Setup remote to the TV Xiaomi Mi: from synchronization to repair

Xiaomi Mi TVs are known for their combination of affordable price and advanced features, but even with such devices, users face basic problems — for example, when the remote control (DU) stops responding to commands or requires initial configuration. Unlike traditional TVs, where the synchronization of the remote is reduced to replacing batteries, smart TVs from Xiaomi can require additional manipulations, from manually entering codes to resetting settings through the service menu.

This article will help you understand how to connect the remote to the TV Mi TV (including the Mi models TV 4S, Mi TV 5, Mi TV Q1 And others, what to do if the remote is not defined by the system, and how to program the universal remote from other brands, we will look at both standard methods (via the TV menu) and hidden functions that are not written about in the official instructions. Special attention will be paid to typical errors, due to which the setting is broken, and we will give a checklist for the diagnosis of malfunctions.

1. Types of remotes for Xiaomi Mi TV: which one?

Before you start setting up, it's important to determine what type of remote you're working with, which is what the synchronization methods are available and what problems you might have. TV subdivided:

• 🔘 The original Bluetooth remote comes bundled with a TV. It runs on Bluetooth Low Energy protocol (BLE), It does not require direct view from TV. Supports voice control (button with microphone) and has a touchpad.
• 📶 IR panel (infrared) – found in older models (e.g. Mi) TV 3) or as a backup option, requires direct-of-sight with a TV, operates at 38 kHz.
• 🔄 Universal remote - from third-party manufacturers (Huayu, One For All, Xiaomi Mi Universal Remote) Requires manual programming through code entry.

To find out the type of remote, look at the bottom of it: if there is a Bluetooth inscription or the Mi Remote logo – it is the original one. BLE-If you only see the IR emitter (a small transparent window) it's an infrared model. Universal remotes usually have a list of supported brands on the back.

⚠️ Note: Xiaomi Mi Box remotes are incompatible with Mi TVs TV — They use different communication protocols. Don't try to sync them, because it could cause the TV's Bluetooth module to crash.

2. Connecting the original Bluetooth remote

Original Xiaomi Mi remotes TV sync with the TV automatically when you first turn on, but sometimes the connection breaks (for example, after updating the firmware or resetting settings:

1. Make sure that the remote has working batteries (alkaline type is recommended). AAA).
2. Turn on the TV with the power button on the case (if the remote does not respond).
3. Press and hold the Menu buttons. + OK on the remote simultaneously for 5-7 seconds, until the indicator begins to flash blue.
4. On the TV, go to Settings → Devices → Bluetooth → Add the device.
5. In the list of available devices, select Mi Remote Controller (or similar name).
6. Confirm the pairing on the TV and remote (if required).

If the remote is not displayed in the list of Bluetooth devices:

• 🔋 Check the battery charge (even new batteries can be discharged).
• 📱 Reboot the TV: Settings → On TV. → Reboot.
• 🔄 Reset the remote settings: pinch Menu + Back to 10 seconds.
• 📡 Make sure there are no interference sources nearby (Wi-Fi routers, microwaves).

If after resetting the remote still does not connect, try to update the firmware of the TV to the latest version - in old versions of the software (below). MIUI TV 3.0) there are Bluetooth-connected bugs.

Setting up the IR panel (infrared)

Infrared remotes for Xiaomi Mi TV They're less common, but they're even easier to set up than Bluetooth models, and the rule of thumb is that there should be no obstruction between the remote and the TV (glass, walls) and the distance should not exceed 8 meters.

To program the IR remote:

1. Turn on the TV with a button on the body.
2. Point the remote to the IR receiver of the TV (usually located on the right or bottom of the screen).
3. Press the Menu buttons. + OK 3 seconds until the indicator flashes.
4. Enter the code for Xiaomi (see table below) using digital buttons.
5. If the TV reacts (for example, the channel changes), press OK preserve.

If none of the code worked, try auto-search:

1. Press Menu + OK before the indicator flashes.
2. Press. 9-9-1 (Auto search code for most universal remotes).
3. Press it. CH+ or CH-, until the TV reacts.
4. Save the settings with the OK button.

