How to connect a new remote to the TV Xiaomi: 3 working ways + fixing

Lost or broke your native remote from Xiaomi TV? bought a universal remote or an additional original Mi Remote, but do not know how to sync it? In this article you will find step-by-step instructions for all modern Xiaomi Mi models TV, Redmi Smart TV Xiaomi TV A Pro, including Bluetooth connectivity, IR port and mobile app.

We will analyze not only the standard pairing procedure, but also unique nuances for Android TVs. TV 11/12 and MIUI TV, And that's something that the manufacturer often doesn't mention in official manuals, like why a new remote control might not be determined by the system, even if you did it "as instructed," and how to get around this problem without resetting the settings.

If your TV doesn't respond to commands from the remote, don't rush it to the service center. 90% of the time, the problem is solved in 5-10 minutes using one of the methods described below. And if you've tried to connect the remote, but it didn't work, look at the section with typical errors and their solutions.

1. How to determine the type of connection of your Xiaomi remote

Before you start synchronizing, you need to understand which communication protocol your remote is using, and that's what the whole connectivity algorithm depends on. Xiaomi has three types of remotes:

• 📶 Bluetooth remotes (most modern models, for example, Mi) TV Remote 2 or Xiaomi TV Master Remote. Operates at 2.4 GHz, requires pairing like a wireless headset.
• 🔦 IR remotes (old models or universal remotes) use an infrared port, do not need synchronization, but require a line of sight.
• 📱 Hybrid remotes (e.g. Xiaomi Mi Remote Pro) combine Bluetooth for basic functions and IR for controlling other devices (air conditioners, audio systems).

To find out the type of remote:

1. Look at the box or sticker on the back of the remote – there should be a Bluetooth mark or IR.
2. If there is no box, check the settings of the TV: go to Settings → Devices → Remotes and accessories. If the remote is on the list, but it's not working, it's Bluetooth.
3. Hold the remote to the front camera of your smartphone and press any button. If you see an IR emitter flickering in the lens (like a conventional remote), this is an IR model.

If you use a universal remote (for example, from Samsung or LG), then TV You will need to set it up in Mi mode. TV Android TV We'll talk about this in a separate section.

2. Connecting Bluetooth remote to Xiaomi TV: step-by-step

Xiaomi's modern TVs (starting with Mi) TV 4S And newer than that, they support Bluetooth remotes by default. Here's how to do it:

Turn on the TV (use the power button on the case or mobile app)

Make sure the remote is charged (the indicator should be green or flash when you press the buttons)

Place the remote control at a distance of no more than 1 meter from the TV

Remove old paired devices in settings (if any)-->

1. Activate the pairing mode on the remote: For most Xiaomi models, you need to simultaneously press the Menu buttons + OK (home + Back) for 5-7 seconds until the indicator flashes quickly. If the indicator does not flash Check the battery charge (connect the remote to the USB-If the indicator is still not responding, the button or the remote board may have malfunctioned.
2. Start a device search on your TV: Go to Settings → Devices → Remote and accessories → Add accessory, the TV will start scanning.
3. Select the remote from the list: In the list of found devices will appear the name of your remote (for example, Mi Remote or Xiaomi). TV Remote. Select it and press it. OK.
4. Confirm pairing: A confirmation request will appear on the TV screen and remote (indicator). OK On the remote or select Confirm on TV.

If the TV doesn't find the remote, try:

• 🔄 Restart the TV (unplug the network for 30 seconds).
• 📱 Update the firmware (go to Settings) → On TV. → Updating the system).
• 🔌 Reset Bluetooth settings in Settings → System system → Reset → Resetting network settings.

💡

If the remote is connected, but not all buttons work, check the regional settings of the TV. For Russia, you should select the region "Russia" or "Europa" in Settings → Language and region.

3. IR remote setup for Xiaomi TV

Infrared remotes do not require pairing, but they must be properly programmed to fit your TV model. If you use a universal IR remote (such as from Huayu or One For All), follow this instruction:

1. Find the code for Xiaomi TV: The instructions for the universal remote should contain a list of codes for different brands. For Xiaomi, the most common codes are: 0178, 0180, 0515 or 1178.
2. Activate Programming Mode: Most universal remotes need to press the button SET (or CODE SEARCH) until the indicator is constantly lit up.
3. Enter the code: Type the code for Xiaomi (e.g. 0178) using digital buttons. The indicator should blink 2 times.
4. Check the work: Point the remote to the TV and press Power. If the TV is turned off, the setup was successful.

