Connecting the Xiaomi Redmi soundbar TV Samsung TV Soundbar: All the Ways

Soundbar Xiaomi Redmi TV Soundbar is a budget-friendly yet functional solution to improve the sound of your TV.If you're a Samsung Smart owner TV If you want to connect to it the speaker system from Xiaomi, you have several ways: from a simple Bluetooth connection to an advanced connection through the Internet. HDMI ARC But not all methods are equally effective, depending on the TV model, the firmware version, and even the type of content you watch.

In this article, we will discuss all possible connection options, including optical connection, 3.5 mm. AUX We'll also talk about how to avoid typical problems like no sound, synchronization, or format incompatibility. TV, And that's often ignored in standard instructions, but without which the soundbar might not work properly. If you've tried to connect and you've had a problem, you'll find solutions here.

1.Preparation: What will be needed to connect

Before you start setting up, make sure you have everything you need. - Xiaomi Redmi TV Soundbar supports multiple interfaces, but not all cables come with a bundle:

• 🔌 Cable HDMI (preferably 2.0 or higher ARC/eARC) — If you plan to connect through HDMI.
• 🎧 3.5 mm cable AUX (standard "jack" - for analog connection.
• 🔄 Toslink Optical Cable – If Your Samsung TV optically exited.
• 📱 TV remote control – to access sound settings.
• 🔋 Soundbar power supply – it needs to be connected to the socket, even if you use Bluetooth.

Also check the connectors on the back of the TV. Samsung 2018-2026 models usually have:

• 📺 HDMI ARC (signposted "ARC" near-port).
• 🔊 Optical Out (square connector under plastic plug).
• 🎵 AUX Out (3.5mm, but less common - usually on budget models).

⚠️ Note: If your Samsung is yours TV Released before 2016, it may not have support HDMI ARC. In this case, the best option would be optical connection or Bluetooth (if the soundbar model supports this protocol).

Remember to update the TV firmware to the latest version, which will help avoid problems with recognizing external audio devices. → Support → Updating the software.

2. Connection through HDMI ARC: Best Option for High Quality Sound

HDMI ARC (Audio Return Channel is the most modern and reliable way to connect a soundbar to Samsung TV. It allows you to transmit multi-channel sound (including Dolby Digital and the Internet). DTS) So, without any loss of quality, and you can also control the soundbar volume directly from the remote of the TV:

1. Turn off the TV and soundbar from the socket.
2. Connect one end. HDMI-port-wire HDMI ARC on the TV (usually a port with an inscription "ARC" Or "eARC") and the other one to the connector. HDMI IN soundbar.
3. Put both devices on the network.
4. On the Samsung remote. TV Click Source (or Input) and select the port to which the soundbar is connected.
5. Go to Settings. → Sound. → Sound output and select HDMI ARC Or the external speaker (HDMI).

If the sound does not appear automatically, check the following settings on the TV:

• 🔊 Sound format: In the menu Settings → Sound. → Expert settings → Select Bitstream (to transmit original sound) or PCM (If the soundbar does not support coding).
• 🔄 Management HDMI: Activate the Anynet option+ (HDMI-CEC) In Settings → General. → External devices to allow the TV remote to control soundbar volume.

⚠️ Note: On some Samsung models QLED 2020-2023 when connecting through HDMI ARC You may experience a delay in sound (lipsinc) when viewing content through embedded apps (e.g. Netflix or YouTube).Solution: In the TV sound settings, enable the option of lip/sound sync and manually select the delay.

If your soundbar Xiaomi Redmi TV Soundbar doesn't support it. HDMI ARC (For example, in early versions of firmware, update it through the Mi Home app or manually from the official Xiaomi website.

3. Wireless Bluetooth connection: simple but limited

If you don't want to mess with wires, Bluetooth is a convenient alternative, but keep in mind that it can cause delays in sound (especially in movies and games) and sound quality will be worse than in the video. HDMI Or optics. That's how you connect:

1. Turn on the soundbar and put it into pairing mode, holding the Bluetooth (or Source) button until the indicator blinks.
2. On Samsung TV, go to Settings → Sound. → Sound output → List of Bluetooth devices.
3. Choose Xiaomi Redmi TV Soundbar from the list of available devices.
4. Confirm pairing (a PIN- code may be required – usually 0000 or 1234).

After connecting, check:

• 🔊 Sound quality: There may be an option in the TV's Bluetooth settings Sound Quality - choose Best Quality (although this will increase latency).
• 🔋 Auto Connection: To enable the soundbar to connect automatically when turned on, activate the Auto Connection option in the Bluetooth menu.

The main disadvantage of Bluetooth is the latency of sound (lip-sync). TV This can be partially compensated:

1. Go to Settings. → Sound. → Expert settings → Synchronization of lips/sound.
2. Set the delay manually (start with the +100ms and adjust until the sound matches the video).

