How to take a screenshot on Xiaomi 11T Pro: all ways + life hacks for MIUI

Xiaomi Smartphone 11T Pro with his 120-hertz AMOLED-With a powerful Snapdragon 888 processor and screen, it’s perfect for creating high-quality screenshots — whether it’s saving important correspondence, fixing an error in an app, or capturing a beautiful frame from a game. the buttons do not work the first time, the screenshots are saved to an unknown folder, then the gestures MIUI In this article, we will not only look at all the official ways to take screenshots, but also reveal hidden firmware features that the manufacturer does not advertise.

The Xiaomi 11T Pro features three versions of MIUI (12.5 Enhanced, 13 and 14) that each have nuances in screenshot management. For example, MIUI 14 offers the ability to take scrolling screenshots up to 10 meters long, and MIUI 12.5 Enhanced retains the classic button combination familiar from older models, and we tested all methods on a real device and found out which ones work faster and which are more reliable in critical situations (for example, when the phone starts to glit).

Important: If you upgraded from MIUI Global to MIUI EU or vice versa, some features may differ. At the end of the article, we added a method compatibility table with different firmware versions.

1. Classic method: power and volume buttons

The most versatile method that works on all Xiaomi smartphones, including the 11T Pro. It is independent of the MIUI version and is guaranteed to work even if touch gestures fail.

1. Open on the screen what you need to fix (message, page in the browser, game).
2. At the same time, press the power button (right) and the volume reduction button (left).
3. Hold them for 1-1.5 seconds until you hear the camera shutter sound and see the save animation.

⚠️ Attention: Xiaomi 11T Pro buttons are triggered with a delay ~0.3 seconds – if you let them go too quickly, the screenshot will not be taken. Also, avoid pinching buttons longer than 2 seconds: this can activate emergency mode or the off menu.

Screen unlocked and active |Fingers don't close important items |Sound isn't turned off (to hear confirmation) |No active calls or screen recordings-->

If the screenshot is not saved, check:

• 📁 Screenshots folder in the gallery - sometimes MIUI Creates duplicate folders after updates.
• 🔕 Do Not Disturb – it can block the shutter sound (but screenshot will still be taken).
• 🔋 Battery charge below 5% – the system can ignore button combinations to save energy.

2. The three-finger gesture is faster than the buttons

A MIUI feature that saves time: instead of pressing buttons, just swipe three fingers from top to bottom across the screen, which is especially convenient in games or applications where physical buttons are blocked (for example, in PUBG Mobile or Genshin Impact).

How to turn on the gesture (if it is turned off):

1. Go to Settings → Additional settings → Buttons and gestures → Screenshot gestures.
2. Activate the swipe switch with three fingers.
3. In the Gesture Settings section, you can select the swipe direction (default is down).

💡 Useful tip: if the gesture works accidentally (for example, when scrolling the tape in TikTok), reduce sensitivity in the same settings or turn off the feature for specific applications through Exceptions.

Power buttons + volume|Three-finger gesture|Voice assistant|Notification panel|Another way.-->

On the Xiaomi 11T Pro with MIUI 14, the three-finger gesture supports “scrollable screenshots” – after the first swipe, a Scroll button will appear, which automatically takes a picture of the entire long page (for example, chat in Telegram or articles in the browser), this feature does not work in all applications (for example, it is not supported in Instagram or banking applications due to security restrictions).

3. Screenshot via notification panel (for MIUI 13/14)

A little-known way to save when no buttons or gestures are working: MIUI 13 and 14 have a hidden screenshot button in the notification bar:

1. Swipe your finger down to open the notification panel.
2. Find the Screenshot icon (usually hidden under the swipe to the right or in the Quick Settings section).
3. Slip it on it - the screenshot will be taken instantly.

If no button:

• 🔧 Click Edit (pencil in the upper right corner of the panel).
• 📱 Find a screenshot in the list and drag it to the active area.
• 🔄 Restart your phone if the changes don’t apply.

⚠️ Attention: MIUI 12.5 Enhanced button is not used, instead it uses only a combination of buttons or gestures, MIUI Russia may hide this option due to local restrictions.

