How to set up a Xiaomi Mi TV TV 4S 65 inches: A complete guide from connectivity to fine-tuning

Xiaomi Mi TV 4S 65

Many people mistakenly believe that it is enough to plug a cable into a socket and press the power button. In fact, the right setup includes screen calibration, network configuration, remote control settings, and even power optimization, especially for a model. 4S 65, where 4K-Dolby Vision resolution and support require fine-tuning to unlock potential.

We will not limit ourselves to basic instructions – in this article you will find tips for solving typical problems (for example, why sound can disappear through the sound). HDMI) And you can use the best modes for different scenarios, movies, games, sports, and if you've just unpacked your TV, start with the first section, which is in order.

First Enablement and Basic Setup of Xiaomi Mi TV 4S 65

After unpacking the TV Xiaomi Mi TV 4S 65 Make sure you have everything you need: the TV itself, a stand (if you bought it in the assembly), a remote control with batteries, a power cable and documentation. In some regions, the box may not have a network cable - it will have to be purchased separately (a standard cable is suitable). IEC C7 "eight").

Connect the TV to the outlet and press the power button on the remote or on the back (bottom right).The first time you turn on, the Mi setup wizard will start. TV The system will offer to choose the language - we recommend Russian (Russia), as some translations in other localizations may be incomplete:

• 📶 Wi-Fi Connection: Select your network from the list and enter a password. If the router supports 5GHz, prefer it - this will reduce delays when streaming.
• 📦 Software Update: The system will offer to check for updates – agree, even if it takes 10-15 Up-to-date firmware fixes bugs and adds new features.
• 🔑 Mi Account Link: You can skip it, but without it, Mi Home, cloud services and some applications (for example, Xiaomi Video) will not work).
• 🎯 Screen setting: the system will suggest calibrating the boundaries of the image - make sure that the frame is not cut at the edges.

Once the setup wizard is complete, the TV will restart, and then you can start to make a detailed configuration, and if you're stuck at some point, don't panic. 4S 65 with firmware below V12.1.3 There may be an infinite boot bug during the Wi-Fi connection phase. Solution: Turn off the router for 30 seconds and try again.

⚠️ Note: If the TV does not turn on after connecting to the network, check that the power cable is tightly inserted into the connector DC-IN It's on the back. 4S 65 It's inconveniently located - sometimes the connector doesn't reach the end.

Connecting external devices: HDMI, USB and sound systems

One of the key advantages of Xiaomi Mi TV 4S 65 is a rich set of connectors. You'll find it on the back:

• 📺 3 port HDMI (supportive ARC/eARC sound-system).
• 💾 2 ports USB (single USB 3.0 blue for fast data transfer).
• 🔊 Optical output (S/PDIF) soundbar.
• 🌐 Ethernet port (LAN) wired.
• 📡 Entrance (DVB-T2/C/S2) TV-TV.

To connect a console (such as the Xiaomi Mi Box), a game console, or a sound bar, follow these tips:

1. Use the cables. HDMI High speed (high speed or premium certified), especially for high speed 4K@60Hz.
2. For sound systems with ARC connect to the port HDMI 3 (ARC) — This will allow you to transmit sound from the TV to the soundbar without additional cables.
3. If you connect to PlayStation 5 Xbox Series X, in the console settings, turn on the mode 4K@60Hz RGB color-render.

Frequent problem when connecting through HDMI — No image or sound. Check it out:

• 🔄 Restart both devices (TV and signal source).
• 🔧 In the TV menu go to Settings → Devices and accessories → HDMI-Mode and select Extended for bandwidth 2.0.
• 🔊 If there's no sound through HDMI, In the TV sound settings, select HDMI ARC or external speakers.

⚠️ Attention: When connected NVIDIA Shield or other Android consoles via HDMI There may be a conflict with the built-in Google Play Services.Solution: in the TV settings, disable Auto-Update apps to prevent crashes.

