How to set up TV on Xiaomi TV: digital, satellite and IP-TV

Setting up TV on Xiaomi smart TVs is a process that many people find difficult only at first glance. In fact, the manufacturer has simplified the interface as much as possible so that even a beginner can understand without the help of specialists. In this article, we will take a closer look at all the ways to set up digital (DVB-T2), satellite (DVB-S2) and IP-TV on popular Mi models TV 4A, 4S, 5X, A Pro and others.

The main problem with users is that they don't have a universal instruction manual, because the algorithm depends on the type of broadcast, the region, even the firmware version. We've collected up-to-date data for 2026, including nuances for new models with Google. TV If you just bought a TV or moved to another region, this article will help you avoid the typical errors when scanning channels.

Preparing Xiaomi TV for TV setup

Before you start searching for channels, you need to follow a few mandatory steps, and if you skip them, you run the risk of problems such as no signal or an incomplete list of channels.

First, make sure your Xiaomi is yours. TV connected to an antenna or satellite dish via a corresponding connector (DVB-T2) standardized RF-IN (coaxial cable, for satellite — LNB IN. If you're setting up IP-Check your internet connection via Wi-Fi or Ethernet cable.

• 📡 For terrestrial TV: Use an amplifier indoor or outdoor antenna (recommended for remote regions).
• 🛰️ For satellite TV: check whether the dish is pointing at the satellite (for example, Yamal 201 or Absolute 36E).
• 🌐 For IP-TV: Internet speed must be at least 15 Mbps for stable browsing in Full HD.

The second important thing is to update the software, because the outdated firmware may not support new broadcast standards or may contain errors in scanning channels.

1. Go to Settings → About TV → System Update.
2. Click Check Updates and wait for the process to complete.
3. If an update is found, confirm the installation and restart the device.

Setup of digital terrestrial TV (DVB-T2) Xiaomi

Digital broadcast television standard DVB-T2 — The most common way to view channels without a subscription fee. 20 Free channels in multiplexes of RTRS-1 and RTRS-2. Setup on Xiaomi TV no more 5 minutes if the signal is stable.

Instructions for PatchWall models (e.g. Mi) TV 5X, Mi TV Q2):

1. On the remote, press the Home button and select Settings (⚙️).
2. Go to the Television and Entrances section → Tune in TV.
3. Select a Digital antenna (DVB-T/T2).
4. Please indicate the country (Russia or Kazakhstan, depending on the region).
5. Run an automatic search and wait until it is completed (usually). 2-5 minute).

If the automatic search didn’t find all channels, try manually configuring:

• In the TV settings menu, select Manual Search.
• Specify multiplex frequencies for your region (for example, for Moscow: 546 MHz and 666 MHz).
• Configure the settings: Modulation: 256 QAM Stream: 8 MHz ID Networks: Auto

Ensure the serviceability of the antenna|Check the connection of the cable to the connector RF-IN|Update the TV firmware|Select the right region in the settings|Shut down. VPN (if used)

-->

Important: If the TV does not find channels at the frequencies indicated on the RTRS website, try resetting the TV settings to the factory (Settings) → On TV. → Reset) and repeat the search.

Satellite TV setup (DVB-S2) Xiaomi TV

Satellite TV requires more complex setup than on-air, as you need to specify the parameters of a particular satellite and transponder. TV Supported by popular satellites: Yamal 201 (90)°E), Absolute 36E (36)°E), Eutelsat 36B (36°E) and others.

Step-by-step:

1. Connect the cable from the satellite dish to the connector LNB IN back-screen.
2. Go to Settings. → Television and entrances → Tune in TV → Satellite antenna (DVB-S2).
3. Select Add Satellite and specify its name (e.g. Yamal 201).
4. Enter the parameters LNB: Type LNB: Standard (Universal) Frequency LNB: 10750 Polarization: Automatic or Horizontal/Vertical (depending on plate)

Searching channels

Network

Tricolor

NTV-Plus

If the TV doesn’t find channels, check:

• 📶 Correctness of the dish getting stuck (you can use the SatFinder app on your smartphone).
• 🔌 Quality of cable connection (whether there is damage or oxidation of connectors).
• 📡 DiSEqC settings (if a switch between multiple plates is used).

