Voice remote for Xiaomi TV: how to use, configure and control TV voice

Xiaomi's voice remote is not just an accessory, it's a complete tool for easy control of the TV, which can switch channels, search for movies, adjust volume, and even control a smart home — all without pressing buttons, just with your voice. However, many users have difficulty connecting first or don't know all the features of the device.

In this article, we will discuss how to properly configure the voice remote for Mi TVs. TV, Redmi Smart TV and other models of the brand, which commands are supported in Russian, and how to solve typical problems (for example, if the remote does not respond to voice or connects with errors.

We'll focus on how to adjust your voice recognition, which will determine how well your TV understands your commands, and for those who like automation, we'll show you how to integrate your voice remote with Google Assistant or Alice for advanced control.

1. Compatibility: Which Xiaomi TVs support voice remotes

Not all Xiaomi models TV They work with voice controls. Here are the key criteria for compatibility:

• 📺 The Mi series TV 4S/4A/4X (2019 year and later) – support remotes with a microphone, but require software updates to MIUI TV 3.0+.
• 🎯 Redmi Smart TV X and Redmi. TV A – Full voice control support, including PatchWall commands.
• 🔥 Mi TV Q1/Q2 mi TV Master – premium models with an extended set of voice commands (including managing IoT devices).
• ⚠️ Mi TV 3S older – do not support voice remotes due to outdated hardware.

To know exactly if your TV is right, check the model in the settings: go to Settings → On TV. → If there are letters in the title S/A/X/Q Or the word Master, most likely the voice remote will work.

It's also important to consider the firmware region.TVs for the Chinese market (CN-version) may not support Russian in voice control, in which case you will need to reflash the device to the global version (Global/EEA).

⚠️ Note: If your TV is purchased in China and does not recognize Russian speech, do not try to update the software through a standard menu - this may block access to voice functions.

2. Connecting the voice remote to the Xiaomi TV: step-by-step instructions

The connection process takes no more than 5 minutes, but requires precise steps.

1. Turn on the TV and make sure it’s connected to the internet (via Wi-Fi or cable).
2. Insert the batteries into the remote (usually included). There is a Pair (or Sync) button on the back of the remote, press and hold it for 3-5 seconds until the indicator starts flashing.
3. On the TV, go to Settings. → Devices → Bluetooth and remotes → Add the remote.
4. Select your remote from the list (usually displayed as Mi Remote Voice or Xiaomi Voice Remote).
5. Confirm the pairing on the TV and wait for the message "Remote connected".

If the remote is not displayed in the list of devices:

• 🔋 Check the battery charge (the indicator on the remote should be green when pressing any button).
• 📶 Make sure your TV is connected to the internet (voice commands require cloud processing).
• 🔄 Reboot the TV: Press the Power button on the case for 10 seconds.

Once you've successfully connected, check the microphone: press and hold the Voice Search button (with the microphone icon) and say a command, such as, "Turn Channel One on." If the TV responds, the setup was successful.

Setting up speech recognition: how to make the TV understand you the first time

A common problem with users is that the TV doesn't recognize commands or reacts with a delay, and this is due to the settings of the microphone, the language, and the network connection.

3.1 Choice of language and region

By default, the voice remote can be configured in Chinese or English, to switch to Russian:

1. Go to Settings. → Language and region → Voice assistant.
2. Choose Russian (Russian) or Russian.
3. Save the settings and restart the TV.

Microphone calibration

To improve recognition, perform calibration:

1. Open the Settings. → Devices → Voice remote → Microphone calibration.
2. Follow the instructions on the screen: Say a few phrases to adjust the sensitivity.
3. Avoid noisy rooms during calibration.

Optimization of the network

Voice commands are handled by Xiaomi’s cloud servers, so it’s important to:

• 🌐 Use a stable connection to Wi-Fi (speed not lower than 5 Mbit / s).
• 🔌 Avoid mobile internet connection (possible delays).
• 🔒 Shut down. VPN — It can block access to the recognition servers.

💡

If the TV doesn’t recognize commands well, try speaking more clearly and closer to the microphone (from 20 to 30 cm away).