4. Programming of the universal remote

Universal remotes (for example, Xiaomi Mi Universal Remote or models from Huayu) support Xiaomi Mi TV, But you need to manually adjust it, and you need a device code, which you can find in the remote manual or in the table below.

General configuration algorithm:

1. Turn on the TV with a button on the body.
2. On the universal remote, press the button. TV (or SET) flashing.
3. Enter the code for Xiaomi (see table).
4. Check the power buttons, Volume, CH+.
5. If the remote does not respond, repeat the procedure with a different code.

If none of the code fits, try remote learning (if the function is supported):

1. Place the original Xiaomi remote and the universal “face to face” at a distance of 2-3 cm.
2. On the universal remote, press. LEARN (or SET) flashingly.
3. Press the button you want to program (e.g. Power).
4. On the original remote, press the same button – the universal remote should save the signal.
5. Repeat for all the buttons you need.

💡

If the universal remote does not save the settings after turning off, replace the batteries with lithium (for example, CR2032) — They hold the charge longer and are better suited for memory devices.

5. Solving typical remote control problems

Even after setting up the Xiaomi Mi remote correctly TV They can malfunction. Let's look at some of the most common problems and how to fix them:

• 🔋 Remote unresponsive: Check the batteries (even if they are new - could have been discharged during storage); wipe the contacts of the batteries in the remote with alcohol; Reboot the TV (Settings) → On TV. → Reboot).
• 📡 The Bluetooth remote is connected but shuts down after a few minutes: Update the TV firmware to the latest version. Remove the remote from the Bluetooth list and reconnect. Check if there are any other Bluetooth devices (earbuds, smartphones) that are causing interference.
• 🔄 The IR remote only works from close range: Replace the batteries with alkaline batteries (Duracell or Energizer); wipe the IR emitter and the receiver on the TV with a dry cloth; check if the receiver is covered with a decorative panel or furniture.
• 🔊 Individual buttons do not work (such as volume control): Reset the remote settings (click Menu). + If the remote is universal, reconfigure it with another code. Check if the remote is in conflict with other devices (e.g. air conditioning).

⚠️ Warning: If your Bluetooth remote stopped working after updating your TV firmware, try rolling back the software to the previous version. MIUI TV 4.x There are bugs with Bluetooth drivers that Xiaomi fixes only in the following patches.

💡

If the remote stops working after falling or getting moisture, don't try to disassemble it - 90% of the time it damages the board. TV 5 — MDZ-26-DC).

6. Alternative ways to control the TV

If the remote control is not configured or it is broken, you can control Xiaomi Mi TV alternatively:

• 📱 Mi Remote appendix (Android/iOS): Download the app from Google Play or the App Store. Connect your phone and TV to the same Wi-Fi network. → Television → Xiaomi.Follow the on-screen instructions for pairing.

To manage through ADB You need to start debugging first. USB in the settings of the TV (Settings) → On TV. → Software version – press 7 times on the line with the version, then return to Settings → Additionally. → Debugging by USB).

7.Repair and replacement of the remote

If the remote is physically damaged (not responsive to pressing, cracked body, traces of oxidation), you can try to repair or replace it.

Self-repair

The repairs will require:

• Screwdriver. T5 (remote-disassembly).
• Isopropyl alcohol (to clean contacts).
• Multimeter (to check batteries and tracks).

Step-by-step:

1. Carefully disassemble the remote, tucking the latches with a plastic card.
2. Check the integrity of the tracks on the board (if damaged - seal).
3. Clean the contacts of batteries and buttons with alcohol.
4. Check the rubber button pads – if they are worn out, replace them (can be cut from the old keyboard).
5. Collect the remote and check the performance.

Replacement with a new remote

If the repair didn't work, buy a new remote.Original remotes for Xiaomi Mi TV find:

• 🛒 On the official website of Xiaomi (section "Accessories").
• 🌍 On AliExpress (art search. MDZ-26-DC for Mi TV 5).
• 🏬 In electronics stores (for example, Svyaznoy, M. Video).

⚠️ Warning: When buying a remote on AliExpress, check reviews - often sellers send fakes that don't sync with the TV.The original remote must have a Xiaomi hologram on the back.

FAQ: Frequent questions about Xiaomi Mi remotes TV