Connecting Xiaomi to a TV LG: all manner of settings

Introduction: Why to connect Xiaomi to the LG And what it takes

Xiaomi’s modern consoles, such as Mi Box S, Mi TV Stick 4K Mi Box 4: Turning Old TVs LG Fully-fledged smart centers with access to Android TV, But many users have problems with the first connection: no image, no sound, or no set-top box. In this article, we'll look at all the current ways of connecting, from basic to basic. HDMI-Connection before configuring wireless protocols.

Before you start, check out three key points: the version. HDMI-port LG (for 4K-content HDMI 2.0 Option compatibility (some Xiaomi models do not support) 1366×768, budgetary LG) and the presence of the original power cable - Chinese counterparts often cause failures when high load. 2015 a year, perhaps, will be required HDMI-ARC adapter for correct sound operation.

We're going to look at not only physical connectivity, but also optimizing settings for smooth video playback, synchronizing remotes, and solving common errors like "no signal" or "black screen." LG from WebOS, where the configuration of external devices has its nuances.

Method 1: Connecting through HDMI — base-method

The most reliable and universal way is to use HDMI-And there's a cable that comes with a console, but even here, there are pitfalls. HDMI on LG They are labeled differently: some only support 1080p@60Hz, other — 4K@30Hz or 60Hz. For example, on televisions. LG OLED C1 port HDMI 2 Optimized for gaming consoles and can conflict with Xiaomi Mi Box.

Second, if you're black after you've connected, try rebooting the console by holding the power button for 10 seconds, and that'll reset the output resolution to the base one. LG Power saving mode, which shuts down unused ports to shut it down:

1. On the remote. LG press Settings (cogwheel).
2. Go to All Settings → General. → Eco-regime.
3. Turn off the Auto-Disable option. HDMI.

If there is an image, but it is “blurred” or cropped at the edges, go to the settings of the Xiaomi console:

• 📺 Screen resolution: select 1920×1080@60Hz (even 4K-TV, if there are artifacts).
• 🔊 Sound format: for LG better PCM Dolby Digital is used when the sound is interrupted.
• 🎮 Regime. HDMI: Include Extended (for models with) HDMI 2.1).

Check the version. HDMI-port LG (You need 2.0. 4K)

Use the original cable from the Xiaomi kit

Turn it off. LG Mode "Game" or "Cinema" in the settings HDMI

Make sure the console gets enough power (not through the USB-hub)

-->

Method 2: Wireless Wi-Fi Direct and Miracast

If the wires irritate you or HDMI-The port is occupied by another device, you can connect Xiaomi to the port. LG There are two protocols for this: Wi-Fi Direct (for broadcasting content from a set-top box to a TV) and Miracast (screen mirroring), both of which require both devices to be connected to the same network or create their own access point.

Setting up Wi-Fi Direct on Xiaomi Mi Box:

1. Go to Settings. → The device → Connection and sharing.
2. Select Wi-Fi Direct and activate visibility.
3. On TV. LG Open the settings. → Network → Wi-Fi Direct and find your console.

For Miracast, the algorithm is different:

• 🔄 On Xiaomi, turn on the Wireless Display in the screen settings.
• 📡 Nana LG Go to Settings. → Connections → Screen mirroring.
• ⚡ Wait for synchronization (can take up to 30 seconds).

Important: With wireless connection, there may be delays of up to 200 ms to reduce the lag:

• 📶 Switch the router to 5 GHz (less busy).
• 🔌 Connect the console to the router with an Ethernet cable (if the model supports the).
• 🔇 In Xiaomi's audio settings, select Exit through HDMI, Even if you use Wi-Fi.

Method 3: Connecting via Bluetooth – for sound and remotes

Bluetooth in Xiaomi consoles is more often used to connect wireless headphones, gamepads or keyboards, but it can be used to synchronize with the TV. LG. For example, if you have a model that supports Bluetooth 5.0 (like the one you use). LG CX or newer, you can:

• 🎧 Transmit the sound from the console directly to the built-in speakers LG (circumvention HDMI).
• 🎮 Use the remote control LG To manage Xiaomi (requires settings settings) → DU remote).
• 🔊 Connect an external sound system via TV, not via a console.

