What is the name of the charging for Xiaomi Redmi 8: the official name, characteristics and compatibility

Introduction: Why it is important to know the exact name of the charger

Xiaomi Redmi 8, released in 2019, is still a popular budget device due to its balanced performance and reliability. However, many users are faced with the problem: the original charger fails, loses or simply needs to be replaced.

Xiaomi doesn’t always specify the charger model on the case, and this information is often missing from the phone documentation, while using an inappropriate power adapter can cause slow charging, battery overheating, or even damage to the power controller. In this article, we’ll look at the official name of the charger, its technical parameters, and give you recommendations for choosing compatible analogues.

This is especially relevant for those who buy charging separately — the market is full of fakes under the brand Xiaomi, which are seemingly indistinguishable from the original, but the characteristics are far from it. To make sure you do not go wrong, it is important to know not only the name, but also the key parameters: current strength, voltage, supported fast charging protocols.

The official name of the charger for the Redmi 8

The original charging, which comes with the Xiaomi Redmi 8, has the following name:

Xiaomi power adapter MDY-10-EG (10W, 5V/2A). It's a standard charger with a connector. USB Type-A, which supports Quick Charge technology in the base version (no accelerated charging). 8 not equipped with fast charging support - the maximum charging power is 10 Which corresponds to the parameters of the adapter MDY-10-EG.

The body of the original adapter is usually marked with the following markings:

• 🔌 Model: MDY-10-EG (or MDY-10-EC for certain regions)
• ⚡ Entrance: 100-240V ~ 50/60Hz 0.3A
• 📱 Exit: 5V ≡ 2A (maximum power of 10 watts)
• 🏭 Manufacturer: Xiaomi or Mi (with logo)

If your adapter has other parameters (for example, 5V/1A or 9V/2A), This means that the charging is not original or is intended for another Xiaomi model, and the use of such an adapter can lead to an increase in charging time or even damage to the battery.

Technical characteristics of the original charging

To choose the right replacement, you need to understand the key parameters of the original adapter. Below is a table with the specifications of the Xiaomi charger. MDY-10-EG:

It’s important to note that the Redmi 8 doesn’t support fast charging, which means that even if you plug in a power adapter, it’s not a fast charger. 18W or 33W, The smartphone will charge no faster than the original 10W-Moreover, the use of powerful adapters (for example, from the Redmi Note 8 Pro) will not harm, but will not give any benefits.

⚠️ Note: If you see a charger with a marking MDY-11-EC (18W) or MDY-12-EG (33W), These are adapters for other Xiaomi models (like the Redmi Note 8 Pro or Mi 9) that are compatible with the Redmi 8 by connector, but will not speed up charging.

Compatible analogues: what charges are suitable for the Redmi 8

If the original charger is lost or fails, it can be replaced with similar models. 5V/2A (10W) connector USB Type-A. Below is a list of proven analogues:

• 🔋 Xiaomi MDY-08-EM — older model with similar parameters (5V/2A), Suitable for all budget smartphones Xiaomi.
• 🔌 Baseus BS-A06 — Universal adapter with Quick Charge support 2.0, but for Redmi 8 will work in the mode 5V/2A.
• ⚡ Anker PowerPort 1 (A1201) — power-pack 10W, compatible with most smartphones.
• 📱 Samsung EP-TA20E — Samsung Adapter with identical characteristics (5V/2A), fitting 8.

You can also use chargers from other smartphones, if their parameters are the same, for example, adapters from:

• 🍎 iPhone (5W or 12W) — They will charge more slowly but safely.
• 🤖 Samsung Galaxy A-series (5V/2A) — full-length.
• 📱 Huawei or Honor with the label 5V/2A.

Here are the best things to avoid:

• ❌ Power adapters 5V/1A (For example, from old Nokias, they will charge in the 2 slower.
• ❌ Fast charging. 9V/2A or 12V/1.5A without backward compatibility support – can cause overheating.
• ❌ Cheap no-name adapters without certification – the risk of short circuit or battery damage.

Check the output voltage (should be) 5V)

Make sure that the current is at least 2A

Use only the connector. USB Type-A

Avoid adapters with non-standard protocols (e.g. Dash Charge from OnePlus)

Prefer brands with certification (Xiaomi, Baseus, Anker, Samsung)-->

How to distinguish the original charging from a fake

The market is flooded with fake chargers under the Xiaomi brand, which are seemingly indistinguishable from the originals, but in terms of build quality and safety inferior to them.