Enable the game mode in the settings of the TV|Permits to be established 4K@60Hz console-setting|Connect the console to the port HDMI 1 or 2|Turn on HDR in the settings of the console and TV|Disable motion processing (Motion Smoothing) to reduce input lag-->

Image customization: calibration for movies, games and TV

Xiaomi Mi TV TV 4S 65 supports 4K UHD, HDR10, HLG And Dolby Vision, but by default, the image is often over-bright and contrast-free.

Go to Settings. → Display and sound → Picture. There are several preset modes available:

• 🎬 Movie: Optimized for movies with warm color temperature and low brightness.
• 🎮 Game: Reduces Input Lag, but Can Make Pictures Dim.
• 🏟 Sport: Increases brightness and saturation for dynamic scenes.
• 👁 Custom: for manual settings.

For most users, the user mode is optimal with the following parameters (for rooms with moderate lighting):

• 🌡 Color temperature: Warm (or Standard if warm appears yellowish).
• 🔆 Brightness: 45-50 (for HDR adjust automatically).
• 🖼 Contrast: 85-90 (Higher – Details are lost in the shadows).
• 🎨 Saturation: 50-55 (factory 60 frequently overstated).
• 🔄 Sharpness: 0 (any value above adds artifacts).

For gamers, the input lag parameter is critical. In Game mode, it is about 10 ms, but you can also reduce it:

1. Turn off all post-processing: Settings → Display and sound → Additionally. → Traffic processing → Off..
2. Set the Mode. HDMI into PC (port-setting).
3. In games, turn on Game or Performance mode (if available).

💡

To watch movies in Dolby Vision, select Motion Smoothing and Noise Reduction mode, which spoils the author’s image.

Sound optimization: from built-in speakers to soundbars

Built-in speakers Xiaomi Mi TV 4S 65 (2 × 12.5 W) sounds good for your class, but for a full immersion in movies or music, you better connect external acoustics. → Display and sound → Sound.

Basic recommendations for built-in speakers:

• 🔊 Sound mode: Film for cinema, Music for tracks, Voice for news.
• 🎛 Equalizer: raise 100 Hz 2-3 division for bass, reduce 2-4 kHz to reduce hissing.
• 🔄 Balance: Check that both speakers work the same way (sometimes the left channel is quieter due to factory defects).

To connect external acoustics:

1. Through HDMI ARC: Connect the soundbar to the port HDMI 3 and turn on ARC This will allow you to transmit sound from the TV to the speakers without additional cables.
2. Through Optical Output: Use a Cable TOSLINK to connect the receiver or active speakers. In the settings, select Digital Output (S/PDIF).
3. Through Bluetooth: in the Settings menu → Devices and accessories → Bluetooth, connect your wireless headphones or speakers, and the sound delay is ~100 ms.

If the sound is lost when switching sources or after turning on the TV:

• 🔧 Restart the TV (hold the power button for 10 seconds).
• 🔊 In the sound settings, reset the parameters to factory (Reset the sound settings).
• 🔄 If you use HDMI ARC, Check that the soundbar is on mode. HDMI IN.

💡

If you connect the soundbar through HDMI ARC, And the sound still goes through the built-in speakers, check that the settings of the TV in the section Sound → Sound output selected HDMI ARC, Not TV speakers.

Setting up Smart TV: application installation and management

Xiaomi Mi TV 4S 65 is running on Android TV 9.0 (in new firmware - Google) TV), It's a big-screen solution that allows you to access thousands of apps through the Google Play Store, but not all programs are optimized for the big screen, so it's important to know how to install and manage them properly.

Basic steps after first inclusion:

1. Update Google Play Services and Android System WebView to the Play Market – this will eliminate most of the lags.
2. Install mandatory applications: 🎬 Kodi or VLC locally. 📺 YouTube, Netflix, Disney+ stream. 🎮 Steam Link or Moonlight for streaming games from PC.