To connect devices via Bluetooth:

1. On Xiaomi, go to Settings → The device → Bluetooth and turn on search.
2. Nana LG Open the settings. → Sound. → Bluetooth devices.
3. Select your console from the list and confirm pairing (may be required) PIN 0000 or 1234).

Please note: not all models LG They support Bluetooth audio transmission from external devices, such as series TVs. UK6200 They can only output sound to headphones, but they can't accept it. LG.

Solving Typical Connection Problems

Even with the right setup, there can be failures, and let's look at the most common ones and how to fix them:

Blind mode for resolution settings (if the screen is black):

1. Connect the console to the TV and wait for the download (about 1 minute).
2. On the Xiaomi remote, click sequentially: Back → Back up. → Down. → Down. → Entering → Up. → Up. → Enter This will open the permission reset menu.
3. Choose. 720p@60Hz and confirm.

💡

If Xiaomi does not respond to the remote, try rebooting it through the Mi Remote mobile app (available for the user). Android/iOS). Both devices must be on the same Wi-Fi network.

Optimizing settings for smooth playback

Once you've successfully connected, you have to set up the set-top box and the TV for a comfortable viewing experience, and let's start by calibrating the image:

• 🎨 Nana LG Turn off all post-processing: TruMo, Noise Reduction and Dynamic Contrast (they add lags).
• 🖥️ On Xiaomi in Settings → Display and sound select Movie Mode instead of Dynamic.
• 🔍 If the text is blurry, turn on Sharpness at 50% (more - artifacts will appear).

For sound, we recommend:

• 🔊 Nana LG set up PCM (In Settings → Sound. → HDMI).
• 🎵 On Xiaomi, turn off Dolby Digital Plus if you hear clicks.
• 📻 For music, turn on the equalizer with Basa's preset.

If you're watching IPTV Streaming services (Netflix, YouTube), activate on Xiaomi:

• 🌐 Adaptive streaming (in network settings).
• 📡 The priority of Wi-Fi over mobile data.
• 🔄 Auto-update applications only over Wi-Fi.

💡

For models LG OLED (C1, C2, G1) be sure to turn it off AI Sound Pro in Sound Settings – This feature conflicts with external sources, including Xiaomi.

Synchronization of remotes: how to manage Xiaomi from the remote LG

One of the most convenient chips is the ability to control the Xiaomi console with a standard remote control from the LG. This is done using technology. HDMI-CEC, But you need to configure it correctly on both devices.

On LG TV:

1. Go to Settings. → General. → Devices → SIMPlink (HDMI-CEC).
2. Turn on the option and set Device Mode to the External Player.

On the Xiaomi console:

1. Go to Settings → Device → HDMI-CEC.
2. Activate TV Control and Single Configuration.
3. In the section "Conjugation of the remote" select LG brand-list.

After synchronization, check the key buttons:

• 🔘 Home button on the remote LG Open the main Android menu TV.
• 🔽 Shooters and OK work in navigation.
• 🔙 The Back button (usually marked with the left arrow) returns to the previous screen.

If some buttons don’t work, update the remote firmware via Settings → DU remote → Update to Xiaomi. LG 2020 and later may require manual button binding via the Universal remote menu.

💡

If the remote LG not synchronized, try resetting it: press the Back and Home buttons for 5 seconds until the indicator flashes.

Update firmware and reset settings

If Xiaomi is unstable (hangs, playback errors), the cause may be outdated firmware. the update solves most compatibility problems, especially for new models LG WebOS 6.0+.

To update the Xiaomi Mi Box:

1. Go to Settings. → The device → Updating the system.
2. Select Check for Updates.
3. If a new version is available, confirm the installation (the console will restart).

For manual firmware installation (if automatic update does not work):

1. Download the latest version from the official Xiaomi website (the support section of your model).
2. Copy the file. update.zip flash-drive FAT32.
3. Connect the flash drive to the console and in the update menu select Local Update.

If after the update the console began to work worse, reset to factory settings:

1. Go to Settings → Device → Reset.
2. Select Erase all data (resetting Wi-Fi and accounts will be required).

FAQ: Answers to Frequent Questions