Wireless headphone users often face a situation where one device stops syncing with the other or the smartphone refuses to see the headset. In the case of the popular Xiaomi Mi AirDots Pro (also known as Redmi AirDots 3 Pro), this is solved quite simply, but requires accurate execution of the sequence of actions. Reset to factory settings eliminates software failures, clears the memory of bluetous modules from old pairing profiles and returns to the devices stability of work.
In this article, we will discuss in detail all available methods of rebooting and completely resetting your headphones. You will learn how to properly prepare the case for the procedure, what indicators signal the success of the operation and what to do if standard methods do not help restore the functionality of the gadget.
Before we take any drastic measures, we need to make sure that the problem is a software failure, not a dead battery. Full reset is an effective diagnostic tool that often helps avoid going to the service center. Let's look at the step-by-step algorithm of actions that is relevant for all versions of the AirDots Pro line.
Preparation of headphones for the reset procedure
Before any manipulation of the headphone software, it is necessary to ensure a stable power supply to the devices. If the charge of the case or the headphones themselves is critically low, the reset process can be interrupted, which will lead to unpredictable errors in the operation of the controller.
Pay attention to the indicators inside the case: they should light up, signaling the start of charging. If the LEDs do not respond, wipe the contacts on the headphones and inside the sockets with dry soft cloth. Contact oxidation is a common reason why devices do not turn on and do not respond to reset commands.
It is also important to disable Bluetooth on a smartphone or tablet that previously had headphones connected to, which will prevent automatic reconnection during the setup process and allow devices to go into standby mode for a new pair. Removing the old profile from the list of devices on the phone will be a great addition to the physical fitness of gadgets.
⚠️ Warning: Do not attempt to reset if the headphones are in active music playback or conversation mode.Put them in the case first and wait until they go into charging or waiting mode.
☑️ Preparation for discharge
Method of complete reset through touch panels
The main way to bring the Xiaomi Mi AirDots Pro back to factory status is to use the touch zones on the headphones themselves.This procedure requires a certain dexterity and precise timing, as the system responds to prolonged pressing.
Find the sensor areas on the headphone legs. You need to press and hold the sensors on both devices simultaneously for about 5-7 seconds, at which point the headphones should turn off, as signaled by a red indicator or voice message (depending on the firmware version).
Keep your fingers on hold, hold the sensors for a while. 10-15 So when you hear a specific beep, or you see the lights flashing in white, you can release the headphones, which means that Hard Reset has successfully launched.
What to do if the timing is lost?
After a successful reset, the headphones will automatically go into pairing mode. The indicators will flash frequently, signaling readiness to search for a new device. Now you can open the case cover (if you put them there) or simply search for the device in the Bluetooth menu of your smartphone.
Alternative way through charging case
In some versions of the Redmi AirDots 3 Pro or in certain versions of the microcode, there is an alternative method that uses a function button on the case itself, if it is provided by the design. However, the classic AirDots Pro model relies more on sensors. If the sensor method does not work, you can try a combined approach.
Place the headphones in the case, but don't close the lid right away. Hold the sensors on the headphones while inside the case for 10 seconds. Then, without letting go of the sensors, close the case lid and wait another 5-10 seconds. Open the lid and remove the headphones.
This method helps in cases where the standard algorithm does not work due to the behavior of the Bluetooth module. Recharging modules inside the case during the button clamping can force the controller to reboot.
💡
If you have a model with a button on your case (check the specification of your version), try to pinch it for 10 seconds with the headphones open inside - this can activate the reset mode.
Indication and signals of successful discharge
Understanding light and sound signals is key to successful diagnostics. Xiaomi Mi AirDots Pro is equipped with a smart notification system that reports the status of the device. During the reset procedure, the indicators behave specifically, different from the usual pairing mode.
Usually, after a successful reset, the headphones emit a distinctive sound that differs from the standard "Power On" LEDs can flash several times red, then go into rapid flashing mode in white, which means that the internal memory has cleared of old data.
Below is a table that deciphers the main states of the indicators during and after the procedure:
| Status of the indicator | Colour | Meaning |
|---|---|---|
| It's burning all the time. | Red. | Charging or the earphone is off. |
| Frequent flashing | White | Matching mode (after discharge) |
| Slow blinking | White | Waiting for connection (earphones included) |
| Flash and go out. | Red. | Battery discharge or shutdown |
If after all the manipulations, the indicator does not behave as described in the instructions, it is possible that the problem is hardware in nature, in such a situation, repeating the reset procedure may not work, and deeper intervention will be required.
Solving mating problems after resetting
Frequently, the reset is successful, but the headphones don't connect to each other, working as two independent mono-devices, which is called stereo pair desynchronization, and to fix this, you have to reset the primary mating process between the left and right channel.
Remove the headphone profile from the phone's Bluetooth menu. Place both headphones in the case and close the lid. Open the lid, but don't remove the headphones. Press and hold the sensors on both headphones simultaneously for 5 seconds until the indicators light up red, then let go. This action often forcibly initiates a search for each other.
If the phone sees two devices with similar names (e.g., "Mi AirDots Pro L" and "Mi AirDots Pro R"), then the pairing has not occurred. Repeat the deletion and reset procedure again, making sure that both earbuds are outside the case at the time of pressing.
⚠️ Warning: When connecting, always choose a device without the "L" or "R" in the Bluetooth list. If you see only one device, but the sound comes from only one earphone, then the stereo is not ready, and you need to reset again.
Why the headphones do not reset: frequent errors
Sometimes users complain that no combination of buttons works, and often it's a simple inattention to detail, like a protective film on sensors that wasn't removed when you bought it, can block touch, and check if the headphones are transparently insulated.
Another reason is that sensors are contaminated with fat or sweat, and sensor sensitivity can decrease, and the device does not register a prolonged press, wipe the touch area with an alcohol wipe, and degrease the surface before you try again.
Also, you should consider that in some cases, the freeze occurs at the firmware level, and a simple reset does not help. In such rare cases, you may need to update the software through the Xiaomi Earbuds or Mi Wear app, if the headphones are at least somehow responsive to the connection.
💡
If the sensors do not respond to the press even after cleaning, try to slightly change the angle of touch or the force of pressing – the response zone can be shifted relative to the center of the site.