How to set up channels on a Xiaomi TV: a complete guide with photos and videos

Set up channels on Xiaomi TVs is a process that seems easy only at first glance. Even experienced users sometimes face problems, from the lack of a signal to the loss of individual channels after updating the firmware. In this article, we will discuss all the ways of setting up, from automatic search to manual sorting, and also tell you how to avoid the typical errors when connecting an antenna or cable TV.

The Mi TV (including Mi TV 4S, Mi TV 5 Pro, Mi TV Q2, and others) features PatchWall’s own shell, which sometimes hides the standard Android TV settings. We’ll show you where to look for the right menus, how to distinguish digital channels (DVB-T2) from analog channels, and what to do if the TV doesn’t find any channels.

Preparing for setup: what to check before searching for channels

Before you start searching for channels, make sure that all external devices are connected correctly, and errors at this stage cause the TV to either not find the channels at all or to detect them incompletely.

• 📡 Type of antenna: room antenna is only suitable for strong signal (for example, in large cities), and for country houses will require street with amplifier.
• 🔌 Cable: Use a 75 Ohm coaxial cable – other options can interfere.
• 🔄 Splitters: If multiple TVs are connected to a single cable, check if the splitter supports frequency. DVB-T2 (usually indicated on the hull).
• 📶 The antenna direction: for digital TV antenna should be focused on the nearest tower (to find its location on the website RTRS).

If you’re connecting cable TV (from a provider like Rostelecom or MTS), make sure that the contract specifies support for digital channels. Some tariffs still only provide analog signal, which Xiaomi Mi TV may not support (depending on the model).

⚠️ Note: If you just bought a TV and are turning it on for the first time, first perform the initial setting (language selection, Wi-Fi connection.

Automatic channel search on Xiaomi Mi TV

This is the easiest way, which is 90% of the time, and it's the TV that can determine the type of signal (digital or analog) and scan all the frequencies available. TV 4A, Mi TV 5, Mi TV P1 newer:

1. Press the Settings button on the remote.
2. Go to Settings → Channels → Channels Configure.
3. Select Automatic Search.
4. Specify the signal source: Antenna for terrestrial TV (DVB-T2). Cable for cable TV.

Start

After searching, the TV will suggest saving the channels found, and if the list is unnecessary (for example, radio channels or test broadcasts), they can be removed later manually.

Are the main channels found (First, Russia)-1, NTV, etc.)|

Are there no artifacts (frozen images, sound interference)|

Are channel names correctly displayed (not in hieroglyphics)|

Are the settings still in place after the TV reboot?-->

If the automatic search didn't work, try resetting the channels to the factory: Settings → Channels → Reset. Sometimes this helps with the tuner failure.

Manual Channel Configuration: When and How to Use

Manual mode is needed in three cases:

1. The TV doesn’t find the individual channels that should be in your area.
2. You want to add a channel with a non-standard frequency (for example, local broadcasting).
3. Automatic search finds channels, but they don’t work (no image or sound).

For manual adjustment:

1. Go to Settings → Channels → Manual setting.
2. Select the signal type: DVB-T2 (digital) or Analog.
3. Enter the multiplex frequency (e.g. 546 MHz for the first multiplex in Moscow). Current frequencies for your region can be found on the CETV website.
4. Specify the flow rate (usually Auto).
5. Press Search.

If a channel is found but not reproduced, check:

• 🔍 Signal level (should be at least 60-70%). If less, try reorienting the antenna.
• 📡 Signal quality (ideally 100%) If it jumps, interference from other devices (Wi-Fi router, microwave) is possible).

⚠️ Note: On some Xiaomi Mi models TV (Like Mi. TV 4X 2019) manual mode may not be able to input frequency. In this case, update the TV firmware to the latest version.

IPTV setup on Xiaomi Mi TV: an alternative to terrestrial TV

If you don't have on-air or cable TV, you can use IPTV, which is the Internet TV, without having to have an antenna, just a stable network connection (preferably via cable, because Wi-Fi can slow down).

How to configure IPTV:

1. Through the built-in Live TV app: Open Apps → Live TV. Select IPTV and enter the playlist URL (provided by the provider). Example URL: http://provider.tv/playlist.m3u.
2. Through third-party apps: Install SS IPTV or Lazy IPTV from Google Play. Download the playlist in.m3u or.xspf. In some cases, you will need to enter a login / password from the provider.

Advantages of IPTV:

• 🌍 Access to channels from other regions (for example, Moscow channels in St. Petersburg).
• 🔄 Possibility of rewinding the air (if supported by the provider).
• 📱 Synchronization with mobile devices (you can watch TV on your smartphone).

💡

If IPTV is slowing down, try to reduce the bitrate in the app settings or connect the TV to the router via an Ethernet cable. Also check if the antivirus on the router is blocking streaming video.

Sorting and managing channels: how to remove, move or add to your favorites

After searching for channels, their list often requires editing: removing duplicates, sorting by topic or adding to favorites. TV It's done this way:

• 📝 Channel Removal: Open the Channel List (button) TV Take the channel and press it. OK. In the context menu, select Delete.
• 🔀 Channel Moving: In the channel list, press Menu (three dots or gears). Select Edit. Drag the channel to the desired position using the Up/Down buttons.
• ⭐ Add to your favorites: Select the channel and press OK. Select Add to Favorites. Featured channels will be displayed in a separate tab.

Important: Some firmware resets the list of favorite channels after updating. To avoid this, export the settings to the file: Settings → Channels → Export / Import.

If you want to hide the channels for children, use parental control:

1. Go to Settings → Security → Parental Controls.
2. Install. PIN-code.
3. In the list of channels, mark the ones that need to be blocked.

Tablets: TV cannot find channels or they don’t work

If you don't have the channels on after you set up, don't be quick to blame the TV, because 80 percent of the time, the problem is external factors, and let's look at the typical situations and the ways that we can solve them.

If none of these methods worked, try resetting the TV to factory settings:

Settings → Device → Reset → Reset all settings

This procedure will delete all data, including installed apps and accounts, so use it as a last resort.

💡

Before reset, write down or take a picture of the current channel settings - after resetting, they will have to be reconfigured.

Firmware Update: Why It Is Important for a Sustainable TV

Many channel setup problems are solved by updating the firmware. The manufacturer regularly releases patches that fix tuner errors, add support for new broadcast standards and improve stability.

1. Go to Settings → About TV → System Update.
2. Click Check for updates.
3. If a new version is available, download and install it.

If the TV does not find updates via the Internet, you can install firmware manually:

1. Download the latest version from the official Xiaomi website (select your model).
2. Copy the.zip file to a flash drive (formatted in FAT32).
3. Connect the flash drive to the TV and select Update via USB.

⚠️ Warning: Do not turn off the TV during the update, it can lead to a blink (software breakage). If the process is stalled, wait 20 to 30 minutes. If it does not work, contact the service center.

After updating the firmware, it is recommended to repeat the search for channels, as new versions of the software can work better with the signal.

FAQ: Answers to Frequent Questions