How to set up a Xiaomi Mi TV TV 4S: Complete guide from connectivity to fine-tuning

Xiaomi Mi TVs TV 4S They gained popularity due to the combination of affordable prices, high quality 4K HDR-screen and powerful Android platform TV. But even with an intuitive interface, the initial setup can raise questions — especially if you’re first to encounter smart TVs. This article will help you get a handle on everything from basic network connectivity to hidden features that the manufacturer doesn’t always advertise.

We will not be limited to standard instructions out of the box. Here you will find practical tips for optimizing images for different types of content, solving typical problems with connecting to Wi-Fi, as well as recommendations for setting up a voice assistant and integrating with the Xiaomi ecosystem.

If you have purchased Mi TV 4S 32, 43, 50 or 55, it doesn't matter. Most of the settings are universal for the entire line, and where there are differences, we'll point them out separately. Ready to start? First of all, get out the remote and make sure the TV is plugged into the outlet, and then we'll take it Step-by-step.

Preparing for the first inclusion: what to do before setting up

Before you press the power button, do a few simple steps that will save you time and eliminate the need to redo the settings later.

Check the package. In the box with the Mi. TV 4S The TV itself, the remote control (with batteries), the stand (if you bought not an option for wall mounting), the power cable, the brief instruction and the warranty card.

• 🔌 Connect the power cable to the TV and the socket. Make sure that the voltage in the network meets the requirements (220V for Russian models).
• 📶 Organise space. Arrange the TV so that the ports on the back are easily accessible, which can be used to connect antennas, consoles or soundbars.
• 🔄 Update your firmware in advance. If you have the ability to connect your TV to the Internet via an Ethernet cable before you first turn on, do so. So you save time downloading updates over Wi-Fi.

Important: Mi models TV 4S 2020-2021 releases may require firmware updates when you first connect to the network, without which some features (such as voice search) will not be available.

First Entry and Basic Configuration: Step-by-step Instructions

When you're done, press the power button on the remote or on the TV, the Mi logo will appear on the screen, and then the initial setup wizard will start, and follow our recommendations to ensure that you don't miss important points.

1. Language selection. Use the arrows on the remote to select Russian. If you don't have the right language, check the region of the TV (more on that below).
2. Connect to the network. Choose your Wi-Fi network from the list. If you don't have a network, make sure the router is on and broadcasting in the 2.4 GHz band (not all Mi models). TV 4S 5GHz support. Enter your password with a virtual keyboard.
3. Software update: If you want to upgrade, you can agree. It takes 5 to 15 minutes depending on the speed of the Internet, and don't turn off the TV when you upgrade, because it can cause the system to crash.
4. Setting up an account. You can skip authorization (Skip button) here, but then you can’t install apps from Google Play and sync settings with other Xiaomi devices.

Once the setup wizard is complete, the TV will suggest you select the source of the signal. If you have connected an antenna or a set-top box, select the appropriate port (HDMI 1/2, AV or DTMB If not, just click Home on the remote to get to the home screen.

Successful Wi-Fi connection|Up-to-date version of the firmware|Correct display of time and date|All ports are working. HDMI|No artifacts on screen-->

Image Customization: How to Get the Perfect Picture

Standard image settings on Mi TV 4S They rarely realize the full potential of the screen, and to get the best quality, you'll have to dig through the menu.

Go to Settings. → Display and sound → Here's a few key options:

• 🎨 Mode: Mode: Movies, Movies, games, Standard, Dynamic Mode overstates brightness and contrast, which quickly tires your eyes.
• 🔍 Brightness and contrast. Optimal values for HDR-content: brightness 45-50, contrast 85-90. SDR (regular TV) 35-40 and 75-80, respectively, are sufficient.
• 🌈 Color temperature. Set warm for comfortable viewing in the evening or standard for daytime.

To fine-tune, go to Additional, where you can turn off motion clear, which adds unnecessary artifacts to movies, or activate Local Dimming to improve black (not available on all models).

Gamer Advice: If you connect to PlayStation or Xbox, activate Game Mode in Settings HDMI-This will reduce the input lag to 10 to 15 milliseconds, which is critical for shooters and racing.

💡

To quickly switch between image modes, assign your favorite mode to the A button on the remote. To do this, press it for 3 seconds in the picture settings menu.

Internet connection and solving Wi-Fi problems

Without a stable Internet connection, Mi TV 4S It loses most of its capabilities: streaming services don't work, apps don't update, voice search becomes useless.

Connection methods:

1. Wi-Fi is the most common option, supported networks 2.4 GHz and 5 GHz (on models from 2022).
2. Ethernet is more reliable than Wi-Fi, especially if the router is far from the TV. The cable is not always included, so check in advance.
3. Mobile hotspot is a temporary solution, suitable for customization, but not for permanent use due to traffic restrictions.

