and you can reassign the actions of the touchpads, such as setting up a double tap to switch tracks, and a triple tap to call a voice assistant.

Another important feature of the app is the firmware update, which is that developers periodically release updates that improve the stability of the connection and the quality of the microphone noise reduction. If you notice problems in the work, check for updates in the application. The process takes a couple of minutes and requires that the headphones be near the phone and be charged.

• 📱 Download the Xiaomi Earbuds app from the official store.
• ⚙️ Set up sensory control to suit your habits.
• 🎚️ Use the built-in equalizer to improve sound.
• 🔄 Check the “Updates” section regularly to improve stability.

⚠️ Note: During the firmware update, do not open the case and do not remove the headphones from the phone, interruption of the process can lead to a break in the device.

Solution and resetting of settings

Even the most reliable devices can sometimes malfunction. If one earbud stops sounding, the sound is quiet or the phone doesn't see the headset at all, it's most often a complete reset (Reset) to perform this procedure, place both earbuds in a case. Make sure they charge (the indicators are on fire). Then press and hold the touchpads on both earbuds simultaneously for 10-15 seconds until the indicators light up red and then go out or blink white.

Once reset, remove the device from the Bluetooth list on the phone ("Forget the device") and pair it again as if you were doing it for the first time, which clears the connection cache and eliminates software conflicts, and check if the speakers' grids are contaminated with earwax or dust, which can significantly worsen the sound.

If the problem is an unstable connection (sound breaks), try to disable other active Bluetooth devices nearby. Sometimes interference from Wi-Fi routers or microwave ovens can also affect the signal, as they operate in a similar frequency range of 2.4 GHz. Moving to another point in the room often solves the problem.

In rare cases, the problem may be with the smartphone itself. Rebooting the phone or resetting the network settings can help restore the normal operation of the Bluetooth module. If none of the methods worked, there may be a hardware malfunction that requires contacting the service center.

Operation and care tips

To make your Mi True Wireless Earphones 2 Basic last and enjoy a quality sound, it is important to follow simple rules of operation. Moisture is the main enemy of electronics, so avoid using headphones during rain or intense workouts when sweating is maximum. Although the model has spray protection, diving in water or steam in the sauna is categorically contraindicated.

Clean the case and the headphones themselves regularly. Use dry soft cloth or cotton swab lightly moistened with alcohol (for contacts), but keep liquid out of the holes. Clean contacts ensure fast and correct charging, preventing oxidation. Also keep the speaker mesh clean, as contamination leads to high frequency loss and volume reduction.

💡

Keep your headphones in a case with the lid closed, even if you don’t plan to use them for a long time, which will protect them from dust and prevent deep discharge, as in the case they often go into sleep mode.

Don't leave your headphones and case in direct sunlight or near heaters. Lithium-ion batteries are sensitive to temperature changes, which can lead to lower capacity and bloating. The optimal storage temperature is room temperature. These simple rules will allow you to enjoy your favorite music for years without losing quality.

💡

Regular cleaning of contacts and speaker grids is the best prevention of sound and charging problems, which prolongs the life of the device by 30-40%.