How to find and set an alarm clock on Xiaomi Redmi 9T: way

You just bought a Xiaomi Redmi. 9T You can't find where the alarm clock is hiding, or the desktop icon is missing, and now you wake up late? Don't worry, this is a problem that many newcomers to the ecosystem know. MIUI. The fact is that the manufacturer often changes the location of standard functions depending on the firmware version, and on Redmi. 9T The alarm clock may not be hidden where you are used to seeing it.

In this article, we'll not only show you where the alarm clock is on your smartphone, but we'll also look at all the ways you can run it, from the standard Watch app to voice commands, how to add a widget to the home screen, set up a repeat signal, and even return a missing icon, and if you accidentally delete the app, we'll show you how to restore it without flashing it.

Feature of Redmi 9T It can be used to install one of several versions of the shell. MIUI (12 to 14), and the menu looks a little different, but don't worry, our instructions are universal and they'll work for any firmware.

1. Standard seat: Clock appendix

The most obvious way to find an alarm clock is through Xiaomi’s proprietary Watch app, which is pre-installed on all Redmi smartphones and is usually located on the home screen or in the app menu.

1. Open the app menu (swipe up from the bottom of the screen).
2. Find the icon of the clock (usually a dial with hour and minute hands on a blue or white background).
3. Slip the icon to open the app.
4. In the bottom panel, select the Alarming Tab (bell icon).

If the icon is not visible, try to search the system:

• 🔍 Swipe down from the top edge of the screen to open the notification bar.
• 📱 In the search bar (magnifying glass in the upper right corner) enter “Clock».
• 🛎️ The system will show the application - tap on it.

⚠️ Attention: On some firmware MIUI 13/14 The watch app can be called Clock (if the system's language is English) or hidden in a Google folder. Check all the folders on the home screen!

When you open the Alarm tab, you'll see a list of all the signals that have been created.

1. Press the + (plus) button in the lower right corner.
2. Set a time, select the days of repetition (if necessary).
3. Press Save – the alarm is activated automatically.

💡

If the alarm doesn't work, check if the phone is in Do Not Disturb mode (the crescent icon in the notification curtain) and this mode turns off all sounds, including alarm clock signals.

2. Quick access through the notification panel

Not everyone knows, but on Xiaomi Redmi. 9T You can turn on the alarm right out of the notification curtain without opening the Watch app. It's convenient when you need to set the alarm for tomorrow:

1. Swipe down from the top edge of the screen to open the notification bar.
2. Swipe down again to turn the full panel around.
3. Find the alarm bell icon among the quick settings. If it's not there, tap the pencil icon (Edit) and add it to the active elements.
4. Slap on the alarm icon - a quick setup window will open.

In this window you can:

• 🕒 Set time for a one-time alarm clock.
• 🔄 Select the days of repetition (MN-T, daily, etc.).
• 🔔 Change the melody of the signal (stick by the name of the current melody).
• ⏰ Set a delayed alarm clock (for example, after 10 minutes).

The advantage of this method is that it works even if the Watch app doesn't open for some reason, but keep in mind that you can only set one alarm through the notification panel, and you'll have to use a standard app for several signals.

3. The alarm clock widget on the main screen

If you use an alarm clock a lot, it makes sense to add a widget to the home screen, which saves you time and you don't have to open the app every time. 9T:

1. Press and hold your finger on the empty spot of the main screen.
2. In the menu that appears, select Widgets.
3. Scroll through the list to the Clock (or Clock) section.
4. Select the alarm widget (usually it is square with the image of a bell).
5. Drag it to the main screen and place it in a convenient location.

Now you will have on the screen will display:

• 🕐 Current time of the nearest alarm clock.
• 🔕 On/off button (tap on widget to change status).
• ➕ The button to add a new alarm clock (when pressed, the Clock app will open).

⚠️ Attention: On some firmware MIUI The alarm widget may not display the current signal time, but only its status (on/off). To see the exact time, tap the videotape - it will redirect you to the Watch app.

If the widget suddenly disappeared from the screen, check:

• 📱 Have you ever removed it by accident (long press). → Delete).
• 🔄 Have not reset the launcher settings (reboot smartphone sometimes resets widgets).
• 🛠️ Is the widget function disabled in settings (Settings) → Main screen screen → Widgets).

Widget added to the main screen|

Widget tied to the Watch app|

The Clock app has active alarm clocks.|

The sound on the phone is not turned off in Do Not Disturb mode-->

4. Voice assistant to control alarm clock

At Xiaomi Redmi. 9T You can control the alarm clock with a voice assistant -- both Google Assistant built-in and XiaoAI branded (if installed), which is convenient when your hands are busy or you're in another room:

To activate the voice assistant:

• 🎤 For Google Assistant: Say “OK Google” or hold the Home button (if configured).
• 🤖 For XiaoAI: Hold the Power button + Volume up (on some firmware) or say "Little Liu" (Chinese version).

