Adjusting the antenna on the Xiaomi TV: from connecting to finding channels

Xiaomi TVs are not just affordable smart TV hard-wired MIUI TV, But also devices that require the right setup to be able to receive steady on-air or cable TV, and many users have problems with the signal going missing, the channels getting jammed, and the automatic search being completely unavailable. The reason most often lies in the wrong connection of the antenna, incorrect settings or incompatibility of equipment.

In this article, we will understand how to connect an antenna to Xiaomi Mi TV (including the Mi models TV 4A/4S/5/5X/Q1/Q2), You can set up a manual and automatic channel search, and you can also solve typical problems, from a weak signal to a lack of sound on some channels (DVB-T2) and features of setting up in different regions of Russia.

If you’ve just bought a Xiaomi TV or moved into a new home where the signal is different, this guide will help you avoid common mistakes and save time experimenting with settings.

1. Which antenna to choose for Xiaomi TV: types and recommendations

Before you connect the antenna, you need to make sure it is compatible with your TV and broadcast format. - Xiaomi Mi TV standardize:

• 📡 DVB-T2 — Digital TV (20 channels in Russia, free of charge).
• 📺 DVB-C — cable TV (requires connection to the provider).
• 🛰️ DVB-S/S2 — Satellite TV (you need a plate and receiver, but Xiaomi) TV Not all models are directly supported).

For most users, the first two options are relevant: If you live in a city with digital TV, you can use a room antenna or a street antenna. DVB-T2. For cable TV, you will need a contract with a provider (for example, Rostelecom or MTS) and a special cable.

⚠️ Note: If you live in an apartment building, check if your entrance is connected to a collective antenna, in which case you may not need a custom antenna - just connect to the connector in the wall (usually marked as a "multiple" antenna). TV or ANT).

2. Connecting antenna to Xiaomi TV: step-by-step

When you select an antenna, you need to connect it correctly, and it's a simple process, but there are nuances that affect the quality of the signal.

Here's what you're gonna need:

• 🔌 The antenna itself (room or street).
• 📶 Cable RG-6 (If the antenna is not complete with the TV).
• 🔄 F-connectors (for cable compression, if not installed).
• ⚡ Power supply (if the antenna is active).

Now we're plugging in:

1. If the antenna is street, fix it on the balcony or roof, pointing towards the nearest TV tower (you can find out the direction on the RTRS website).
2. Connect the cable to the antenna, making sure that the F connector is tightly twisted (otherwise there will be a loss of signal).
3. Put the other end of the cable in the connector ANT IN on the back of a Xiaomi TV.
4. If the antenna is active, connect the power supply to the socket (usually it is inserted between the cable and the TV).

⚠️ Note: Do not use extension cords for antenna cable - each additional meter degrades the signal. If the cable is not enough, buy a new desired length with already compressed connectors.

Make sure the antenna is properly pointed (for street models)

Check the density of the connection of F-connectors

Connect the power supply (for active antennas)

Select the right signal source on the TV (TV or ANT)

-->

3. Set up channels on Xiaomi TV: manual and automatic search

When the antenna is connected, you have to configure the channels. TV This is done through the Settings menu. → Channels. Let's look at both: automatic and manual.

Automatic search (recommended for most users):

1. On the remote, press the Settings button (cogs) → select Channels.
2. Go to Channel Settings → Search engine.
3. Select the source of the signal: 📶 On-air TV (DVB-T/T2) — digitally. 📺 Cable TV (DVB-C) — If connected to the provider.

Start

Manual search (if the automatic channel is not found):

1. Settings menu → Channels select Manual Search.
2. Specify the frequency of multiplex (for example, for RTRS)-1 in Moscow 546 You can find out the frequencies for your region on the RTRS website.
3. Set up the parameters: 🔄 Bandwidth: 8 MHz (standard for Russia). 📡 Modulation: 256 QAM (for DVB-T2).

If there's a signal, the TV will find the channels.

⚠️ Note: If after an automatic search, some channels are not shown (black screen or no signal), try resetting the channel settings (Settings) → Channels → Reset) and repeat the search. Sometimes it also helps to disable the "Rapid Start" function in the TV power settings.

💡

If the TV doesn’t find channels, try connecting the antenna to another device (like a console or an old TV).If there’s no signal there, the problem is with the antenna or cable, not with the Xiaomi settings. TV.

4.Signal Problem Solving: What to Do If Channels Don't Show

Even after you set it up properly, you can have problems, and here are the most common ways to solve them:

The critical mistake: if the TV Xiaomi Mi TV 4A/4S after updating the firmware stopped seeing the antenna, try rolling back the software to the previous version through USB-The backup instructions are on the forum. 4PDA model-themed.

Another common case is the conflict with HDMI-If you have a console (e.g. Xiaomi Mi Box) or a game console connected to your TV, try turning them off while you set up channels. HDMI-CEC It interferes with the correct search of air channels.

5. Optimizing settings for better reception

To improve signal quality and avoid problems in the future, adjust the following options:

• 🔄 Update the TV firmware: Go to Settings → On TV. → Update: New software often fixes TV bugs.
• 📶 Set up the region: in Settings → Channels → Select Russia (if not by default) is important for finding multiplexes correctly.
• 🔇 Disable Unnecessary Channels: You Can Hide Unused Channels in the Channel Management Menu to Simplify Navigation.
• 🔌 Use a network filter: if the antenna is active, connect its power supply through the filter - this will protect against voltage surges.

It's also worth checking your parental controls settings - sometimes channels aren't shown due to age restrictions. → Security → Parental controls and reset restrictions if they are set.

💡

If you live in a low signal area, try using an antenna with an amplifier and filter. LTE (Locus L 032.11 or Rexant RX-402). It cuts off interference from cell towers, which often interfere with reception. DVB-T2.

6.Cable TV setup (DVB-C) Xiaomi TV

If you are connected to a cable TV provider (e.g. Rostelecom or Dom.ru), the setup process will be different.

• 📡 Frequency (e.g. 306 MHz).
• 🔢 Symbolic speed (e.g. 6875 kSimv/s).
• 🔐 Modulation (usually 256) QAM).

Instructions:

1. Connect the provider's cable to the ANT IN connector on the TV.
2. Go to Settings → Channels → Channel Configuration → Cable TV (DVB-C).
3. Select Manual Search and enter the options provided by the provider.
4. Run the scan. If the data is correct, the TV will find a packet of channels.

⚠️ Note: Some providers use a binding MAC-If the channels are not activated, please let the provider know. MAC-The address of your TV (you can find it in Settings) → On TV. → State of the network).

7. Alternative ways to watch TV on Xiaomi without antenna

If setting up an antenna seems too complicated or the signal in your region is too weak, there are alternatives:

• 📱 Smart TV-Apps: install Wink, Tricolor TV or MTS TV from MIUI TV App Store. Many channels are available for free or by subscription.
• 🖥️ IPTV: Connect a playlist from a provider (e.g. Beeline) TV) via SS IPTV.
• 🎮 Preview: Xiaomi Mi Box or Apple TV TV-based.
• 🌍 YouTube and streaming: many channels (e.g. Channel One, Russia 1) are broadcast live on YouTube.

The advantage of these methods is that they do not depend on the antenna and signal quality. However, to work steadily, you will need high-speed Internet (from 20 Mbit / s for Full). HD).

💡

If you choose IPTV, Look at legal providers (e.g. MTS TV or Wink) and free playlists from the Internet are often unstable and may contain viruses.

FAQ: Frequent questions about setting up an antenna on Xiaomi TV