Xiaomi Redmi AirDots 2 wireless headphones (also known as Redmi Earbuds Basic 2) have become one of the most popular budget headphones. TWS-The market is very competitive with the price-to-quality ratio of audio, and many users have difficulty launching their first devices because the initial pairing process has its own characteristics that distinguish them from classic Bluetooth headsets. Unlike many analogues, there is no button on the case of the headphones themselves, and the activation of the search mode occurs automatically when extracted from the case.
Getting Bluetooth right the first time is critical to the future of the stereo pair. If you skip the left-right-channel synchronization step, the device can only work in mono mode or broadcast audio to only one speaker, and in this article, we will discuss in detail the algorithm for Android and iOS smartphones, and how to fix common connection errors.
To get started, make sure your Redmi AirDots 2 is fully charged.The indicator on the front of the charging case should burn red while charging and go out or catch white (depending on the revision) at full charge. Also make sure your smartphone has a wireless module on and is visible to other devices.
Preparation of headphones for the first turn on
The first step before you try to find a device with your phone is to activate the headphones themselves correctly. The device doesn't have a physical power button on the case, so the power management is completely tied to the contacts in the charging case. You need to remove both earphones from the case at the same time.
Once removed, the headphones should start flashing. An important nuance is the behavior of the indicators: if they flash red, then the charge is low. If there is a rapid alternate flashing of white light, this means that the device is in search mode and ready to pair. In some cases, the left and right channels can first connect to each other, and then only one of them will blink.
Why are the lights flashing?
Make sure that the headphones remove protective films from the charging contacts if they were pasted by the manufacturer.Dirt or oxidation on the contacts can cause the earphone to not turn on when removed from the case, which will disrupt the synchronization process of the stereo pair.
💡
If the indicators do not light up after being removed, put the headphones back in the case for 5-10 seconds, then pull them out again, holding them with your fingers behind the touch areas for activation.
The process of pairing with Android smartphones
Android provides the most extensive functionality for managing Bluetooth devices, but the process of connecting Xiaomi Redmi AirDots 2 is standardized here. After you take out your headphones and see the flashing of indicators, you need to go to the settings of your smartphone.
Open the Settings menu and select the Bluetooth partition. Turn on the switch if it's off and press Device Search or New Device. The list of available gadgets should show the name Redmi AirDots. 2 (Mi True Wireless EBs Basic_2). Click on it to start the mating procedure.
☑️ Connection algorithm
Once successfully connected, you'll hear a distinctive beep in your headphones, and the phone's status bar will display a battery icon for each headphone and case (if the phone model supports case charge display), and you can now run any media file to check the sound quality.
Configure the connection on the iPhone (iOS)
Apple device owners need to consider how Bluetooth works in the iOS ecosystem. While Redmi AirDots 2 doesn't have native support for Apple's W1/H1 protocol, the connection process is standard and stable. As with Android, first remove the headphones from the charging case.
Go to Settings → Bluetooth on your iPhone or iPad. Make sure the slider is active. In the "Other Devices" section, find the Redmi AirDots 2 bar. Tap the name to initiate the connection. The system can request confirmation of the action to be taken.
⚠️ Note: On iOS, sometimes only one headphone in the list of connected devices can be displayed, even if both are working, this is a feature of the protocol in which the phone sees the master device, and the second headphone connects to the first one unobtrusively to the system.
It is important to note that the Xiaomi headphone battery widgets on the iPhone are not always displayed correctly without installing third-party apps from the App Store. With standard iOS tools, you will be able to see the overall charge level or charge of the main channel, but the detail for each earpiece can be limited.
Problem Solving: Headphones are not visible or connected
Quite often, users are faced with a situation where the phone does not see the Xiaomi Redmi AirDots 2, although the indicators are flashing.This can be caused by the fact that the headphones were previously paired with another device and try to connect to it automatically, ignoring the new request.
In this case, you need to perform a forced reset of Bluetooth settings on the headphones themselves. To do this, place both headphones in the charging case, then pull them out and quickly press 5 times on the touch panels of both headphones at the same time. Indicators should blink several times, which signals a reset of the pairing list.
Also, the problem can be a crowded Bluetooth list on your phone, so if you have a lot of old devices, delete unnecessary profiles, sometimes it helps to completely turn off Bluetooth on your phone. 10-15 Seconds and re-energize before searching.
| Symptoms. | Possible cause | Decision |
|---|---|---|
| The indicator is not on. | Battery discharged or poor contact | Put in the case for charging, wipe contacts |
| Only one headphone is visible. | Lost synchronization between L and R | Perform a reset settings (5 taps) |
| The sound is interrupted. | Interference or low charge | Get closer to the phone, charge the device |
| No sound in games. | High codec latency | Use the Game mode (triple press) |
⚠️ Note: If after resetting the headphones continue to behave incorrectly, try "Forget the device" in the Bluetooth settings of the phone and repeat the pairing procedure from scratch.
Management and additional functions
Once successfully connected, Redmi AirDots 2 provides access to a number of useful controls via touchbars. The default settings may differ, but the basic functionality is the same for all firmware versions. Single tap usually pauses a track or answers a call, and double tap launches a voice assistant or the next track.
One of the key features of this model is that it has a low-latency game mode, and you have to quickly press three times on the touchpad of any of the headphones to activate it, and you'll hear a voice message, "Game mode," confirming that the function is enabled, and a triple tap will turn off the mode.
The volume can also be adjusted directly from the headphones, although this depends on the regional version of the firmware. In some versions, the retention of the touch panel increases or decreases the volume, in others, only switching the tracks works. For fine tuning, you can use the Mi Wear app or Xiaomi Earbuds if your model is supported.
💡
Triple tap activates the game mode, reducing the latency of sound, which is critical for shooters and rhythm games on mobile devices.