How to set up a Xiaomi Mi TV: a complete guide from connectivity to fine-tuning

Introduction: Why Xiaomi Mi TV Setup Needs a Special Approach

Xiaomi Mi TVs TV They gained popularity due to the combination of affordable prices, high quality 4K-screen and advanced Android operating system TV. But many users are faced with the fact that out of the box the device is not working at full capacity, the fact that the factory settings are optimized for universal use, and not for the specific conditions of your home — room lighting, acoustics or Internet speed.

In this article, we will not only look at the basic settings (network connection, account login), but also the hidden features that the manufacturer does not advertise, such as how to turn on Dolby Vision mode for streaming video, why sound is through the video. HDMI ARC It can be lost, and how to set up Google Assistant to manage a smart home. TV P1, Mi TV Q2 mi TV A Pro, as their firmware has key differences.

Important: the sound and image settings on Xiaomi Mi TV are reset to factory when updating the firmware through OTA – this is a feature of Android TV 11+. Therefore, we recommend saving screenshots of key parameters (how to do this – read the section about backup).

Preparing for the first inclusion: what to do before setting up

Before connecting the TV to the outlet, follow a few simple steps that will save you time and nerves:

• 🔌 Check the package: the box should have a remote (with batteries!), power cable, legs for installation and a brief instruction. TV QLED There's also a cable. HDMI 2.1 for connecting game consoles.
• 📶 Estimate router location: if the TV is far from the router, prepare a Wi-Fi repeater or Powerline adapter - a weak signal will lead to lags in YouTube and Netflix.
• 🔧 Select tools: to mount on the wall will need a drill and level, to adjust the sound – a measuring microphone (you can use the application on your smartphone).

If you plan to use the TV as a PC monitor, pre-prepared HDMI 2.0 cable or later – older versions do not support a resolution of 3840×2160 at 60 Hz. Also check if your video card has an HDMI ARC output – this will allow you to transfer sound from the TV back to the audio system without additional cables.

⚠️ Note: Do not connect the TV to the network 220V Just after delivery in the cold season, let it warm up to room temperature for 2-3 hours, and this will prevent condensation from forming inside the housing, which can cause a short circuit.

Basic setting: Wi-Fi connection, account and region

After the first turn on, the TV will suggest you to choose a language, connect to the network and log in to your account.

1. Region choice: Specify Russia or Ukraine (depending on the country of purchase) to avoid problems with Google Play and YouTube. If you choose China, many services will be blocked.
2. Wi-Fi Connection: Give preference to 5 GHz network – it is less loaded and provides a stable stream for 4K HDR. If the signal is weak, use 2.4 GHz, but be prepared for lags when watching online cinemas.
3. Sign in: Use a Google account, not a Mi Account, which will open access to all Android TV apps. If you don’t have an account, create it in advance on your smartphone.

Once logged in, the TV will offer a firmware update. Don't delay it, the new version corrects audio errors via HDMI ARC and adds support for new codecs (e.g., AV1 for YouTube in high quality). The update will take 10-20 minutes, depending on the speed of the Internet.

The right region (not China) is chosen.

Wi-Fi connection stable (speed >20 Mbps)

Google Account is tied (not Mi Account)

The firmware has been updated to the latest version-->

Image optimization: calibration for movies, games and TV

Factory screen settings on Xiaomi Mi TV often overstate brightness and contrast, which leads to the burning of pixels on the OLED-And this is how you can customize the picture to fit different scenarios:

For accurate calibration, use YouTube test videos (search for "4K HDR calibration test"). Note Gamma's 2.2 optimal value for most rooms. If the picture seems too dark, try 2.0, but not higher, it will lead to loss of detail in the shadows.

⚠️ Attention: On Mi models TV P1 s QLED-Do not use Vivid on a regular basis, this accelerates the burnout of the backlight. Use it only to demonstrate the capabilities of the TV to guests.

Customization of sound: from bass to Dolby Atmos

The built-in speakers of Xiaomi Mi TV (even in the top models) can not compete with external sound systems, but their sound can be significantly improved software.