4. Complete list of voice commands for Xiaomi TV Russian

Xiaomi's voice remote supports more than 100 commands, but not all of them are documented. We've put together a current list, divided by categories:

Important: Russian teams only work in the selected region "Russia" in the settings of the TV. VPN or a firmware TV for another region, voice control may be switched off.

To control a smart home through the voice remote, you need:

1. Connect your TV and remote to one Mi Account.
2. Install the Mi Home app on your smartphone and add devices (lamps, sockets, cameras).
3. In the settings of the TV, activate the option "Manage smart home" in the voice assistant section.

Typical problems and their solutions

Even after you set it up properly, users are going to have some errors, and we're going to look at the most common ones.

5.1 The remote does not connect to the TV

Causes and solutions:

• 🔋 Replace them with new batteries (alkaline batteries are recommended).
• 📡 Interference from other devices – disable nearby Bluetooth headsets or speakers.
• 🔄 Failure in firmware – update the TV software to the latest version in Settings → Update of the PO.

5.2 Television does not respond to voice commands

Check the following:

• 🎤 Microphone is silenced – press the voice search button and wait for the sound signal.
• 🌍 Wrong language – switch the region to “Russia” in the settings.
• 🚫 Blocking Parental Controls – Turn off restrictions in Settings → Security.

Commands shall be executed with delay

This is related to the processing of requests on Xiaomi servers.

• 📶 Connect your TV to the network via Ethernet instead of Wi-Fi.
• 🔄 Restart your router – sometimes changing your Wi-Fi channel to 5GHz helps.
• 🛠️ Reset network settings: Settings → Network → Reset the settings.

⚠️ Note: If after updating the firmware voice control stopped working, try to roll back the software to the previous version. To do this, download the archive with the firmware from the official Xiaomi website and install it through Settings → Update of the PO → Local Update.

6. Advanced Features: Integration with Google Assistant and Alice

Xiaomi’s voice remote can be used not only to control the TV, but also to interact with other voice assistants, opening up additional scenarios:

6.1 Connection to Google Assistant

To control your TV through Google Assistant (such as from your phone or Google Nest column):

1. Install the Google Home app from the Mi App Store on your TV.
2. In the Google Home app on your smartphone, add the TV as a new device.
3. Say the command: OK, Google, turn on Xiaomi. TV".

6.2. Management through Alice (Yandex)

To work with Alice:

1. Connect the TV to your Yandex account through the Yandex app for Xiaomi TV (available on the Mi App Store).
2. Activate the Xiaomi skill TV" in the application Yandex on a smartphone.
3. Now you can use the commands: "Alice, turn on the TV in the kitchen."

Advantages of integration:

• 🎙️ Control from any device – even if the remote is lost, you can use a smartphone.
• 🔗 Automation scenarios – for example, turning on the TV when you return home (via geolocation).
• 📱 Voice input from the lock screen – no need to unlock the phone for commands.

💡

Integration with Google Assistant or Alice requires that the TV and smartphone be connected to the same Wi-Fi network. Also make sure that the TV settings allow remote access (Settings). → Devices → Remote control).

7. Alternative ways of voice control without remote control

If you don’t have a voice remote, but you have a Xiaomi TV with a microphone (built-in or through the camera), you can use other methods:

7.1 Voice search via the console from the Mi Box

The remote from the Mi Box S or Mi Box 4 is compatible with some Xiaomi models TV. For connection:

1. Turn on Bluetooth on the TV.
2. Press Pair on the remote from Mi Box and select it from the list of devices.
3. Use the Google Assistant button for voice commands.

7.2 Control via smartphone

The Mi Remote app (available for Android and iOS) allows you to:

• 🎤 Use the phone microphone for commands (Voice search function").
• 📱 Duplicate the functions of the remote on the smartphone screen.
• 🔗 Control your TV over a local network (without the Internet).

To activate voice control via Mi Remote:

1. Connect your phone and TV to the same Wi-Fi network.
2. Open the app, select your TV from the list.
3. Click on the microphone icon in the top menu and say the command.

8. Frequently Asked Questions (FAQ)