Modern wireless headphones have become an integral part of the digital lifestyle, offering freedom from wires and high sound quality. Xiaomi Earphones 2 Basic has proven to be an affordable and reliable solution for everyday use, whether listening to music in transport or communicating during sports. However, despite the simplicity of the design, the initial configuration of the device can raise questions for users who have not previously encountered the ecosystem of Bluetooth accessories of this brand.
Synchronizing your device with your smartphone takes only a few minutes, but requires a certain sequence of actions to successfully establish a connection. In this guide, we will discuss all the stages of connection in detail, look at the features of working with different operating systems and provide solutions for common technical problems.
It’s important to understand that the algorithms for Bluetooth protocols may vary slightly depending on the version of your phone’s operating system. Below are the universal steps that are relevant for most devices, but we’ll also focus on the specific nuances of the MIUI and iOS interface.
Preparation of headphones for the first pairing
Before you start searching for a device in the smartphone menu, you need to make sure that the headphones are in pairing readiness mode. Usually Xiaomi Earphones 2 Basic automatically switches to this mode when first removed from the charging case, if they have not previously been connected to another gadget.
If the headphones were previously used with another phone, they may try to connect to it automatically, ignoring your new smartphone, which would require a forced transfer of the headset to Pairing Mode. Often, it is enough to put the headphones back in the case, close the lid, wait a few seconds and re-extract them, holding the touch zones with your fingers.
Make sure the case and headphones are charged enough to perform the procedure. Low charge can cause the Bluetooth module to work unstable and interrupt the setup process. It is also recommended to turn off Bluetooth on other nearby devices to avoid addressing conflicts and erroneous connection.
- 🔋 Check the case charge level and make sure the indicators burn when extracted.
- 📱 Turn off Bluetooth on other devices that have previously been paired with the headset.
- 👂 Make sure that protective films are removed from the contact areas of the headphones for proper charging in the case.
⚠️ Warning: If the headphones don't flash after being removed from the case, they may be discharged or in deep sleep mode. 15-20 minutes before trying again.
Instructions for connecting to Android smartphones
Owners of Android devices, especially Xiaomi, Redmi and POCO, They have the advantage of an optimized interface for fast accessory connectivity, starting with activating the wireless module in the system settings, opening the quick swipe bar from top to bottom, or going to the Settings menu. → Bluetooth.
Once Bluetooth is enabled, the system will automatically start scanning the available devices. The Xiaomi Earphones 2 Basic should appear in the "Available Devices" list. Click on it to initiate pairing. The screen may see a request for confirmation of the access code or just a notification of the connection.
For MIUI users, a pop-up window is often available with animations and displaying the charge of each headphone separately. If the standard window does not appear, do not worry - the functionality of the audio device will not suffer from this. Once the connection is successful, the corresponding icon will appear in the status bar, and in the Bluetooth settings, the status will change to Connected.
☑️ Checking Android Connectivity
In some cases, the system may request permission to access contacts or call logs to make the headset work as a Hands-free device, and it is recommended to agree to these requests so that you can answer calls and see the name of the person you are talking to.
Matching with Apple iOS devices
Connecting Xiaomi Earphones 2 Basic to an iPhone or iPad is standard protocol, as these headphones do not support the proprietary Apple W1/H1 chip. However, the connection quality and stability remain high. The first step, as with Android, is to switch to the settings menu.
Open Settings → Bluetooth and make sure the switch is activated. The smartphone will start searching for devices. As soon as the name Xiaomi Earphones 2 Basic appears in the list of Other Devices, tap it. The communication process takes a few seconds to set up.
It’s worth noting that iOS won’t have the signature pop-up animations typical of the original AirPods. Headphone charge level will be seen in the Battery widget or in the control center, but the detail may be less detailed than on Xiaomi devices.
- 🍏 Make sure the iOS version is updated to current for better codec compatibility.
- 🔊 Check the sound balance settings in the Universal Access section if the hearing in one ear is quieter.
- 📞 To manage calls, use standard Siri gestures or double-tapping your headphone.
⚠️ Note: When connecting to iOS, you may need to re-pair if the headphones have previously been used with an Android device that has not been “forgotten” in Bluetooth settings.
Use of the Xiaomi Earbuds app
To expand the functionality and fine-tuning of the sound profile, the developers recommend using a specialized application Xiaomi Earbuds. This utility allows not only to control the charge level with high accuracy, but also to update the firmware of the headphones, which often improves the stability of the connection and the quality of noise reduction.
You can download the app from the Google Play Market or App Store. Once installed, run the scan — the program will find the connected headphones. The interface of the application provides equalizer settings, a choice of modes of operation (for example, low latency game mode) and reassignment of touch control.
Updating the firmware is critical to the long-term performance of the device, and manufacturers have regularly released patches that eliminate left- and right-channel desynchronization, taking a few minutes to update and requiring the headphones to be near the phone and have enough charge.
Why update the firmware?
You can also find a headphone search feature in the app, which helps locate the device, if you lose it within the room, the headphones will start to emit a loud signal. This is a useful option for distracted users.
| Function | No app. | With an annex |
|---|---|---|
| Charge level | General/About | Exact for each ear |
| equalizer | Not available. | Full setup |
| Update of the PO | Not available. | Automatic. |
| Headphone search | Not available. | Sound signal |
Solving Connection Problems and Resetting Settings
Even the most reliable devices sometimes encounter software failures that prevent normal connection, so if the phone sees the headphones but doesn't connect, or the connection is cut off immediately after installation, the most effective method is a full reset (Factory Reset), which returns the headset to factory settings.
To perform a reset on the Xiaomi Earphones 2 Basic model, you usually need to place both headphones in a charging case, leave the lid open and press the touch zones on both headphones simultaneously. Hold the touch for 10-15 seconds until the indicators light up a certain color (often orange or fast flashing white), which signals a successful reset.
Once reset, you need to go to the Bluetooth settings on your phone, find your model in the list of previously paired devices, and select the option “Forget device” or “Delete” only after that you can re-initiate the pairing process as a new device.
If the problem persists, try clearing the Bluetooth cache on your Android smartphone. Go to Settings → Apps → Show System Processes → Bluetooth → Memory → Clear the cache. This action is safe and will not delete your personal data, but will restart the Bluetooth service.
Features of management and operation
Once successfully connected, it is important to master basic control, which is done through touch panels on the legs of headphones. Single touch usually answers the call or pauses music, double touch switches tracks, and triple activates the voice assistant. Long-term retention can adjust volume or switch noise reduction modes, depending on the settings.
For the best sound quality and connection stability, try not to block the antennas with your hands during active activities. Although Bluetooth 5.0 and higher has good penetrating ability, the human body can serve as a barrier to a radio signal, especially if the phone is in the back pocket.
Regularly cleaning contact points on headphones and inside the case with alcohol wipes will help avoid charging problems, which are often mistaken for software errors. Contact oxidation is a common reason why headphones do not turn on when retrieving.
💡
If the sound is quieter, check the speaker's protective net, which could have been clogged with earwax. Clean it carefully with a soft dry brush.
Remember, wireless range is limited. When you exit the confident reception zone (usually 10 meters without obstacles), the headphones will try to reconnect automatically when you return to range.