If the code is not suitable, try automatic search:

1. Hold it. SET + Power for 3 seconds (the indicator will burn constantly).
2. Point the remote to the TV and press Power every 2 seconds until the TV is turned off.
3. Immediately after switching off, press SET, preserve the code.

💡

If the universal remote controls volume but doesn’t switch channels, try programming it in Android mode. TV instead of Mi TV.

⚠️ Note: Some universal remotes do not support voice search and Quick Access buttons (Netflix, Prime Video) on Xiaomi TV. For full management you will have to use the original remote or mobile application.

4.Management of Xiaomi TV without remote control: mobile application

If you don't have a physical remote, you can use your smartphone as a temporary replacement, and the official Mi Remote app (available for Android and iOS) will do that.

1. Download the app: Install Mi Remote from Google Play or the App Store.
2. Connect to the same network: The TV and smartphone must be connected to the same Wi-Fi network. If you don't have a router, use hotspot mode on your phone.
3. Add the TV to the app: Open Mi Remote, press + → Television → Xiaomi.The app will automatically find your TV on the local network.
4. Confirm pairing: The connection request will appear on the TV screen. Confirm it using buttons on the TV body or through Settings. → Devices → Connected devices.

Advantages of management through the application:

• 🎛️ Full Replacement of the remote with support for voice search and gestures.
• 🔍 The ability to use a virtual keyboard to enter text (convenient for YouTube or browser).
• 📱 It works even if the Bluetooth remote is lost or discharged.

⚠️ Attention: On Android TVs TV 9 and below, Mi Remote may not work well, in which case you can use the alternative: Google. TV App (Available for Android) or Unified Remote.

Typical problems and their solutions

If the remote is not connected or is malfunctioning, check these points:

If none of these methods helped, try resetting the TV settings to factory:

1. Go to Settings. → The device → Reset → Resetting all settings.
2. Enter. PIN-code (default 0000 or 1234).
3. After restarting, reconnect the remote.

6.How to Program a Universal Remote for Xiaomi TV

If you use a remote from another manufacturer (such as Samsung, LG Or Philips, it can be adapted to Xiaomi. TV Here's a list of proven codes for popular brands:

Programming instructions:

1. Turn on the TV with a button on the body.
2. On the remote, hold it. SETUP (or CODE SEARCH) flashing.
3. Enter the first code from the table (e.g., 0178).
4. Point the remote to the TV and press Power. If the TV is off, the code fits.
5. Check the rest of the buttons. If any of them don't work, repeat the procedure with another code.

If none of the code fits, try learning buttons (if your remote supports this feature):

1. Place the original Xiaomi remote and the universal one next to you (2-3 cm away).
2. On the universal remote, press. LEARN (or MEMORY).
3. Press the button on the original remote, then the same button on the universal.
4. Repeat for all necessary buttons.

7. Set up the Xiaomi voice remote (Mi Voice Remote)

Voice-enabled remotes (such as the Xiaomi Mi Voice Remote 2) require additional customization.

1. Connect the remote over Bluetooth (as described in Section 2).
2. Activate the voice assistant: Go to Settings → Devices → Remote and accessories, select your remote and enable the option Voice input.
3. Configure the language: In Settings → Language and region → Select Russian (Russian) voice search).
4. Test the microphone: Press the Voice Search button (with a microphone image) and say a command, such as: Open Netflix or Turn on cartoons.

If voice search doesn’t work:

• 🔊 Check if the microphone is turned off in the privacy settings (Settings) → Confidentiality → Microphone).
• 📶 Make sure your TV is connected to the internet (voice commands are handled by Xiaomi’s cloud service).
• 🔄 Update your TV firmware and Mi Remote app to the latest version.

💡

Voice search on Xiaomi TV It only works with official Xiaomi remotes, and universal remotes, even with a microphone, don't support this feature.

Frequent questions about connecting remotes to Xiaomi TV