Xiaomi Mi TVs TV Redmi Smart TV They offer flexible options for watching on-air, cable and satellite TV, but the setting of channels often raises questions among users. Unlike smartphones of the same brand, where the interface is intuitive, TVs require a deeper dive into the settings menu — especially when it comes to manually adjusting frequencies or choosing the right signal source.
In this article, we will discuss all the current ways to set up TV channels on Xiaomi TVs (including Mi models). TV 4S, Mi TV Q1/Q2, Redmi Smart TV X and others, taking into account the features of firmware MIUI TV Google TV. You will learn how to perform automatic channel search, manually configure them, save favorite positions and eliminate typical signal problems (DVB-T2), cable operators and satellite dishes.
If you’ve just bought a Xiaomi TV or have to reconfigure channels after you’ve moved or reset your settings, this guide will save you time and avoid common mistakes, starting with hardware preparation and signal source selection.
1. Preparing Xiaomi TV to set up channels
Before you start looking for channels, make sure your Xiaomi TV is properly connected to the source of the signal, which not only affects the number of channels found, but also their quality.
For on-air TV (DVB-T2) You'll need it:
- 📡 Supported antenna DVB-T2 (room-to-door).
- 🔌 F connector cable (if the antenna is not built-in).
- 📍 Proper location of the antenna – preferably the broadcast tower.
For cable TV, check out:
- 🔌 Connecting the cable from the provider to the connector RF IN TV-wise.
- 📄 Operator contract – some channels can be encrypted.
If you are using satellite TV, you will need to:
- 🛰️ Satellite dish with converter (LNB).
- 🔗 A Sat-IN cable from the plate to the TV (or receiver if the plate is connected through it).
- 📡 Satellite data (frequency, symbolic speed, polarization) – can be checked with the provider.
⚠️ Attention: On the TVs Xiaomi Mi TV A2 And a new satellite TV connector might not be available, so you'll need an external satellite receiver with output. HDMI.
After connecting the equipment, turn on the TV and go to Settings → Channels → Signal source. Here, select the connection type:
- antenna (DVB-T/T2) — TV-TV.
- Cable (DVB-C) — cable-TV.
- Satellite (DVB-S/S2) — satellite-broadcasting.
2. Automatic search of TV channels on Xiaomi TV
Autosearch is the easiest way to set up channels if you have a stable signal. Xiaomi TVs support automatic tuning for all types of broadcasts, but the algorithm may vary depending on the model.
To start the search engine:
- Open the Settings menu (button) ⚙️ remote).
- Go to the Channels section → Search engine.
- Select the source of the signal (antenna, cable or satellite).
- Click Start Search and wait for the process to be completed.
Search time depends on the number of channels and the power of the TV's processor. TV Q1E Redmi Smart TV X55 The process takes 3-5 minutes, on older ones (for example, Mi). TV 4A) — 10 minutes.
| Type of broadcasting | Average search time | Number of channels (Russia) | Is the Internet required? |
|---|---|---|---|
| Etheric (DVB-T2) | 3-7 minutes | 20 (multiplexes of RTRS-1 and RTRS-2) | No. |
| Cable (DVB-C) | 5-12 minutes | 50–200 (depending on provider) | No. |
| Satellite (DVB-S2) | 8-15 minutes | 100–500+ | Not, but may be required to EPG) |
If after auto-search some channels are not found or displayed with artifacts, try:
- 🔄 Repeat search – sometimes the signal is unstable.
- 📶 Check antenna/cable connection – weakened contact can cause packet losses.
- 🔧 Update TV software - in new versions of firmware, scan errors are corrected.
Check the connection of the antenna/cable |
Make sure the signal source is selected correctly|
Turn off the VPN (if used) |
Close all applications running in the background-->
Manual Channel Customization: When Auto Search Fails
If automatic search fails or you need to add a specific channel (e.g. regional or paid), use manual settings, which are also useful for satellite TV, where you need to enter precise parameters.
Instructions for manual adjustment:
- Go to Settings → Channels → Manual setting.
- Select the signal type (DVB-T2, DVB-C or DVB-S2).
- Enter the parameters manually (see table below).
- Click Search and wait for the channels to be found.
The parameters for manual input depend on the type of broadcast:
| Parameter | Etheric TV (DVB-T2) | Cable TV (DVB-C) | Satellite TV (DVB-S2) |
|---|---|---|---|
| Frequency (MHz) | 474–858 (depending on multiplex) | Check with your provider (e.g. 314 MHz) | 10750–12750 (depending on the satellite) |
| Symbolic speed | Automobile | 6875 (standard for most providers) | 27500-45,000 (e.g. 27500 for Tricolor) |
| Modulation. | 256-QAM | 256-QAM | 8PSK or QPSK |
| Polarization | — | — | Horizontal (H) or vertical (V) |
For satellite TV, you will additionally need to specify:
- 🛰️ Satellite (e.g. Eutelsat) 36E for "Tricolor" or ABS-2 75E for NTV-Plus").
- 🔍 Transponder: The frequency and symbolic speed of a particular channel packet.
