Buying a new gadget is always accompanied by a pleasant anticipation, but immediately there is a practical question about its initial configuration. Xiaomi Redmi 9 is a popular model that requires the correct initial setting of parameters for stable operation. The initial launch process can seem difficult due to the abundance of system requests and offers from the manufacturer.
The Redmi 9’s configuration avoids many problems in the future, such as fast battery drain or memory overflow. In this article, we’ll take a closer look at each step from the insertion. SIM-maps before fine-tuning the interface MIUI. Following the instructions will help you to unlock the full potential of the device.
It's worth noting that the Android operating system in the MIUI shell has its own features that distinguish it from pure Android, and understanding these nuances is critical to the comfort of using a smartphone in everyday life.
Preparation of the device and first launch
Before power is turned on, you need to provide the device with a source of energy. Connect the smartphone to the original charger, since the battery could have run out during storage in the warehouse. The charging indicator should catch fire immediately after connecting the cable to the Micro-USB connector.
It is important to check the integrity of the case and screen for chipped or cracked before turning on. If you find defects, you should immediately contact the point of sale before activating the warranty. Mechanical damage sustained before the first switching on can cause denial of service.
After charging, press and hold the side power button on the right side of the case. The screen should catch fire and you will see the Mi logo, indicating that the operating system has started booting. The first run can take several minutes, as the system conducts an initial component check.
⚠️ Warning: Do not attempt to turn on the device if it was brought from the cold into a warm room.A sharp temperature drop can cause condensation inside the housing, which will lead to a short circuit.
💡
Let the smartphone lie at room temperature for about 30-40 minutes after the street before turning it on or charging.
The system boots up with a language-selected welcome screen, and Redmi 9 is ready for further user configuration.
Installation of SIM-card and connection to the network
To access the Internet and make calls, you need to install a SIM card. The card tray is on the bottom end of the device, next to the charging connector. Use a special clip from the kit or a thin needle to extract the tray by pressing into the hole.
The Redmi 9 supports two nano-SIM cards and a microSD card at the same time. Pay attention to the installation diagram drawn on the tray itself to avoid confusing contacts. Incorrect installation can lead to the phone not seeing the card.
Once you have installed the cards and turned on the phone, the system will suggest connecting to a Wi-Fi network, which is an important step for activating your account and downloading updates, and if you don't have a home network, you can use mobile Internet, but this can lead to traffic consumption.
- 📡 Click on your network name in the list of available connections.
- 🔑 Enter the password from the Wi-Fi router, observing the register of letters.
- ✅ Click the “Connect” button and wait for the network icon to appear in the curtain.
A stable internet connection is essential for Google services to work and the device to activate. Without this step, further customization of the Xiaomi Redmi 9 will be impossible or limited.
Google and Mi Accounts: Why You Need Them
It will require you to log in to your Google account, which is necessary for the Play Market app store to run, to sync contacts and restore backups, and if you already have Gmail, just type in your username and password.
In parallel, the system will suggest creating or logging into Mi Account, the manufacturer’s own ecosystem that allows you to find the device when you lose, synchronize notes, voice recorder and gallery between Xiaomi devices, and it is not recommended to ignore this step, as it provides additional security.
When creating passwords, use complex character combinations to protect your personal data from being hacked. Two-factor authentication significantly improves your account security. Keep your recovery codes in a safe place.
⚠️ Note: Remember the Mi Account password, without which you can't unlock your phone after resetting or flashing, because theft protection will work.
☑️ Account setting
Once you have successfully logged in, the system will suggest recovering data from the cloud, and if you switch from another Android smartphone, this step will be as smooth and automatic as possible.
Security and biometrics setting
One of the key features of a modern smartphone is access protection.The Redmi 9 features a fingerprint scanner located on the back of the camera.Tunes biometrics takes less than a minute and greatly speeds up unlocking.
And there's also a face unlock feature available, which is less secure than a print, but it's quite enough for everyday use, and it creates a digital mold of your face when you first run it.
Do not forget to install a pattern lock or PIN-This is a backup method of access that you'll need if the biometric sensors don't work.
| Type of protection | Location. | Speed. | Reliability |
|---|---|---|---|
| Print. | Behind. | Tall. | Tall. |
| Face ID | Front camera. | Medium | Medium |
| PIN-code | Screen. | Low. | Tall. |
| Password. | Screen. | Low. | Maximum |
💡
The combination of security techniques (fingerprint + password) ensures maximum security of your data on Redmi 9.
In the Settings → Passwords and security section, you can set up automatic application locking, which will hide the contents of banking applications or gallery from prying eyes.
Transferring data from an old phone
To migrate data from the previous device, the best way to use the built-in Mi Mover app is pre-installed on all Xiaomi smartphones and allows you to transfer contacts, messages, photos and applications without using the Internet.
The data transfer process takes place over a direct Wi-Fi connection between devices, which ensures high copy speeds. You don't have to waste mobile traffic or search for a computer.
Run the app on both phones. On the new device, select "I'm the recipient" and on the old one, "I'm the sender." Scan. QR-The code that appears on the Redmi 9 screen.
- 📂 Select data types for transfer (contacts, photos, applications).
- 🚀 Click “Send” and wait for the process to be completed.
- 🔄 Do not turn off your phone screens while transferring files.
What should I do if the transmission is interrupted?
Once the transfer is complete, check for all important files in the respective folders. Some applications may require re-authorization.
Optimization of the MIUI system and interface
The MIUI shell offers a variety of personalization tools, and first of all, you should remove any ads in system applications if they bother you, and this is done by disabling the recommendations in the settings of each application.
You can also configure navigation gestures, instead of three buttons at the bottom of the screen, you can use swipes, which makes it easier to control on large diagonals. You can switch from the Settings → Desktop menu.
To save battery power, activate the dark theme and power saving mode.Redmi 9 screen has a dark theme. IPS-A matrix that reads well but consumes energy, and automatic brightness can help extend the operating time.
⚠️ Warning: Do not install third-party programs to "accelerate" or "cool" the processor. MIUI They do it better, and third-party software often contains ads.
Regular system updates via Settings → About the phone ensures security patches are received. The manufacturer periodically releases patches that improve the stability of the Redmi 9.
💡
Enable Advanced Memory in your settings if available, allowing you to use part of the storage as RAM for faster heavy applications.