The integration of the provider’s equipment with modern Smart TVs is often a question for users, especially when it comes to popular brands like Xiaomi. Many subscribers face a situation when the standard Rostelecom remote stops controlling the TV after updating the firmware or replacing the device, due to differences in the protocols of infrared signal transmission and the features of the Android TV operating system, on which many models are based.
The synchronization process requires sequential execution of actions, since there is no universal code for all models. You will either have to enter a specific digital combination or start the button learning mode. It is important to understand that the success of the configuration depends on the generation of your console (W242, W244 or older models) and the version of the remote.
In this guide, we will look at all the current ways to pair equipment: we will look at methods for automatic code selection, manual adjustment through the engineering menu and solving typical problems with an infrared port. The key is to accurately observe the timing when pressing buttons during programming.
Preparation of equipment and compatibility check
Before you start setting up, make sure your equipment is physically fit and ready to go.Rostelecom remotes (often labeled RT or W-series) operate in infrared, which requires a line of sight between the transmitter and receiver on the TV. Make sure that the remote has fresh batteries installed, as low voltage can lead to an intermittent signal that the TV will ignore.
Turn on the Xiaomi TV and make sure it responds to the native remote. If the regular remote does not work, check its performance through the smartphone camera: point the IR emitter into the lens and press any button — the screen should be visible flashing purple glow, this will eliminate problems with the remote itself.
Older RT-90 devices may not support the button learning feature available in the more modern versions of W242 and W244. If you have an older remote without a TV button, you may need to replace the hardware in the provider’s office.
☑️ Checking before setting up
Automatic setting of the remote through the codes of manufacturers
The fastest way to get a Rostelecom remote to control a Xiaomi TV is to use factory codes. The remote already has thousands of combinations sewn into its memory for various brands. TV Often suitable codes reserved for Chinese OEM-manufacturer or universal.
The process of entering the code is as follows: press and hold the TV button (or the combination of TV + OK depending on the remote model) for 3-5 seconds until the indicator lights up twice. Then enter a four-digit code. If the code fits, the TV will turn off. After that, press the OK button to save the result.
Below is a table with the most likely codes for Xiaomi TVs and compatible models:
| Code. | Compatibility | Probability of success |
|---|---|---|
| 0256 | Xiaomi, Mi TV | Tall. |
| 10178 | Xiaomi, Redmi | Medium |
| 0030 | Universal (Chinese brands) | Medium |
| 0178 | Common Android TV code | Low. |
If none of the codes worked, try the brute force method. Type the code, check the TV's response (e.g. volume control). If there is no reaction, repeat the procedure with the next code on the list. This method can take time, but it is effective when the exact model of the TV is unknown.
💡
If the code fits but not all buttons work, try resetting the remote settings (usually a 9-8-1 combination or holding TV+OK until double blinking) and re-entering the code.
Manual training of remote buttons by Rostelecom
In cases where automatic codes are not working or are not working correctly, the Learning Mode is used, which allows Rostelecom’s remote to “copy” a signal from your native Xiaomi remote, especially for new TV models that have not yet been coded into the provider’s databases.
To start the training mode, press the TV and OK buttons at the same time (or a special Setup button, if any) until the indicator lights up twice and starts burning constantly. This means that the remote is ready for the signal Kenya. Bring the native Xiaomi remote to the Rostelecom remote control for a distance of 2-3 centimeters, strictly “face to face”.
Press the button you want to program on your home remote (like Volume+). The indicator on Rostelecom's remote must blink quickly to confirm the signal capture. Then press the corresponding button on the provider's remote to assign it this function. Repeat the procedure for all the necessary buttons: turn on, volume and select the signal source.
⚠️ Attention: During button training, avoid bright sunlight or direct lights directed at the IR receivers. Extraneous infrared radiation can distort the signal, and the Rostelecom remote will not be able to correctly count the command.
Once you have all the buttons programmed, press the TV to exit the training mode. The indicator must go out. Now your remote control must control the TV completely. If the result is unsatisfactory, you can repeat the procedure by clearing the remote memory.
Set up via the Xiaomi TV menu (Android TV)
Some Xiaomi TVs with Android TV make it easier to set up via the software menu. Although the Rostelecom remote is physically customizable, the TV can help calibrate or confirm commands. Go to the TV settings by selecting Settings (cogs) in the upper right corner.
Go to Preferences → Remote and Accessories (or Remote & Accessories) where you can see connected devices. Although the Rostelecom remote is not a Bluetooth device (in most cases), this menu sometimes includes the Universal Remote or PULT LEARNING feature if your TV is equipped with an IR blaster.
If your Rostelecom remote supports Bluetooth, the process may be different, so you need to put the remote in pairing mode (usually holding the Home and Back buttons or Mi and Back buttons) and find it in the list of available Bluetooth devices on your TV. However, the classic W242 remotes work exclusively through the IR port.
Problem Solving: The remote does not respond or is partially working
It's not uncommon for Xiaomi TVs to be tuned but not responsive or delayed. First, check if the IR receiver is covered by decorative elements or a sound bar. Distance also plays a role: try bringing the remote closer, less than 1 meter away, to check.
A common cause of failure is the “sticking” of the learning process. If you program the remote several times, there may be conflict commands in its memory. In this case, it is recommended to perform a full reset. For most models, Rostelecom does this by simultaneously pressing the TV and OK buttons until the indicator flashes twice, then you need to enter the code 9-8-1 (or 9-8-2 for some versions).
It is also worth checking whether the TV itself blocks the IR port. In Xiaomi settings (System or General) you sometimes find the option to turn off the external IR receiver if Bluetooth remotes are given priority.
What to do if only one button is on?
Alternative management and conclusion
If standard methods fail, alternative controls can be considered: Xiaomi TV owners can use the Google Home or Mi Remote app on their smartphone to control the TV over Wi-Fi. This allows Rostelecom to completely abandon the physical remote for basic functions, leaving it only for switching console channels.
Another option is the use of USB-adapters for controlling the prefix Rostelecom from the keyboard or mouse, if your model supports the console HID-It makes control a more convenient process, similar to working on a computer.
In conclusion, setting up the remote by Rostelecom to a Xiaomi TV is a solvable task, but it requires careful attention. The main thing is to correctly define the model of the remote and consistently follow the steps of entering code or learning. Don't be afraid to experiment with codes from the table, since regional batches of TVs can have different IR protocols.
💡
The success of the setup depends on 90% of the correctness of the code entry and the absence of interference in the IR channel during the learning of the buttons.