If the voice assistant does not respond to commands:

• 🔊 Check if the microphone is on in the settings (Settings) → Annexes → Permits → Microphone).
• 🌐 Make sure your voice language is system-specific (e.g. Russian for Google Assistant).
• 📶 Check your internet connection – without it, voice commands don’t work.

5. If the alarm goes missing or does not work

Sometimes Redmi users 9T They're going to have to deal with the alarm clock not working or disappearing from the list, and there's a lot of reasons, from firmware bugs to the wrong settings:

• 🔕 Do Not Disturb Mode: Open the notification curtain and make sure the crescent (Do Not Disturb) icon is not active.This mode blocks all sounds, including alarm clocks, unless exceptions are configured.
• 🔊 Signal volume: Press the volume button and check if the slider is at zero.The alarm clock uses a separate sound channel, but sometimes resets.
• 📵 Energy Saving: Go to Settings → Battery → Power saving mode and turn it off. In this mode, the system can suspend background applications, including the Watch.
• 🔄 Autosynchronization: Make sure that in Settings → Accounts. → Google enabled the synchronization of the clock data (if you use Google alarms).

If the alarm goes off the list, try the following steps:

1. Open the Watch app and go to the Alarm tab.
2. Slip on the three dots in the top right corner and select Remove All (if there are old signals).
3. Create a new alarm clock and keep it.
4. Reboot your phone – sometimes it helps to get your settings back.

⚠️ Attention: On firmware MIUI 12.5 and below, there is a bug in which alarm clocks are reset after the system update. To avoid this, make a backup of the clock data through Settings before updating. → System system → Backup.

If nothing helps, try resetting the Watch app settings:

1. Go to Settings → Applications → Application Management.
2. Find the clock in the list and tap it.
3. Select Warehouse. → Clear the data.
4. Confirm the action – all alarm clocks will be removed, but the application will return to factory settings.

💡

If the alarm doesn’t work on Redmi 9T, 90% of the time, it's the Do Not Disturb or the energy saving mode!

Alternative Alarming-Scale Applications

If the standard alarm clock on Redmi 9T You don't like it (e.g., not enough tunes or not a progressive volume-up feature), you can set the side of the app. They often offer more customization options.-3 tested:

To set an alternative alarm clock:

1. Open the Play Market and find one of the apps above.
2. Set it up and open it.
3. Follow the setup instructions (usually you need to give permissions to notify and access the microphone to turn off by voice).
4. Set up an alarm clock and check its work.

The advantages of third-party alarms:

• 🎵 More melodies and the ability to upload your own.
• 📊 Sleep statistics and wake-up analytics.
• 🔇 The function of “smart awakening” (wakes up in the phase of light sleep).
• 🔒 Protection against accidental shutdown (to solve problems).

Please note, however, that third-party applications:

• 📱 Can drain the battery faster (due to work in the background).
• 🛡️ Additional permissions are required (e.g. access to alarm clock contacts by name).
• 💰 Sometimes contain advertising or paid features.

💡

If you have set a third-party alarm but it doesn’t work, add it to the battery optimization exception list: → Battery → Optimizing the battery → All applications → Find your alarm clock. → Select "No restrictions».

7. Restore the Remote Clock App

If you accidentally delete the standard Watch app (for example, via Settings) → Annexes → Delete it, don't panic, it can be restored without flashing it. Here are two proven ways to do it:

Method 1: Through Play Market (for global firmware)

1. Open Google Play.
2. In the search bar, type “Xiaomi Clock”.
3. Find the official app from Xiaomi Inc. (icon with dial).
4. Click Install - the system will restore the remote application.

Method 2: Mi App Store (for Chinese firmware)

1. Open the GetApps app (yellow package icon).
2. Go to the Control section → Remote applications.
3. Find the clock in the list and click Restore.

If both methods didn’t work, try resetting your phone to factory settings (but this will delete all the data!):

1. Go to Settings → About the phone → Reset settings.
2. Select Reset All Settings (not to be confused with Remove All Data!).
3. Confirm the action - after the restart, the Watch app will return.

⚠️ Note: Some custom firmware (like LineageOS or Pixel Experience) may not restore the standard Xiaomi Watch app, in which case, set an alternative alarm clock from the Play Market or run the original. MIUI via Fastboot.

FAQ: Frequent questions about the alarm clock on Redmi 9T