• 🎵 Standard – Balanced sound for conversation and music.
• 🎬 Movie – amplifies low frequencies for explosion and soundtrack effects.
• 🎮 Play – emphasizes the average frequencies (steps, shots) for better spatial orientation.
• 📺 News – suppresses bass, strengthens the voice of the announcer.

For fine-tuning, go to Settings → Sound → Equalizer. Recommended values for home theater:

• 100 Hz: +3 dB (bass)
• 300 Hz: 0 dB (neutral)
• 1 kHz: +1 dB (voice)
• 3 kHz: -1 dB (remove hissing)
• 10 kHz: +2 dB (air)

If you have a soundbar or AV-receiver HDMI ARC, Make sure you select Passthrough mode in your audio settings, which will allow you to stream Dolby Atmos multichannel audio or DTS:X If the sound is lost when switching sources, update the soundbar and the TV firmware.

💡

To test HDMI ARC, run a video from Dolby Atmos on Netflix (like the movie "1917"). The playback information should show "Dolby Atmos" - if not, check the cable (you need HDMI 2.1 with eARC support).

Smart Features: Google Assistant, Mi Home and Voice Control

Xiaomi Mi TV runs on Android TV, which opens up access to the ecosystem of Google and Xiaomi. Here's how to set up key features:

1.The Google Assistant Voice Assistant

To activate voice control:

1. Press and hold the microphone button on the remote (or say “OK, Google”).
2. Follow the instructions on the screen to link your account.
3. In the assistant settings (Settings → Device → Google Assistant), enable the option “Personal results” – this will allow you to manage your calendar, notes and smart home.

2.Integration with Mi Home

To control Xiaomi smart devices (lamps, sockets, robot vacuum cleaners):

1. Install the Mi Home app from Google Play on your TV.
2. Log in to the same Mi Account as on your smartphone.
3. Add the TV to the list of devices in the app – now it can be controlled via Mi Home on the phone.

To enable the display of smart home widgets on the home screen, go to Settings → Home screen → Widgets and activate "Mi Home." Now you can turn on the lights or run the vacuum cleaner without leaving Netflix.

💡

Voice commands for Xiaomi Mi TV work only in English, Chinese and several European languages, Russian support is limited to basic functions (change volume, switch channels).

Additional settings: for experienced users

If you want to get the most out of the TV, pay attention to these hidden features:

• 🔄 Developer Mode: Activated in Settings → On TV. → Build number (click 7 times) will open access to ADB, debugging USB And you can change the system parameters.
• 🖥️ Unlimited mode: For models with AMOLED-screens (Mi) TV LUX) It allows you to hide the interface. It's included in the settings. → Screen. → Unlimited regime.
• 🎯 Color calibration: In the menu Settings → Screen. → Advanced settings → Choose the color space BT.2020 viewable HDR10+-content.
• 🔌 Fast loading: Disable in Settings → Power supply → Quick start if the TV consumes a lot of power in standby mode (up to 15 watts).

For Kodi or IPTV fans, install the SmartTubeNext app (via ADB or bootloader) that lets you watch YouTube without ads and with background playback.

adb install smarttubenext.apk


adb shell pm grant com.liskovsoft.smarttubenext.androidtv android.permission.WRITE_SECURE_SETTINGS

⚠️ Attention: When in use ADB third-party (APK) Turn off the automatic Google Play Protect update in the security settings, otherwise the TV may block pirated programs.

Backup and reset settings

Before selling a TV or after a major crash, you may need to reset to factory settings.

1. Save settings: Take a picture of key settings (wi-fi networks, sound, image) or write them down in a notebook.
2. Untie accounts: Go to Settings → Accounts and delete Google and Mi Account.
3. Reset: Settings → Device → Reset → Erase all data.
4. Reboot the TV: Once reset, it will automatically restart and prompt you to go through the initial setup.

If the TV doesn’t turn on or is getting stuck on the Mi logo, try the hardware reset:

1. Turn off the TV.
2. Press the Power button on the case (not on the remote!) and connect the power cable.
3. Hold the button for 10-15 seconds until the recovery menu appears.
4. Select "Wipe data/factory reset" using volume buttons and confirm power button.

FAQ: Answers to Frequent Questions