1. Plastic quality and build: The original adapter has matte plastic without barbs, seams are flat, and the Mi logo is clearly printed. Counterfeits are often made of glossy plastic with uneven edges.
2. Weight: The original charger weighs around 30-35 Fakes are usually easier (20-25 (d) because of the use of cheap materials.
3. Labeling: The original is laser-printed or high-quality, not rubbed off, and on fakes, the letters are often blurred or printed with paint that eventually fades.
4. USB-Connector: In the original adapter, contacts inside the connector USB Type-A is golden and doesn't stagger. In fakes, the contacts are often dull or mobile.
5. Packaging: The original Xiaomi chargers are sold in a white box with a holographic sticker, and fakes can be colorful or sold without it.

Another reliable way to check is to use a tester or an app like Ampere (available on Google Play), connect the charger to your smartphone and check the actual current and voltage readings. 1.8A stress-on 5V, it's a fake.

⚠️ Warning: Fake chargers can not only slowly charge a smartphone, but also cause a fire due to a lack of protection from short circuit. UL (Underwriters Laboratories: 30% of uncertified charging fails basic safety tests.

Frequent charging problems with Redmi 8 and their solutions

Xiaomi Redmi 8 users often face problems with charging, and let’s look at the most common cases and how to fix them.

1.The smartphone is not charging or charging very slowly

Causes and solutions:

• 🔌 Cable problem: Try another Micro-USB cable. Xiaomi's original cables are often rubbed at the base.
• ⚡ Contaminated connector: Clean the smartphone charging port with a toothpick or compressed air. Dust and debris can block contacts.
• 📉 Faulty adapter: Check the charging on another device. If it doesn't work, replace it.
• 🔋 Battery wear: If the smartphone is older than 2 years, the battery may have degraded. Check its condition in the Settings menu → Battery.

2. Charging is interrupted or the smartphone does not recognize the adapter

Possible solutions:

• 🔄 Reboot: Sometimes it helps to normal smartphone reboot.
• 🔌 Connector check: If the cable is not well maintained in the port, the Micro-USB connector may be shattered.
• 📱 Resetting: In rare cases, a factory reset helps (but don’t forget to back up!).

3.The smartphone warms up while charging

It's okay if the heat is moderate, but if the body gets hot, it's a wake-up call.

• ❄️ Remove the case: Tight covers worsen heat sink.
• ⚡ Use original charging: Counterfeiting often causes overheating.
• 📵 Do not use your smartphone while charging: Games or videos increase the load on the processor and battery.
• 🔋 Check the battery: Bloated battery is a common cause of overheating.

💡

If the smartphone stopped charging after falling or getting moisture, do not try to force it to charge! This can lead to a short circuit.

Can I use wireless charging for Redmi 8?

Xiaomi Redmi 8 does not support wireless charging out of the box, as it does not have a coil, but there are two ways to get around this limitation:

1. Using an adapter for wireless charging: This is a small device that connects to a Micro-USB connector and allows you to charge your smartphone at a wireless station: 🔌 Baseus Wireless Charger Receiver ⚡ Nillkin Magic Tag

The disadvantage of this solution is that the adapter occupies a Micro-USB connector, so it will not be possible to charge and listen to music through wired headphones at the same time.

Installation of the wireless charging module inside the housing:

The wireless charging speed for the Redmi 8 will be lower than that of wired charging (usually around the same time frame). 5W), Because adapters don't support fast charging, wireless charging also heats up your smartphone, which can shorten battery life.

⚠️ Attention: Cheap wireless charging adapters often lack protection against overheating, which can damage the smartphone’s power controller. If you choose to use such an adapter, choose Qi-certified models (such as those from Baseus or Anker).

Where to buy the original charger for Redmi 8

Buy the original Xiaomi charger MDY-10-EG There are many ways to do this. It's important to choose proven sources to avoid forgery.

1.The Official Xiaomi Stores

The most reliable option is to buy in branded stores or on the official website of Xiaomi:

• 🌍 Official website of Xiaomi Global
• 🏬 Mi Store (available in most major cities)
• 🛒 Official dealers (for example, Svyaznoy, M.Video, Eldorado in Russia)

2.Verified online sites

If there are no official stores nearby, you can order charging at the following sites (but be sure to check the reviews and rating of the seller!):

• 🛒 AliExpress – look for sellers with a rating above 98% and reviews about the originality of the product.
• 🌐 Amazon – filter results by “Sold by Amazon” or “Fulfilled by Amazon".
• 🏪 Wildberries, Ozon – choose products marked “Original” and verified reviews.

3. Xiaomi Service Centers

Authorized service centers often sell original accessories, which is a good option if you need not only a charger, but also, for example, a new battery or cable.

The cost of original charging Xiaomi MDY-10-EG varying 500 before 1000 depending on the region and the seller, counterfeits are usually in the 2-3 cheaply (150-300 RUB), but their purchase is not justified due to the risks to the smartphone.

💡

Before buying a charge on the marketplace, be sure to ask the seller for a photo of the real product with the label. MDY-10-EG and a holographic sticker on the package.

FAQ: Frequently Asked Questions