Xiaomi Redmi Note 10 Pro
Snapdragon 732G
120 Hz
In this article, you will find practical tips on how to return the smartphone to its previous speed, extend the battery life and make room for new photos and applications. We will analyze both software settings (turning off the MIUI background, optimizing autoload) and hardware tricks (replacing the thermal paste, calibrating the battery). All tips are tested on current versions of MIUI 14/15 and adapted for the Redmi Note 10 Pro (sweet/sweetin).
⚠️ Note: Some methods (such as unlocking the bootloader or firmware custom recovery) can lead to loss of warranty or "brick" of the device. If you are not sure about your actions, skip these sections or contact a specialist.
1. Cleaning the system: remove garbage and cache
The first step to optimizing is getting rid of digital junk. MIUI is known for its love of background processes and accumulated cache, which over time takes up gigabytes of memory. Let's start with the safest one: built-in cleaning tools.
Open the Security app (the shield icon) and go to Cleanup, where the system automatically scans the device for:
- 🗑️ Unnecessary files (remains of remote applications, temporary data)
- 📁 Application cache (can take up to 5-10 GB)
- 📥 Downloads (old) APK, images, documents)
- 🎵 Duplicate media files (photo, video, audio)
After analysis, click Clean, but do not delete the cache of system applications (for example, com.android.systemui) - this can lead to interface failures. For deep cleaning, use Deep Cleaning mode, but be prepared for the fact that some applications (for example, messengers) will have to be authorized again.
⚠️ Note: If after cleaning the cache, the applications began to work unstable (for example, YouTube is constantly restarting), go to the settings of this application (Settings) → Annexes → [Name of name] → Storage) and manually clean only the cache without touching the data.
💡
To clean up took less time, before it starts, transfer the smartphone to aircraft mode - this will stop background processes that can block the deletion of files.
2. Optimization of autoboot and background processes
MIUI aggressively manages background processes, but often does so suboptimally: some apps (like Facebook or TikTok) continue to run in the background even if you don't use them, which consumes up to 20% of the battery and loads the processor.
To limit autoloading:
- Go to Settings → Applications → Application Management.
- Select an app (like Instagram) and tap on AutoRun.
- Turn off Auto Start, Secondary Start and Background Activity options.
For mass shutdown, use Battery Mode and Performance → Battery Management. Here you can select applications and apply Restricted Mode to them (they will not work in the background and will not receive push notifications).
⚠️ Note: Do not limit system services with the names com.miui., com.android. or com.google. – this can lead to unstable smartphone operation (for example, stop coming). SMS call-notification).
3. Performance adjustment: acceleration or energy saving?
The Redmi Note 10 Pro supports dynamic CPU frequency change, but by default, MIUI chooses a balance between performance and power consumption. If you want top speed (for example, for games), activate Performance mode:
- Settings → Battery and performance → Performance mode.
- Choose High Performance (increases heating and battery consumption).
To save charge, choose Energy Saving or Balanced. It is also useful to turn off Adaptive Brightness (in Settings → Display) and manually set a comfortable lighting level - this will save up to 15% of charge per day.
If you like to play, turn on the game settings (Settings → Special features → Game mode) option Improved tactile response – this will reduce delays when touching in shooters like PUBG Mobile or Call of Duty.
How to check the actual frequency of the processor?
4. Battery optimization: calibration and care
The Redmi Note 10 Pro (5,020 mAh) battery loses capacity over time to extend its life.
- 🔋 Avoid deep discharge (below 10%) and recharge (above 90%).
- ⚡ Use an original or certified RMS (33W fast-charging).
- 🌡️ Do not use your smartphone at temperatures below 0°C or higher than 40°C.
- 🔄 Calibrate the battery once every 3 months: completely discharge the device before turning off, then charge to 100% without interruptions.
To check the status of the battery, enter the phone code in the application:
##4636##Go to Battery Information, Battery health should be close to 100%, and if it's below 80%, it's time to replace the battery.
Disable battery optimization for system applications
Close all background processes
Use the original cable and adapter
Do not interrupt the charging/discharge cycle-->
| Battery status | Health level (%) | Recommendations |
|---|---|---|
| Excellent. | 95–100% | Continue to operate as normal. |
| Good. | 85–94% | Reduce deep discharge cycles, avoid overheating |
| Satisfactory | 70–84% | Calibrate the battery once a month, reduce fast charging time |
| Critical | Less than 70% | Replace the battery at the service center |
5. Memory Release: What Can Be Deleted Without Risk?
Redmi Note 10 Pro was produced with 64/128 GB of memory, but is really available to the user 10-15 GB less due to the preinstalled MIUI.
- 📱 Remove system applications (without root): use ADB (guideline).
- 🎥 Transfer media files to microSD (up to 512 GB, exFAT format).
- ☁️ Automatic uploading of photos to Google Photos or Mi Cloud, followed by deleting local copies.
- 🗃️ Cleaning the Download folder and the map cache (Google Maps, Yandex.Navigator).
To remove system applications through ADB:
- Turn on USB Debugging in Settings → About Phone → MIUI version (tap 7 times, then go back to Additional → For Developers).
- Connect your smartphone to your PC, open the command line and type: adb shell pm uninstall -k --user 0 [name packet] Examples of uninstall packets: com.miui.analytics - statistics collection Xiaomi com.xiaomi.midrop - Mi Drop (if not used) com.miui.videoplayer - standard video player
⚠️ Note: Do not delete packages with the names com.android., com.qualcomm. or com.miui.home, this will cause the system to fail!
💡
Removing system applications via ADB does not require root rights, but you can restore them only through a full reset.
6. Firmware update: MIUI or caste?
Up-to-date firmware fixes bugs, improves performance and closes vulnerabilities. Xiaomi releases updates for the Redmi Note 10 Pro every 2-3 months. Check for updates in Settings → About Phone → System Update.
If the official updates stopped coming out (device on MIUI 13 and below), consider the options:
- 🔄 Manual update via Recovery: download the firmware from the official website (choose Global region or EEA).
- 🛠️ Custom firmware (e.g. LineageOS, Pixel Experience): Requires unlocking the bootloader and installing TWRP.
- 📱 Firmware port from other devices (for example, POCO X3 Pro, which has a similar iron).
If your smartphone has a bad network signal (often 4G/LTE goes missing), check the antenna contacts under the back cover. They may have oxidized or moved away. Clean them carefully with a blower or alcohol.
⚠️ Note: When disassembling the Redmi Note 10 Pro, it is easy to damage the fingerprint scanner plume (going under the battery). If the scanner does not work after assembly, check the integrity of the plume and the reliability of its attachment.
8. Alternative launchers and shells
The MIUI interface is not popular with everyone because of the abundance of advertising and the not always logical organization of the menu. Alternative launchers can speed up the system and improve ergonomics:
- 🏠 Nova Launcher: lightweight, with gesture support and icon customization.
- 🎨 Lawnchair: Minimalistic launcher with Pixel-style function.
- 🔧 Hyperion Launcher: Optimized for gaming (hidden notifications during gameplay).