How to set up the remote Rostelecom on the Xiaomi TV

Modern digital set-top boxes from providers often feature universal remotes that can control not only the Set-Top Box itself, but also the basic functions of the TV. For owners of Xiaomi TVs running on the Android TV platform, the ability to reduce the number of remote controls in their hands is especially relevant.

The process of synchronizing equipment does not require a deep knowledge of electronics or complex software. All the necessary actions are performed directly through the combination of buttons on the remote control. However, given the variety of models of Mi TVs and different versions of remotes from the provider, the user may need a trial and error method to select the correct code.

In this guide, we will take a look at all the interfaces available, how to activate training mode, what manufacturer codes should be entered first, and what to do if standard methods don’t work. Properly configuring an infrared port (IR port) will ensure that you can use the multimedia system comfortably without having to search for a second remote.

Preparation of equipment for interface

Before you start the setup procedure, you need to make sure that all devices are in good condition and ready to go. First of all, check the power cells in the Rostelecom remote control. Weak battery charge can lead to unstable signal transmission, which will greatly complicate the process of entering codes or learning.

It is also important to ensure direct visibility between the remote’s infrared port and the receiver on the Xiaomi TV. The distance between the devices during setup should not exceed 10-15 centimeters. Make sure that there are no foreign objects in the signal path, and the IR receiver itself is not closed with decorative elements or protective film.

⚠️ Warning: During setup, don't use the flash of your smartphone camera to check the signal unless you're sure of the type of emitter.Some modern remotes can use Bluetooth or Wi-Fi Direct for primary communication, but the TV's learning mode runs strictly through the IR port.

Turn on Xiaomi TV and Rostelecom console. The TV should be in the image display mode (not necessarily from the console, you can just start the Smart TV) so that you can visually monitor the volume changes and the response to on/off commands. This is critical to verify the success of each step.

Automatic Configurement through Code Search

The most common method is manually entering the manufacturer's code or automatic brute force. Rostelecom remotes, especially models of recent years of release, contain in memory the codebases for most popular brands, including Xiaomi, Redmi and MI. First, you need to transfer the remote to programming mode.

Press and hold the OK button (or OK + 1 combination depending on the remote model) for 3-5 seconds. The indicator on the remote should light up or blink, signaling the transition to settings mode. After that, you will need to enter a digital code corresponding to your TV.

Xiaomi TVs are often suited to codes intended for other manufacturers using similar arrays or control boards. Try entering the following combinations by checking the response of the TV after each input:

• 🔢 0030 - often used for basic Mi models TV.
• 🔢 Code 10178 is a universal code for many Android devices TV device.
• 🔢 0060 is an alternative code for the Redmi Smart series. TV.
• 🔢 0000 is the default code for many Chinese OEM-producer.

If the indicator flashed several times after entering the code, try pressing the volume button. If the TV responds, the code is correct, otherwise repeat the procedure with a different numerical value from the list or use the auto-search function if it is supported by your remote model.

Training mode: copying commands from the native remote

If automatic code selection fails, the most reliable way is to learn (Learning Mode), in which the remote "remembers" signals sent by the native remote from the Xiaomi TV, which guarantees 100% compatibility, because it copies exactly the signal that your particular TV understands.

To activate the training mode, you usually need to press the combination of the TV and OK buttons simultaneously for 3-5 seconds until the indicator lights up with constant light. After that, the remote is ready to receive signals. You need to place both remotes (head to head) 2-3 cm from each other.

The learning process is phased in for each function:

• 📺 Press the training button on the Rostelecom remote (for example, the volume button), the indicator will start flashing.
• 📺 Press the appropriate button on Xiaomi’s native remote (e.g., “Loudness” +").
• 📺 The indicator on the remote Rostelecom quickly blinks 3 times, confirming the recording of the team.

Repeat this procedure for all necessary buttons: on/off, volume control, signal source selection (Source/Input) And then you can navigate the menu. After you've finished, you can save the settings, which is usually done by clicking a button. TV or waiting for the remote to leave programming mode on its own.

⚠️ Attention: When training the remote, make sure that there is no bright sunlight or powerful lamps between the IR ports. Infrared radiation from external sources can "muffle" the signal, and the Rostelecom remote control will not be able to read the command.

Setting up via Bluetooth (for voice remotes)

Xiaomi's new set-top boxes and TVs often support Bluetooth control. If you have a modern Rostelecom remote with a microphone button, it can support wireless pairing. However, it's worth noting that most Bluetooth remotes are used for voice input, and the main commands are duplicated through an IR port.

To check for Bluetooth connectivity, go to the settings of the console Rostelecom. Find Settings → Devices and Accessories → Add Accessory. If the remote supports this protocol, it can be defined as an input device. But controlling the Xiaomi TV (its volume and power) will still require infrared training, since Bluetooth remotes providers rarely know how to send commands to a third-party TV by “blue tooth”.

It is critical to understand that even if the remote is connected via Bluetooth to the console, the TV control functions (volume, on/off) in 99% of cases work exclusively through the IR port, requiring pre-configuration of codes or training.

However, having a Bluetooth connection extends the functionality of the console itself, allowing voice search on a Xiaomi TV through the microphone of the Rostelecom remote.This is convenient for navigating the Android TV interface, but does not replace the need to configure the IR part to control the screen.

Compatibility table and manufacturer codes

Below is a table with the most common codes for different TV series. OEM-manufacturers (e.g. Vestel or TCL for panel assembly, codes of these brands may also be suitable.

When using codes from a spreadsheet, if the first option didn't work, don't rush to the next one. Try re-entering the code, making sure you press the buttons quickly and clearly. Sometimes the remote requires double-entering the same combination to confirm.

Solution: The remote does not control the TV

Despite the correctness of the instructions, users may find themselves in a situation where the remote control Rostelecom stops responding or is unstable. One common cause is the conflict of infrared signals. If the Xiaomi TV installed applications to control the smartphone as a remote, they can intercept priority or cause interference.

The problem may also be sticking buttons or oxidizing contacts inside the remote, disassembling the remote (neatly unscrewing the screws under the battery compartment) and wiping the contact pads with alcohol, and the purity of the contacts is the key to stable signal transmission.

• 🔋 Replace batteries: Even if the indicator lights up, the voltage may not be enough for a powerful IR emitter.
• 📡 IR port check: point the remote control to the smartphone camera (through which you can see the IR radiation) and press a button. You should see the purple glow on the screen.
• 🔄 Resetting: Remove the batteries from the remote for 1 minute, then insert back and repeat the setup procedure from scratch.

If the Xiaomi TV responds to commands but with a delay, try to increase the distance between devices while in use. Sometimes a close location (less than 1 meter) leads to the receiver’s lighting too powerful a signal.

FAQ: Frequently Asked Questions