💡

If you use Tricolor or NTV-Plus, activate the access card via the operator's official website before setting up. Without activation, channels will be found, but will not be broadcast.

Connection and setup IP-television (IPTV) Xiaomi

IP-TV is the modern way to watch TV over the Internet. TV It can be configured in two ways: through the built-in Live app. TV or through third-party programs like SS IPTV, Lazy IPTV.

Method 1: Through the built-in Live app TV

1. Open Live. TV mainscreen.
2. Select Add Playlist and Enter URL from your provider (usually in a format) http://.../playlist.m3u).
3. Please include the name of the playlist (for example, mine). IPTV) and keep.
4. Wait for the list of channels to load (it can take up to 1 minute).

Method 2: Through third-party applications (recommended for stability)

1. Install the app SS IPTV Lazy IPTV Google Play Market (available on Google models) TV).
2. Open the app and select Add Playlist.
3. Insert a link.m3u-file or download it from USB-storage.
4. Set up. EPG (TV programme) if provided by the provider.

If the channels are slowing down or not loading, check:

• 📶 Internet speed (minimum 15 Mbps for Full HD).
• 🔌 Connecting via cable instead of Wi-Fi (more stable).
• 🔄 Rebooting the router and TV.

Setup of cable TV (DVB-C) Xiaomi

Cable TV (standard) DVB-C) common in apartment buildings, where the signal is transmitted by coaxial cable from the operator (for example, Rostelecom, Dom.ru.

Instructions:

1. Connect the cable from the operator to the connector RF-IN.
2. Go to Settings. → Television and entrances → Tune in TV → Cable antenna (DVB-C).
3. Select Manual Search and specify options from your provider: Frequency: for example, 314 MHz (check with operator) Symbolic speed: 6875 ks/s. Modulation: 256 QAM.

Start the search and wait until it is completed.

If no channels are found:

• 📞 Check the parameters with your operator’s technical support.
• 🔄 Try resetting your TV settings (Settings) → On TV. → Reset).
• 🔌 Check the cable for damage (sometimes it helps to replace the F connector connector).

💡

For cable TV, be sure to check the network parameters (frequency, symbolic speed and modulation) with the provider. Without them, automatic search may not work.

Solving Common Problems When Set up TV

Even with the right setup, Xiaomi users TV Sometimes we have to deal with mistakes. Let's look at the most common ones and how to fix them.

Problem 1: TV can't find channels (0 channels found)

• 📡 Check the antenna/cable connection (try another connector if you have one).
• 📶 Make sure that there is digital TV in your area (check out the RTRS website).
• 🔄 Reset your TV settings to factory and repeat the search.
• 📱 Update your TV firmware (outdated software may not support new standards).

Problem 2: Channels found but not shown (black screen or no signal)

• 🔐 For satellite TV, check the activation of the access card (if you use Tricolor or NTV-Plus).
• 📡 For on-air TV, try reconfiguring the antenna (change its position).
• 🔌 Check the integrity of the cable (sometimes it helps to replace the new one).

Problem 3: Canals are slowed or interrupted (for the purpose of IPTV)

• 📶 Check the Internet speed (should be at least 10 Mbps for the SD and 20 Mbps for HD).
• 🔌 Connect the TV to the router via cable instead of Wi-Fi.
• 🔄 Restart router and TV.
• 📱 Update the app IPTV (if you use a third-party).

⚠️ Warning: If saved channels are lost after the firmware update, do not try to restore them through a backup. This may cause failures.

Additional settings: sorting, favorites, parental control

Once you have a successful TV setup, you can optimize your channel list for easy viewing. TV functions available:

1. Channel sorting

1. Open the channel list and click OK remote.
2. Choose Channel Management or Edit.
3. Use the buttons. ↑/↓ to move the channels in the right order.
4. Save the changes.

2. Add to favorites (favorites)

• Select the desired channel and press Star (*) or Favorites on the remote.
• To view your favorite channels, select the Favorite tab in the TV menu.

Parental control

1. Go to Settings → Security and Restrictions → Parental Controls.
2. Install. PIN-code (default frequency 0000 or 1234).
3. Choose channels or age restrictions to block.

💡

If you watch the same channels often, add them to your favorites, which will save you time when switching and make the interface cleaner.

FAQ: Frequent questions about setting up TV on Xiaomi