💡

If the sound is interrupted or there are interference, reduce the distance between the TV and the soundbar or remove sources of interference (Wi-Fi routers, microwaves).

Optical connection: reliable but without volume control

Toslink transmits digital audio without compression, which guarantees high quality, but makes it impossible to control the soundbar from the TV remote. TV supportive HDMI ARC Or you prefer a wired connection without delay.

Instructions for connection:

1. Connect the optical cable to the Optical Out port on your TV and Optical In on your soundbar.
2. Turn on both devices.
3. On the TV, go to Settings. → Sound. → Sound output and select Digital Audio Output (optical).
4. In the digital output format menu, install Bitstream (to transmit original sound) or PCM (If the soundbar does not support coding).

Pay attention to the following nuances:

• 🔌 Cable: Use high-quality optical cable with ferrite rings – this will reduce interference.
• 🔊 Sound formats: Optical output does not support DTS:X Dolby Atmos – the sound will be converted to Dolby Digital. PCM.
• 🔄 Control: The soundbar volume will have to be adjusted separately (from its remote or buttons on the body).

⚠️ Note: On some Samsung models (e.g. series) NU7100 or RU7100) The optical output is disabled by default. To activate it, go to Settings. → Sound. → Expert settings → Digital output and enable Optical Out option.

5. Connection through 3.5 mm AUX: universally, but with a loss of quality

If you're Samsung TV lacking HDMI ARC or optical output, remains analog connection through 3.5 mm AUX. This method is simple, but has significant disadvantages:

• 🔊 Sound quality: Analog signal is subject to interference and does not transmit multichannel sound.
• 🔌 Cable length: The longer the cable, the worse the quality (optimum - up to 1.5 meters).
• 🔋 Control: Volume is regulated only on soundbar.

How to connect:

1. Connect 3.5mm AUX on a TV (the connector is usually signed Audio Out or Headphone) with a port AUX IN soundbar.
2. Turn on both devices.
3. On the TV in the menu Settings → Sound. → Select Audio output (3.5 mm) or External speaker.

If the sound is too quiet or distorted:

• 🔊 Check the volume level on the TV – it should be at least 50%.
• 🔧 Try another cable (sometimes cheap cables give a background).
• 🔄 In the TV sound settings, turn off all effects (e.g, 3D Sound or Adaptive Sound, as they can degrade the signal.

6.Tune the sound on the Samsung TV after connecting

Even if the soundbar is successfully connected, the sound may not work properly due to the wrong settings on the TV.

Choice of sound source:

• Go to Settings → Sound → Sound output.
• Make sure the right source is selected (for example, HDMI ARC, Optical or Bluetooth).

Sound format:

• Settings menu → Sound. → Expert settings → Digital output format:
• For HDMI ARC or opticians select Bitstream (if the soundbar supports decoding).
• For Bluetooth or AUX set up PCM.

Sound effects:

• Turn off all post-processing audio (Adaptive Sound, Equalizer, 3D Audio), as they may conflict with soundbar settings.
• If the sound is too quiet, increase the external speaker amplification setting (if any).

Synchronization of sound and video:

• If the sound is behind or ahead of the video, go to Settings → Sound. → Synchronize your lips/sound and manually select the delay.

💡

After connecting the soundbar, always reset the TV’s sound settings to the factory ones – this will eliminate conflicts with previous audio devices.

7. Solving typical connection problems

Even with the right connection, there can be problems, and here are the most common ones and how to fix them:

Problem 1: No sound through HDMI ARC

• 🔌 Check that the cable is connected to the port with the inscription ARC.
• 🔄 Turn on Anynet.+ (HDMI-CEC) TV settings.
• 📺 Reboot the TV and soundbar (remove the plugs from the socket for 30 seconds).
• 🔧 Update the TV firmware and soundbar.

Problem 2: The sound is interrupted or distorted by Bluetooth

• 📱 Reduce the distance between devices (maximum 5-7 meters).
• 🔌 Disable other Bluetooth devices that may interfere.
• 🔄 Reconnect the soundbar (remove it from the list of devices and re-conjugate it).
• 🔊 In Bluetooth TV settings, select Stability Priority instead of Quality Priority.

Problem 3: Soundbar doesn't respond to the TV remote

• 🔄 Make sure it's on. HDMI-CEC (Anynet+ Samsung).
• 📺 Check if your soundbar model supports control HDMI-CEC (Instructions for Xiaomi Redmi TV Soundbar it should be indicated).
• 🔧 Reset the settings. HDMI-CEC on TV: Settings → General. → External devices → Anynet reset+.

Problem 4: The sound is there, but it is very quiet.

• 🔊 Check the volume level on the soundbar itself (buttons) +/– case).
• 📺 On the TV in the menu Settings → Increase the level of the external speaker (if any).
• 🔌 If you use AUX, Try another cable (possibly damaged).

8. FAQ: Answers to Frequent Questions