The situation where wireless headphones suddenly start to pronounce incomprehensible phrases in English or Chinese is familiar to many owners of Xiaomi equipment. This can be an annoying factor, especially if the device is in your pocket or bag and you do not plan to use it right now. Most often, such "talk" indicates that one of the system triggers: on, pairing, low charge or accidentally pressing the touch panel worked.
Understanding what your device is sounding is the first step to solving the problem: The voice assistant built into the firmware is designed to help the user navigate battery and connection statuses, but when it is triggered frequently, it becomes a source of noise. In this article, we will explain in detail why TWS-Xiaomi headphones emit sounds, how to translate them into Russian or completely disable voice notifications.
Don't panic if the device starts talking by itself. This is a regular feature of firmware, not a sign of a virus infection or a critical break in the speaker. However, you should not ignore persistent signals either, as they may indicate a need for maintenance or a change in the use case.
Why the headphones say phrases: the main reasons
The first thing to understand is that voice messages are part of system navigation, and the manufacturer has put a set of instructions into the firmware that duplicate or replace light indications, because compact cases often don't have room for bright lights. LED-When you hear the word "Power on," it means you're turning on the device successfully.
Phrases can be activated not only by direct interaction, but also by sensors, for example, if the earpiece fell out of the ear or was removed from the case, the proximity sensor or gyroscope can initiate a connection command, at which point you will hear "Connected" or "Pairing".
⚠️ Warning: If the headphones start to talk about low charge ("Battery low") immediately after full charge, this may indicate battery degradation or a malfunction of the power controller.
Often it comes from contact with water or sweat, moisture can close the touch pads, mimicking finger touches, the device responds to "virtual" commands and reports its condition, and it's worth checking if the buttons of the mechanical models have stuck because of dirt.
List of phrases and their meaning
English Interface Language: How to Transfer to Russian
Many users are faced with the fact that the headphones speak only English or Chinese, this is due to the region for which a specific batch of gadgets was released. Global versions (Global Version) usually have multilingual support, while Chinese versions (CN Version) can be limited to one language.
Changing the language often requires the official Mi Wear or Xiaomi Earbuds app. Once you connect the headset to your smartphone, you need to go to the device settings inside the app. If the language is supported by firmware, there will be a "Voice Prompt Language" or similar item.
In some cases, a full reset helps, and when paired again, the device can determine the language of the smartphone system and automatically switch to Russian, but this does not work for all models, especially the budget Redmi series.
If you can't change the language software, you can use third-party utilities, but this carries risks. Officially, Xiaomi does not provide tools for flashing regional versions of headphones to global ones without special cables and software. Therefore, most users have to put up with the English interface or memorize the main commands.
Instructions for complete reset (Hard Reset)
If the headphones are not right or are stuck in pairing mode, the solution is to perform Hard Reset, which clears the pairing memory and returns the settings to the factory settings, and it is important to do all the actions consistently so that the controller does not interfere with the algorithm.
First, place both earbuds in the charge case, make sure they fit tightly to the contacts and the indicators are on. Then find the function button on the case case case case (usually hidden or located on the end). In models without a button, the reset is made through the touch zones.
☑️ Reset algorithm TWS Xiaomi
When reset through touch panels, the algorithm may differ: You usually need to remove the headphones, touch both panels simultaneously and hold for about 5-10 seconds until the characteristic sound or turn off. After that, the procedure is repeated, holding the touch for longer (up to 20-30 seconds) until the indicators light up in orange.
⚠️ Note: During the reset process, do not open the case cover and do not remove the headphones, otherwise the procedure will be interrupted and the device may remain in a state of error.
Setup via Mi Wear and Xiaomi Earbuds app
For deep tuning and voice control, it is highly recommended to use specialized software. Mi Wear (formerly Xiaomi Wear) is universal for most audio devices in the ecosystem, which allows not only to track charge, but also to reassign the actions of touch zones.
In the settings menu, you can often find the option to turn off voice notifications. The path can look like Settings → Voice prompts → Off. If this option is not available, you can change the actions to double or triple touch to minimize accidental activations.
The firmware update often fixes bugs associated with false microphone or sensors, and the update process requires a stable Internet connection and a case charge of at least 50%.
💡
If the application does not see the headphones, try in the Bluetooth settings of the smartphone to click "Forget the device", and then start the search in the application again.
Sensor problems and false positives
One of the common reasons headphones start talking without the user being seen is because of the sensor, which responds to the touch of clothing, hair, or raindrops, and in active noise reduction (ANC) models, the sensors can respond to changes in pressure in the ear.
To reduce false positives, you can try changing the earbuds to fit more tightly, which will improve insulation and stability of the landing, and you should also wipe the inside of the earbud with an alcohol napkin, removing fat and sweat that can conduct current.
Some models have a "children's mode" or loss protection mode that activates the audible signals when you move away from the phone. Check the settings of the "Hearphone Search" feature in the app, perhaps it is set too aggressively.
Comparison of models: who speaks more often?
Different Xiaomi lineups use different chipsets and firmware versions, which affects the frequency and type of voice messages. Below is a table comparing the behavior of popular models.
| Model | Language default | Language change | Type of notification |
|---|---|---|---|
| Redmi Buds 3 Pro | English/Chinese | Through the app | Voice + Melodies |
| Mi True Wireless 2 | English | No (depending on version) | Just a voice. |
| Xiaomi Buds 4 | Multilingual | Automatically. | Voice + Sounds |
| Redmi Buds 4 Lite | English | No. | Just a voice. |
As you can see from the table, more expensive models are more likely to have flexible settings and sound duplicates of voice commands. Budget series rely solely on a voice synthesizer, which can sound monotonous.
💡
The newer the model and higher its class, the more opportunities for customizing the voice interface and disabling unnecessary sounds.
What to do if nothing helps
In rare cases, voice failures are a sign of hardware failure. If resetting, flashing and replacing the pairing device did not solve the problem, it may be damaged plume speaker or speaker. In such cases, "talk" earphone starts because of electrical tips.
It's also worth checking if the device is in conflict with other gadgets within Bluetooth range. Powerful radiation sources can cause interference that the microcontroller treats as commands. Try using the headphones elsewhere.
If the warranty period has not expired, the best solution is to contact an authorized service center. Self-opening of the case almost always leads to the loss of warranty, as the seals are leaky and intact.