4. Voice assistant Google or Xiao AI

If you have busy hands or sensory gestures, you can take a voice screenshot, which is suitable for both the built-in Xiao AI (Chinese version of the assistant) and Google Assistant.

Method 1: Google Assistant (powered by global firmware):

1. Activate the assistant with your voice: say OK, Google or press the Home button.
2. Tell the command: Take a screenshot or Make a screenshot (in English it works more reliably).

Method 2: Xiao AI (Chinese firmware only):

1. Press the Power button for 2 seconds to call the assistant.
2. Say in Chinese: (jiétú) or in English: Take a screenshot.

🔊 Important: for the work of voice commands need:

• 🎤 Enable access to the microphone for the assistant in Settings → Annexes → Permits.
• 🌐 Internet connection (commands are processed on servers) Google/Xiaomi).
• 🔊 Do not disturb, otherwise the assistant will not hear the command.

5. Screenshot via ADB (for developers)

This method is useful if the sensor or buttons of the smartphone do not work, and a screenshot is urgently needed (for example, for an error report). ADB-Drivers and Included Debugging USB phone-on.

Instructions:

1. Connect Xiaomi 11T Pro to PC through USB-cable.
2. Open the command line (Windows) or the terminal (Mac/Linux).
3. Enter the command adb shell screencap -p /sdcard/screen.png
4. Copy the file to your computer: adb pull /sdcard/screen.png C:\screenshots\

⚠️ Note: This method requires the enabled debugging USB (Settings → The phone. → Version. MIUI — slip 7 Once, then return to the additional settings. → Also, once you've done the command, the screenshot won't show up in the phone gallery, but you'll have to manually move it to the folder. DCIM/Screenshots.

6. Problem Solving: Screenshots are not saved or blurred

If screenshots don’t appear in the gallery or are of poor quality, check out these points:

Problem 1: Screenshots are not saved

• 🗃️ Check the folder. DCIM/Screenshots through the file manager (sometimes) MIUI folder).
• 🔄 Reboot your phone – it will reset the gallery cache.
• 📱 Update the Gallery app through Play Market (on global firmware).

Problem 2: Blurred or cropped screenshots

• 🎮 In Games: Turn off Performance Mode in Settings → Special facilities → Game mode – it can lower the resolution.
• 🌐 In browsers: use PC Mode (in Chrome: ⋮ → PC mode) to avoid pruning.
• 🔍 Check the screen resolution: go to Settings → Display. → Screen resolution and select FHD+ (not HD+).

⚠️ Attention: Xiaomi 11T Pro MIUI 14 When Read Mode (gray filter) is turned on, screenshots can be yellowish. Turn it off before shooting in the Notification Panel.

💡

If screenshots are saved in.png format but don’t open, try renaming the file to.jpg or using a third-party gallery (e.g. Google Photos).

7 Hidden features: Scrolling screenshots and editing

MIUI offers advanced tools for working with screenshots that many people do not know about:

Function 1: Scrolling Screenshots

Available in MIUI 13/14. After you have created a regular screenshot:

1. Slip on the thumbnail in the lower left corner of the screen.
2. Click Scroll (icon with arrows down).
3. Wait for the page to automatically scroll and save a long shot.

Function 2: Quick editing

Immediately after the screenshot was created:

• 🖌️ Pruning: tap on the thumbnail → select the frame area.
• 🎨 Drawing: Use tools to add arrows, text, or blur.
• 📤 Sharing: Click Share to send a picture to the messenger without saving.

Function 3: Screenshot with delay

Useful for animations or temporary notifications:

1. Open Settings → Additional settings → Buttons and gestures → Screenshot with delay.
2. Turn on the function and set a timer (3 or 10 seconds).
3. Take a screenshot in the usual way - shooting will begin after counting back.

💡

To save screenshots automatically to Google Drive, install the Google Photos app and enable Backup and Sync in its settings.

FAQ: Frequent questions about screenshots on Xiaomi 11T Pro