Modern wireless headphones have become an essential accessory for millions of smartphone users, providing freedom of movement and high-quality sound. Xiaomi Mi True Wireless Earbuds Basic 2 is deservedly popular due to the optimal ratio of price and functionality, but the initial setup sometimes causes difficulties for beginners.
The process of connecting a device to a mobile gadget is based on the standard Bluetooth protocol, but there are nuances that must be considered for successful synchronization the first time. In this guide, we will discuss in detail all the stages of connection, from extracting from the case to fine-tuning the sound parameters in the system.
Often, users are faced with a situation where the phone does not see the headphones or connects only one earbud, ignoring the second. Understanding the logic of the pairing mode will help avoid common errors and save time to troubleshoot in the future.
Preparation of headphones and phone for the first turn on
Before starting the pairing procedure, it is critical to make sure that both devices are ready to work and have sufficient battery power. Xiaomi Earbuds Basic 2 may not go into search mode if the energy level in the case or the headphones themselves is critically low, so it is recommended to put them on charge for at least 30-60 minutes.
You need to remove both earbuds from the charger at the same time, and it's the simultaneous removal that triggers the automatic switching on and making the headset visible to external devices, and if you only pull out one headphone, it may not activate Pairing mode correctly.
Navigating the menu may vary slightly depending on the version of the MIUI or Android operating system, but the general path remains standard for most devices.
💡
Make sure that the headphones do not have a protective insulation film on the charging contacts inside the case, otherwise they may not turn on after extraction.
Make sure that the distance between the phone and the headphones at the time of initial setup is less than one meter. Direct visibility of Bluetooth antennas provides the most stable signal for handshake-process.
Step-by-step instructions for pairing with Android and iOS
The algorithm for connecting to Android and iOS smartphones is almost identical, because it uses a universal data transfer standard. Once you remove the headphones from the case, the indicators on them should often flash white, indicating the transition to standby mode.
Take your smartphone and go to the settings menu, and you need to find the wireless partition and activate the Bluetooth module if it's turned off, and the system will automatically search for available devices within range.
☑️ Checking before connection
The list of devices found should include the name Xiaomi Earbuds Basic 2 or similar. Click on it to initiate the mating process. In some cases, the system may request confirmation of action or input. PIN-code that is usually the default of 0000.
Once successfully connected, the voice assistant can voice the status of "Connected", and the headphone indicators will change the pattern of blinking to a rarer one or completely go out by going into operation mode.
⚠️ Note: If two Xiaomi Earbuds Basic 2 names are displayed on the list of available devices, this means that the headphones are not synchronized with each other.
Configure access rights and additional functions in MIUI
Xiaomi smartphone owners can take advantage of the advanced customization options through the system menu or the Mi Wear app (formerly known as Mi Earbuds). To access the basic settings after connecting, just go to the Bluetooth menu, find the connected device and click on the gear icon or arrow next to it.
This gives you access to audio profile management, so you can turn on or off the media audio and audio call separately, and this is useful if you want to listen to music through your phone's speaker and talk through your headset, or vice versa.
Google Fast Pair or similar fast-connection services can automatically prompt you to open your headphone settings when you first detect it, which you should not refuse, as this allows you to immediately update the firmware of the device, if this is possible.
For deeper customization, including touch control settings and checking the charge level of each earphone separately, it is recommended to install a specialized application from the Google Play store or the App Store.
Problem Solving: The phone can't see headphones
The situation when the smartphone stubbornly ignores the presence of headphones in the air is quite common and usually associated with a software failure or residual data of previous connections.
Go to Bluetooth settings, search the Xiaomi Earbuds Basic 2 list (if there are any) and select the option “Forget the device” or “Unpair the pairing.” Then turn off Bluetooth on the phone, put the headphones in the case and close the lid.
The next step is to force the headphones to reset, and this Basic 2 model often requires removing them from the case and quickly pressing the touch areas of both headphones 5 times at the same time until the indicators flash red, which will return them to factory parameters.
| Symptoms. | Possible cause | Method of decision |
|---|---|---|
| Phone can't see headphones | The pairing mode is not activated | Put in the case, close, take both at the same time |
| Only one headphone is connected. | L/R synchronization is broken | Perform reset (5 taps) and reconnect |
| Intermittent sound | Interference or low charge | Charge devices, remove sources of interference |
| No sound in games. | High codec latency | Use aptX codecs or reduce network load |
After reset, repeat the search procedure from your phone. If the problem persists, try connecting the headphones to another device to rule out a malfunction of the Bluetooth module of the smartphone itself.
💡
Full reset of headphones (Hard Reset) solves 90% of problems with desynchronization of the left and right channel.
Managing multimedia and calls through the sensor
Once successfully connected, it is important to master the control system, which is implemented through the touchpads on the body of each headphone. By default, the command configuration may differ, but the basic feature set usually includes playback management and call response.
A single touch of the touch zone typically pauses the track or resumes playback. Double tap is often used to activate the voice assistant or switch the track, depending on the settings in the application. Triple tap is usually designed to call the last dialed number or activate the assistant.
To adjust the volume directly from the headphones (if this feature is supported by firmware), you can use a long press on the right or left earbud. However, in the base model Basic 2, loud control is most often carried out through the smartphone screen, and sensors are responsible only for tracks and calls.
⚠️ Attention: Sensors respond to light touch, no need to push hard. Excessive force can lead to accidental command operation or discomfort in the ear.
If you take off one headphone, the second one can automatically pause the music thanks to the wear sensor.
Features of working with two phones and reconnection
Xiaomi Mi True Wireless Earbuds Basic 2 supports Multipoint technology in limited form or does not support it at all depending on the firmware version, which means that it is impossible to connect to two audio sources simultaneously.
If you want to switch from your phone to your tablet or laptop, you don't have to pair it again every time, just turn off Bluetooth on the first device or select "Disable" in its settings, and the headphones will automatically start looking for the last known device.
To force a new gadget from the list of previously used, just turn on Bluetooth on the target device. Headphones, being outside the case, will initiate a connection with the last active device, if it is not available, they will go to standby.
The secret to a quick change of device
In some use cases, such as watching videos, minimal audio delay is important. Make sure that Bluetooth settings on Android have power saving features disabled for the communication module, if any are available in your firmware.