How to set up a remote on a Xiaomi TV: full instructions with photos and tips

Xiaomi's remote control (DU) from a TV is not just a button to switch channels. It's a multifunctional device with voice control, fast keys for streaming services, and even a built-in gyroscope for gaming. But what if the remote stops working, doesn't sync with the TV or requires initial setup? In this article, we'll look at all the ways to connect, calibrate and troubleshoot, from basic to advanced.

Feature of Xiaomi remotes (including models for Mi) TV 4/5/6 series, Redmi TV And Mi Box, using a Bluetooth connection instead of a traditional IR port, which means that synchronization requires not only direct visibility, but also the right sequence of actions. If you have bought a new TV or replaced the remote, our instructions will help you avoid common mistakes and save time.

Xiaomi Remote Types: What Do You Have?

Before you set up a remote, define a model of the remote, and what functions and methods of connectivity are available depend on it. Xiaomi has three main types of remote control:

• 📺 Standard Bluetooth remote – comes with most Mi TV redmi TV. It has a microphone for voice control, buttons for Netflix/Prime Video and touch panel.
• 🎮 Gaming remote - comes with Mi TV 6 OLED and some Mi Box models, supplemented with analog sticks and triggers for games.
• ⚡ Universal IR remote – rarely found in newer models, but can be used to control other devices (air conditioners, audio systems).

To find out the exact model, look at the back of the remote – there is an article (for example, the article is indicated, MDZ-26-AA for the standard Mi DU TV If there is no label, check the settings of the TV: Settings → About the programme → Accessories.

Initial setting of the new remote

If you have just unpacked a TV or bought a remote, it needs to be synchronized with the TV, which takes less than a minute, but requires precise steps:

1. Turn on the TV with the power button on the case (if the remote is not already connected).
2. Put the remote at a distance of 10-20 cm from the TV.
3. Press the buttons at the same time. ⊞ Menu (or) ⚙ Settings) and ← Back for 5-7 seconds until the indicator blinks.
4. On the TV screen, a notification will appear: "New remote is detected. Connect?" - confirm the choice.

If sync is not started automatically, go to the TV menu: Settings → Bluetooth and devices → Add an accessory and select the remote from the list. TV 6 and newer may require input PIN-code - default is 0000 or 1234.

Make sure the TV is on the network.

Check the battery charge in the remote

Remove old paired devices (if the remote has been used before)

Place the remote near the TV (no more than 50 cm)-->

Battery replacement and remote reset

If the remote control is no longer responsive to the press, the first reason is the batteries that are discharged. AAA, In the game - Li-ion battery (charged through the USB-C). To replace batteries:

1. Turn the remote and move the compartment cover in the direction of the arrow.
2. Remove old batteries and insert new ones while observing polarity (+ and −).
3. Close the lid before you click.

If the replacement does not help, reset the remote:

1. Remove the batteries for 10 seconds.
2. Press and hold the button. ⊞ Menu 15 seconds (even without batteries).
3. Insert the batteries back and repeat the synchronization.

Configuring additional functions

Xiaomi remotes support not only basic commands, but also advanced features that can be customized for yourself.

Voice control

To activate the voice assistant (works with Google Assistant or XiaoAI):

1. Hold the button. 🎤 Microphone 2 seconds.
2. After the beep, say a command (for example, “Turn on Netflix” or “Lip up the volume”).

If the microphone is not responding, check the settings: → Voice assistant → Allow access to the microphone.

2. Quick keys for services

There are buttons on the remote for Netflix, Prime Video, YouTube and other services, if they don't work:

• 🔄 Update apps via Google Play (for Android) TV).
• 🔧 Go to Settings. → Annexes → Special access → Quick keys and assign services manually.

3.Gyroscope for games

Gaming consoles (for example, for Mi) TV 6 OLED) They support tilt control:

1. Run a game that supports a gyroscope (such as Asphalt 9).
2. Press the button. 🎮 Game on the remote.
3. Follow the instructions on the screen for calibration.

Solving common problems

Even after you set it up properly, the remote can malfunction.-5 problems and solutions:

1.The remote does not sync with the TV.