Mi Account

Control of the TV is possible not only from the remote, but also from the smartphone:

• 📱 Install the Mi Remote app (available for Android and iOS).
• 🖱 Connect a wireless mouse or keyboard via Bluetooth (useful for text input).
• 🎮 Use a gamepad (e.g., Xiaomi Game Controller) for gaming.

Frequent problems with Smart TV and their decisions:

• 🐢 Lags in the interface: clear the cache in Settings → Annexes → Application management.
• 🚫 App not installed: check the Google account region (should match the TV region).
• 🔒 Advertising Blocking: C Settings → Confidentiality Disable Personalized Advertising.

⚠️ Attention: On firmware older V12.1.5 Google Assistant may not work due to lack of certification. Update the software or use an alternative - Alice from Yandex (installed as a separate application).

Network settings: Wi-Fi, Ethernet and remote management

A stable Internet connection is critical for streaming 4K HDR-Content, online games and updates. Xiaomi Mi TV 4S 65 supports Wi-Fi 5 (802.11ac) 100 Mbps wired connection (largely, gigabit Ethernet is not available here).

Optimal network settings:

• 📶 Wi-Fi: Use 5GHz band for lower latency. If signal is weak, switch to 2.4GHz or use Mesh system.
• 🌐 Ethernet: If the router is nearby, the wired connection will give a more stable speed for the router. 4K.
• 🔒 DNS: Change the loading speed of the content DNS at 1.1.1.1 (Cloudflare) or 8.8.8.8 (Google).

How to change DNS Xiaomi Mi TV 4S 65:

1. Go to Settings. → The Internet and the Internet → Wi-Fi (or Ethernet).
2. Click on your network name → Additional → IP settings.
3. Select Static. IP and enter the desired DNS-server.

For remote control of the TV (for example, turn on the local network):

• 📱 Enable Wake-on-LAN in Settings → The Internet and the Internet → Additionally.
• 🖥 Use apps like Yatse or Unified Remote to manage from your PC/smartphone.
• 🔌 Make sure that the TV and the control device are on the same network.

💡

For streaming. 4K-Internet speed should be at least 25 Mbps when connecting via Wi-Fi, place the router no further than 5 meters from the TV or use a signal repeater.

Additional features: child control mode, energy saving and voice search

Xiaomi Mi TV 4S The 65 has several useful features that often go unnoticed, such as child control, which allows you to limit viewing time and block unwanted content.

How to set up child control:

1. Go to Settings. → Accounts and security → Child control.
2. Install. PIN-code (remember it!).
3. Set up the restrictions: ⏰ Viewing time (for example, 2 hours per day). 🔞 Blocking applications (YouTube, browser, etc.). 📺 Restriction on rating (6)+, 12+, 18+).

To save electricity:

• 💡 Enable Energy Saving Mode in Settings → Screen and sound → Energy conservation.
• ⏱ Set a sleep timer (Settings) → System system → Sleep timer).
• 🔄 Turn off Auto-Update apps in the background.

Voice search and control:

• 🎤 There is a button on the remote with a microphone – press it and make a request (for example, “Put on Netflix").
• 📱 Alternative: Voice commands via Google Assistant on a smartphone (if the TV and phone are on the same network).
• 🔊 Supported commands: "Log up volume", "Open YouTube", "What is the weather forecast today?".

If voice search doesn’t work:

• 🔧 Check that the settings are enabled by Google Assistant (Settings) → Devices and accessories → Voice assistant).
• 📶 Make sure your TV is connected to the internet (voice commands are handled by the cloud).
• 🔄 Restart the TV if the microphone does not respond to pressing.

💡

To quickly find movies or voice shows, say, "Find 2020 comedies," or "Enable Channel One Nature Show." Voice search works even if you don't know the exact title.

FAQ: Frequent questions about Xiaomi Mi TV 4S 65