Xiaomi’s modern wireless headphones, particularly the Mi True Wireless Earbuds Basic 2, have gained popularity due to their affordable price and decent sound quality. However, the initial setup of the device can be difficult for users who first encounter the ecosystem. TWS (True Wireless Stereo: The pairing process often seems complicated only at first glance, but knowing the nuances avoids most common mistakes.
Unlike wired acoustics, there's no physical contact, and all communication is built on Bluetooth protocols. It's important to understand that the right primary synchronization ensures stable operation in the future. If you ignore the basic rules of pairing, the device can behave unpredictablely: lose signal, do not charge or do not synchronize with each other.
This guide will help you not just turn on the gadget, but to adjust it correctly for everyday use. We will cover all the steps from checking the charge to fine-tuning the system menu of the smartphone. Follow the instructions consistently to get the most out of listening to music.
Preparation for first activation and charge check
Before you try to find a device on the list of available, you need to make sure that it is ready for work. Factory packaging often involves the presence of protective films on the contacts or partial battery discharge during long-term storage. Insert both earphones in the charging case and connect it to the power source through the Micro-USB port located on the case.
The indicator on the front of the case should light up red to signal the charging process. When the battery is fully full, the indicator will go out or change color, depending on the revision of the device, usually this process takes about 1.5 hours.
💡
Leave the headphones in the case for 15-20 minutes after purchase, even if the indicator shows a full charge - this will help activate the chemical processes in new batteries.
After charging, remove both headphones from the case at the same time, they should light up the indicators. If there is no light signal, check if you have removed the protective stickers from the charging contacts on the headphones themselves. Lack of contact with pins in the case is a common cause of a device that does not work.
The process of pairing with Android and iOS
The main stage of setting up is through the Bluetooth menu of your smartphone. The algorithm for the Android and iOS operating systems is almost identical, since the data protocol is universal. Open the phone's settings and go to the wireless connection section.
Turn on Bluetooth and start searching for new devices, at which point one of the headphones (usually right) should flash a blue-white light quickly, which means pairing mode, and the left earphone at this time may flash slower or not at all, waiting for synchronization with the right.
☑️ Connection algorithm
The list of available devices will show a record of MI True Wireless EBs Basic 2 or similar. Click on it to start the connection. Once successfully connected, the voice assistant can say a welcome phrase, and the headphone indicators will flash less often, signaling to work in normal mode.
Synchronization of left and right headphone
One of the most common problems is channel desynchronization, where sound is played in only one ear, or devices are not combined into a stereo pair, which can happen if you only take one earbud out of the case or interrupt the initial connection process.
Place both headphones back in the charge case and close the lid (if designed) or just leave them in the contacts. Then remove them at the same time. If they don't connect to each other automatically, try touching the touch areas on both headphones 5 times in a row.
⚠️ Note: When performing a reset, make sure that both headphones are outside the case and are not connected to the phone at the moment, otherwise the command may not execute correctly.
After a series of taps, the indicators should flash several times, after which the headphones should find each other. Successful synchronization with each other (before connecting to the phone) is evidenced by the fact that the indicator on one of them (usually on the left) goes out or flashes very slowly, and on the right continues to blink, waiting for connection to the smartphone.
Table of indicators and their values
Understanding light is key to diagnosing the state of the device: different blinking modes tell the user about battery status, connection process, or error. Below is a transcript of the main signals.
| Indicator mode | Colour | Meaning |
|---|---|---|
| Fast blinking. | White-blue | Interconnection mode (device search) |
| Slow blinking | White | The device is connected and working. |
| Constant glow | Red. | Charging is in progress. |
| The indicator goes out | - | Charging is completed or the device is off |
Note that some Xiaomi Mi True Wireless Earbuds Basic 2 versions may have slightly different color displays, such as red, which can change to green when fully charged. Always focus on the behavior of the indicator in the context of your actions.
Touch panel management
The Basic 2 has a touchscreen that allows you to control playback, receive calls, and activate voice assistants. The touch area is located on the outer flat part of the headphone body. You don't need to push hard, you just need to touch lightly.
Single tap usually pauses the track or resumes playback. Double tap is often used to answer an incoming call or re-dial the last number. Triple tap can activate the voice assistant (Google Assistant or Siri) if it is supported by your smartphone.
The secret of activating the game mode
It is important to keep the sensory area clean. Fat, sweat or moisture can reduce the sensitivity of the sensor, leading to command skips. Regularly wipe the body with a soft dry cloth to ensure stable operation.
Solving Typical Connection Problems
Even if you follow all the instructions, there may be technical failures. If the phone sees the device but writes “Connection error” or “Unable to hide”, try removing the headphone profile from the list of previously used devices (Forget the device) and repeat the search procedure again.
Often the problem is the overcrowded memory of the phone's Bluetooth module. If you've previously had a lot of gadgets connected, the system may not save new profiles, in which case cleaning the list of conjugated devices in your smartphone settings often solves the problem.
⚠️ Attention: If the headphones are not charged in the case, wipe with an alcohol napkin the metal contacts on the headphones themselves and the pins inside the case - the oxidation of contacts is the main reason for the failure.
In case nothing helps, perform a full reset (Hard Reset). To do this, place the headphones in the case, press the touch areas on both headphones (being in the case or outside it, depending on the version) and hold for about 20 seconds until the color of the indicator changes. Then repeat the pairing procedure as with a new device.
💡
The main reason for connection problems is that the left and right earbuds are out of sync with each other, not with your phone. Always start your diagnosis by checking the connection within the pair.