Causes and means of elimination:

• 🔋 Replace discharged batteries with new ones (even if they are “nearly new").
• 📶 Bluetooth interference – turn off other devices (earphones, smartphones) and repeat pairing.
• 🔄 TV malfunction - restart the TV (hold the power button for 10 seconds).
• 🚫 The remote is already paired with another device - reset (see section above).

2.The buttons are running with a delay

This is a typical problem for Bluetooth remotes.

• 📱 Update the TV firmware (Settings) → About the programme → Update of the PO).
• 🔄 Reconnect the remote (remove it in Settings) → Bluetooth and add again).
• 🛠️ If the delay is only in games, turn on Game Mode in TV settings.

3. Voice commands are not working

Check it out.

• 🎤 Microphone not silenced (some remotes have a physical switch).
• 🌐 TV connected to the Internet (voice assistant requires cloud processing).
• 🔊 The correct language model is selected in the settings (for example, Russian (Russia)).

💡

If the remote starts to glitches after a fall, check the integrity of the case - sometimes the contacts of the buttons go away. Carefully disassemble the remote (if it is not on warranty) and make sure that all the plumes are connected.

Set up a universal remote for Xiaomi TV

If you have lost your original remote or want to run Xiaomi TV A universal remote control system (such as Samsung or Philips) will require manual code adjustment. Most universal remotes support Xiaomi through protocols. NEC or RC5.

Instructions for setting:

1. Turn on the TV with a button on the body.
2. On the universal remote, press the SET (or CODE SEARCH) before the indicator flashes.
3. Enter the code for Xiaomi (see table below) or run an automatic search.
4. Press. OK And check the buttons.

If none of the code fits, try learning buttons (if your universal remote supports this feature).

1. Place the original and universal remotes "face to face" at a distance of 2-3 cm.
2. On the universal remote, select the training mode (usually) LEARN).
3. Press the button on the original remote that you want to copy.
4. Save the setting on the universal SD.

💡

Universal remotes do not support voice control and gyroscope – these features are only available in the original Xiaomi DUs.

Update of remote firmware

Yes, Xiaomi remotes are getting updates too! They improve connection stability, add support for new services and fix bugs.

1. Connect the remote to the TV (it should be paired).
2. Go to Settings. → About the programme → Accessories update.
3. If an update is available, click Download and Install.
4. Do not turn off the remote control or turn off the TV during the process (it takes 2-5 minutes).

After updating the remote firmware to version 1.4.5 and above, the option “Energy Saving” appears in the menu – its inclusion increases the battery life by 30%, but can add a delay of 0.5-1 seconds when pressing buttons.

Alternative ways to manage Xiaomi TV

If the remote is broken or lost, you can still control the TV.

1. Mi Remote app (for smartphone)

Download the official app from Google Play or App Store:

• 📱 Connect your phone and TV to the same Wi-Fi network.
• 🔍 In the app, select Add Device → Television → Xiaomi.
• 📺 Follow the instructions on the screen to pair.

The app supports all the features of the original remote, including voice input.

2. Control from keyboard or mouse

If your Xiaomi TV port USB Or Bluetooth, you can plug in:

• 🖱️ Wireless mouse – convenient for web surfing.
• ⌨️ Keyboard – Hot keys are supported (e.g. Win) + → louden).

3. buttons on the TV body

On the back or side panel of Xiaomi TV There are physical buttons:

• 🔘 JOYSTICK (Joystick - for navigation on the menu.
• 🔄 Source – Switching signal sources.
• 📺 Power - on/off switching.

4. Voice commands via Google Assistant

If the TV is connected to the same network as Google Home or Alice, you can control the voice:

• 🎤 Say, OK Google, turn on Netflix on your TV".
• 🔊 Or, "Alice, turn up the volume on Xiaomi." TV 50%".

💡

If you lose a remote often, attach a Bluetooth tracker keychain (such as the Xiaomi Mi Smart Tag) to it, and it can be found through the Mi Home app.

FAQ: Frequent questions about Xiaomi TV remotes