What to do if your TV is not connected to Wi-Fi:

• 🔄 Reboot the router. Turn it off the power for 30 seconds, then turn it back on.
• 📶 Check the range. Some Mi models TV 4S (for example, 4S 32′′ 2019) do not support 5GHz. switch router to 2.4GHz mode or create a separate network for the TV.
• 🔐 Reset network settings on the TV: Settings → The Internet and the Internet → Additionally. → Resetting network settings.
• 🛠️ Update the router's firmware. Outdated software can cause conflicts with modern devices.

⚠️ Note: if the TV is connected to the network, but the Internet is not working, check the settings DNS. Sometimes manual installation helps. DNS from Google (8.8.8.8 and 8.8.4.4) in the Settings menu → The Internet and the Internet → Wi-Fi → Additionally. → Settings IP.

To check the connection speed, go to Settings → The Internet and the Internet → Network speed. Normal values for Full HD-streaming: at least 15 Mbps for 4K HDR You will need 25 Mbps and higher.

Customization of sound: from balance to surround effects

Built-in Mi speakers TV 4S They can't compete with full-fledged acoustic systems, but when you set them up properly, they sound pretty good.

Go to Settings. → Display and sound → Sound. Here are the options available:

• 🔊 Sound mode. You can choose Standard for Talk, Movie for Movie, Music for Concerts. News mode raises the mid-frequency, making the voice of the announcers clearer.
• 🎛️ Manually adjust the frequencies: increase 100 Hz for bass, 1-3 kHz for vocals, 10 kHz for high frequency transparency.
• 🔄 Balance. If the TV is in the corner, move the slider to the far column for a uniform sound.

To improve sound without external acoustics, activate Dolby Audio and DTS Virtual:X (available on models from 2020) these technologies mimic surround sound, creating a presence effect, but they can distort the voice in the news, in which case it is better to turn them off.

For soundbar or receiver owners: use the port HDMI ARC (Audio Return Channel, which allows you to transmit audio from the TV to external acoustics without any additional cables. ARC, Go to Settings. → Display and sound → Sound. → HDMI ARC and turn on the option.

Voice Assistant and Smart Features: How to Use

One of the key Mi chips TV 4S — It's built-in Google Assistant, and it's integrated with the Xiaomi ecosystem, but many people don't know how to use it.

Activation of voice search:

1. Press and hold the microphone button on the remote (if any). On models without a separate button, use the combination Home + Loudness up.
2. Say a command after the beep, such as "Put YouTube on," "Find an Interstellar movie," or "Show the weather for tomorrow."
3. To manage Xiaomi smart devices, say “turn on the light in the living room” (pre-connect the devices in the Mi Home app).

What can you do with your voice:

• 🎬 Content Management: Movie Launch, Streaming Search, Rewind.
• 🌡️ Smart home control: turning on Yeelight lamps, adjusting the temperature on Xiaomi Air Conditioner.
• ⏱️ Quick Actions: Set a Timer, Reminders, Launch a Screensaver.

If the voice assistant does not respond:

• Check your internet connection (voice commands are handled by the cloud service).
• Update your TV firmware and Google app.
• Go to Settings. → The device → Voice input and make sure Google is selected.

⚠️ Attention: on Mi models TV 4S, The voice search system can only work in English, released before 2020. MIUI TV 2.0.15.

Integration with Mi Home: To control smart devices from your TV, follow the following steps:

1. Install the Mi Home app on your smartphone and add all devices to one ecosystem.
2. On the TV, log in to the same Xiaomi account as on your smartphone.
3. Open the Settings. → Devices → Smart home and sync devices.

💡

Voice assistant on Xiaomi Mi TV 4S It only works when you're connected to the Internet. Without the network, only basic commands for controlling the TV (volume, channels) are available).

Application Installation and Alternative Launchers

By default, Mi. TV 4S It's based on PatchWall, which offers content from Xiaomi partners, but many users prefer the classic Android. TV Or third-party launchers. Let's look at both.

Install applications from Google Play:

1. Open the Google Play Store on the main screen.
2. Sign in to your Google account (if you didn’t do so when you set up).
3. Find the app you want (e.g. Netflix, YouTube, Kodi) and install it.

Popular applications for Mi TV 4S:

• 📺 TVirl - an alternative TV-guide for digital television.

Installation of an alternative launcher:

If you don’t like PatchWall, you can install another launcher, for example, ATV Launcher or HalLauncher:

1. Download. APK-launcher USB-accumulator.
2. Connect the flash drive to the TV and open the File Manager.
3. Launch the installation APK, Preliminary permission to install from unknown sources in Settings → Security and limitations.
4. After installation, select a new launcher in Settings → Annexes → Default launcher.

⚠️ Note: some alternative launchers may conflict with Xiaomi system services, which will slow down the interface.

How to remove unnecessary applications:

Unlike smartphones, on Android TV You can't delete pre-installed applications by standard means:

1. Go to Settings → Applications.
2. Select an unneeded app (such as Mi Video or Prime Video).
3. Press Disconnect or Stop.

FAQ: Answers to Frequent Questions