How to turn on vibration when calling Xiaomi: the complete guide

Modern smartphones, especially those from Xiaomi, Redmi and POCO, offer users many ways to alert, but one of the most common problems that owners of new devices face is the lack of tactile return during an incoming call, which can occur for various reasons, from randomly activated Do Not Disturb mode to specific settings of the MIUI or HyperOS interface.

Understanding how to properly adjust the vibration is critical for those who are often in noisy places or simply prefer to feel the ring in their pocket rather than hear it. In this article, we will examine in detail all possible causes of the vibration response disappearing and provide step-by-step instructions for its recovery.

We’ll look at both standard system menus and hidden engineering settings that allow you to finely adjust the strength and duration of the vibration. If your Xiaomi smartphone stops vibrating, don’t rush to carry it to the service center – most likely, it’s a software glitch or an incorrect sound profile.

Basic sound and profile settings

The first step in solving the problem should always be to check the basic parameters of the sound. Often users inadvertently switch the profile to "No sound" or "Vibrio Only", but forget that in some versions of the MIUI shell, these modes may not work correctly or conflict with the alarm settings.

To start, make sure that the volume slider for the call is not in the minimum position. Even if vibration is on, some Xiaomi models can ignore the tactile response if the program volume of the media or call is twisted to zero. Go to the Settings → Sound and vibration menu and check the position of the sliders.

Also worth paying attention to is the sound mode switch, which is usually in the notification curtain or on the side of the device (if there is a physical slider). Make sure you choose Sound or Vibration mode**, but not No Sound. In No Sound mode, the tactile response is often forced off by the system.

• 🔊 Check that the Call slider is raised above the minimum level.
• 📵 Make sure that the button of the button is not activated.
• ⚙️ Reboot the device to reset temporary software errors of the sound driver.

If the basic settings are fine but the vibration is still not there, it may be that the problem lies deeper in the resource allocation system or in a particular Phone application.

Vibration setting for specific contacts and applications

One of the features of the MIUI shell is that you can customize notifications for each contact or application, and if you don't have a phone vibrating when you call from a particular person, the problem may be their contact card.

Open the Contacts app, select the subscriber you want, and click on the edit button or "More." Find Melody or Notification Sound. There may be a separate setting where the vibration is turned off or minimized, often after updating the phone book or syncing with your Google account.

Also, check the settings of the Phone app itself. In some cases, third-party calls installed by the user can intercept the vibrator control. Go to Settings → Apps → All Apps → Phone and check permissions. The application must have access to the device's vibration control.

⚠️ Note: If you use third-party themes, they may conflict with the system sound settings. Try switching to a standard theme in the Themes app to rule this out.

You can also adjust the vibration force separately for calls and notifications. From the Settings menu → Sound and vibration → Vibration, you can choose one of the modes or customize your own.

Do Not Disturb and Schedules

The Do Not Disturb (DND) function is a powerful tool that often causes no vibration. Unlike simple silent mode, DND can completely block any interrupts, including tactile ones, unless the exceptions are configured.

Check if this mode is activated. Go to Settings → Sound and vibration → Do not disturb. If mode is on, make sure that the exceptions allow calls from selected contacts or recalls. In some versions of MIUI, when active DND, the vibration is turned off globally, regardless of other settings.

You should pay special attention to schedules. The system can automatically turn on silence mode at night or during meetings on the calendar. If your phone stopped vibrating at a certain time of day, the automatic rule most likely worked.

• 🌙 Check if Sleep or Night Mode is enabled in the Quick Settings Curtain.
• 📅 Check the schedule in the “Do Not Disturb” settings for active time intervals.
• 📞 Make sure that in the exceptions DND Allowed calls from all or selected contacts.

Special capabilities and vibration strength

In the deep settings of Android and MIUI, there is a section called "Special features" that can be found to provide more detailed tactile feedback management options, which regulates not only the presence of vibration, but also its intensity.

Go to Settings → Advanced Settings → Special Features → Vibration (the path may vary slightly depending on the version of MIUI). Here you will see a vibratory force slider. If it moves to the left, the phone will vibrate barely or not at all.

The same menu often provides a pre-response vibration setting, which is a useful feature to increase the tactile signal time to avoid missing a call. For models with a linear vibrator motor (such as the flagship Xiaomi 13, 14), Standard, Pulse and Rhythm modes are also available.

Settings -> Advanced settings -> Special features -> Vibration

Changing these settings may require rebooting the device to take effect, especially if you’re changing the vibration type from analog to digital.

Physical vibrator inspection and diagnostics

If the software settings don't work, you need to rule out hardware malfunction. A vibromotor is a mechanical device that can wear out or fail over time after falls.

To check the vibrator performance in Xiaomi phones, there is an engineering menu CIT. To get into it, open the Phone app and type the code ##6484##. In the menu that opens, find the item "Vibrator" or "Vibration".

If you run the test, you'll feel if the motor is working, if the test has vibration and the system doesn't, it's the software problem, and if the motor is silent even on the engineering menu, you'll probably need a replacement component.

⚠️ Attention: Do not perform a vibration test by holding the phone too tightly in your hand, which may give a false impression of motor weakness.

It is also worth checking whether the speaker and the vibrating membrane holes are clogged with dust or pile, which sometimes happens in older models.

Table: Comparison of vibration settings in different versions of MIUI

The interface of settings may vary depending on the version of the firmware installed. Below is a table that helps you navigate where to look for the desired parameters.

As can be seen from the table, with the release of new versions of the shell, Xiaomi seeks to unify the settings, transferring complex parameters to the special features section.

Hidden codes and additional commands

For advanced users, there are ways to control the vibrator through ADB (Android Debug Bridge) or special commands, but in the case of Xiaomi, most often, standard tools are enough.

Resetting your audio settings won’t affect your personal data, photos, or contacts. It will return all volume sliders and vibration profiles to factory values, which often helps if the system has accumulated software “junk” after many updates.

There's also a nuance with Pocket mode: If the proximity sensor is contaminated or covered with a protective film, the phone can think it's in your pocket and block the vibration so as not to wake the wearer up early.

In rare cases, installing apps to amplify the vibration from Google Play helps, but they work software-based, increasing the frequency of the oscillations, which is not always effective at the hardware level.

Frequently Asked Questions (FAQ)

💡

If you upgrade to HyperOS and the vibration is gone, check the Tactile Response settings in the Sound section, as the new vibration engine’s logic is different from MIUI.

💡

In most cases, the problem is solved by checking the “Do Not Disturb” mode or retuning the vibration force slider in special capabilities.