- 🔑 DiSEqC – if you use a switch for multiple plates.
⚠️ Note: On Xiaomi TVs with Google firmware TV (Like Mi. TV Q2) The path to manual settings may be different: Settings → Television and entrances → Channel setting → Additional settings.
If the TV doesn’t save manual settings after the reboot, reset the channel settings to factory settings: → Channels → Resetting settings. This will help resolve conflicts with previous configurations.
Where to get the parameters for manual settings?
4.Tune in. IPTV Xiaomi TV: alternative to traditional TV
If you prefer watching TV over the Internet, Xiaomi TVs are supported by the Internet. IPTV — protocol IP. This does not require an antenna or cable, but requires a stable connection to the network at a speed of 15 Mbps.
How to configure IPTV:
- 📺 Through the built-in app (available on Google models) TV):
Through third-party applications
- SS IPTV — simple-player EPG.
- Lazy IPTV — for playlists with a large number of channels.
- TiviMate is a premium application with advanced features.
Example of playlist IPTV (format M3U):
#EXTM3U
#EXTINF:-1 tvg-id="1.ru" tvg-name="First channel" tvg-logo="https://example.com/1.png,"First channel
http://example.com/stream1
#EXTINF:-1 tvg-id="2.ru" tvg-name="Russia 1" tvg-logo="https://example.com/2.png," Russia 1
http://example.com/stream2For convenience:
- 🔖 Sort channels by category (news, sports, movies).
- 📅 Set up EPG (Electronic transmission program – many playlists support it automatically.
- 🔒 Use it. VPN, If some channels are blocked in your area.
- Save the changes with the OK button.
Additional functions:
- 📁 Channel Grouping – Create folders (e.g., Sport, Kids").
- 🔄 Auto Update – Turn on in the settings so that the TV periodically checks the relevance of the list.
- 📊 View information – click Info on the remote to see the current channel data (frequency, signal quality).
On Google models TV (for example, Xiaomi TV A Pro) Channel management interface integrated into the main menu. To open it, press and hold the Home button on the remote, then select Television. → Channel management.
💡
Update the channel list regularly (once every 1-2 months) as operators may change frequencies or add new multiplexes.
6. Solving problems with channel setup
If the channels are not located, disappeared after updating or are displayed with interference, use this troubleshooting instruction.
Problem 1: The TV doesn't find channels (0 results).
- 🔌 Check the antenna/cable connection – a weakened connector may be the cause.
- 📶 Make sure the signal is strong enough (in the Settings menu) → Channels → The signal status should be above 60%).
- 🔄 Try another type of search (e.g., Fast instead of Full).
- 📡 For satellite TV, check DiSEqC setting and plate angle.
Problem 2: Channels found but not shown (black screen or artifacts)
- 🔧 Update the TV firmware: Settings → On TV. → Updating the system.
- 📶 Check signal quality – if the level is below 40%, an amplifier is required.
- 🔄 Restart the TV (Power button for 10 seconds).
- 🛠️ Reset channel settings: Settings → Channels → Reset.
Problem 3: There is no sound on some channels.
- 🔊 Check the sound settings: Settings → Sound. → Sound format (select Auto).
- 🔄 Switch to another channel and back – sometimes buffer resetting helps.
- 📡 For satellite TV, check the audio track settings (incorrect language may be selected).
Problem 4: The channels are periodically lost.
- 📶 The problem may be from the provider – check the information on his website.
- 🔌 If you use an extension or splitter for an antenna, try connecting the cable directly.
- 🛡️ Turn off energy saving mode: Settings → Energy conservation → Standby mode (select Off).
⚠️ Attention: On the TVs Xiaomi Mi TV P1 and newer at a weak signal can trigger automatic switching to streaming over the Internet (if the channel is available in the Internet). IPTV). You can disable this function in Settings → Channels → Automatic recovery.
What if the TV is stuck looking for channels?
7. Signal optimization: amplifiers, antennas and other accessories
If the signal quality is poor, consider improving reception with additional equipment, especially for on-air and satellite TV, where the signal depends on external factors (weather, distance to the tower).
For on-air TV (DVB-T2):
- 📡 An external antenna, such as a Rolsen RA-10 locus LA-20AN. It is installed on the balcony or roof.
- 🔋 Signal amplifier – connects between the antenna and the TV (e.g, SWA-9009).
- 📶 Active room antenna, for example, 1st Digital LDA-1510 feed-on USB.
For satellite TV:
- 🛰️ Accurately customize the plate - use the DishPointer app (Android/iOS) slope-determiner.
- 🔧 DiSEqC switch – if you have multiple plates (for example, for Tricolor and NTV-Plus").
- 📡 Multifide – mounting for several converters on one plate.
For cable TV:
- 🔌 Amplifier-distributor – if the signal is given to several TV sets (for example, GSS-401).
- 🛠️ Cable replacement – use a 75 ohm coaxial cable.
Before buying accessories, check compatibility with your TV model. For example, some signal amplifiers can interfere with new Xiaomi TVs with latest-generation digital tuners.
💡
If you live in a low signal area, try turning the antenna towards the nearest TV tower.