Today, users are actively switching to wireless solutions, and TWS-The Chinese giant's headset has become a hit with affordability and quality, and many owners have difficulty getting to know each other for the first time, not understanding how to pair or activate the microphone noise cancellation properly. In this article, we will discuss in detail all aspects of using the gadget so that you can enjoy music without technical hitches.
The initial setup may seem confusing due to the lack of physical buttons on the body of the ears themselves and the specific logic of the indicators. Xiaomi AirDots (also known as Redmi Buds or Mi True Wireless Earbuds Basic) require a special approach to synchronizing left and right channels before connecting to a smartphone.
It's important to understand that the stability of the connection depends on the battery power and the absence of interference in the range of Bluetooth. To work smoothly both headphones in stereo mode, you first need to connect them to each other, and then look for the device in the phone. Ignoring this rule leads to the fact that the phone sees only one channel, and the second remains inactive. Let's look at the process of preparing the gadget for the first launch.
First Enabling and Activating the Device
After unpacking the box, the user finds a compact case and two small modules inserted into the charging sockets. First of all, make sure that the protective films are removed from the contact areas on the headphones themselves, otherwise they will not be able to charge from the dock. Insert the modules into the case before the magnets click and make sure that the charging indicators are on fire, which indicates that there is power in the battery.
To activate the pairing mode, you need to remove both devices from the case simultaneously, at which point they must automatically turn on, as signaled by a flashing blue-white indicator, if you use them for the first time, they will automatically go into pairing mode, but sometimes manual activation through the touch zones is required.
⚠️ Warning: If the lights don't light up after being removed, it's possible that the device is completely discharged. 15-20 minutes, connecting the case to the power network via a micro-USB cable.
The key at this point is to wait for one of the indicators to stop blinking fast and start burning or blinking slowly, which means that the left and right channels are successfully connected, and then you can switch to Bluetooth settings on your mobile gadget. Don't try to connect them to your phone until they're in sync with each other.
☑️ Primary launch
The process of pairing with a smartphone
When devices are in standby mode, you need to open Bluetooth settings on your phone or tablet. The list of available devices should appear as Redmi AirDots or Mi True Wireless EBs Basic. Click on the name to initiate a connection. In some cases, the system may request confirmation of an access code that is usually 0000, but most often happens automatically.
If the smartphone found only one headphone and the other one was silent, then the synchronization between the ears did not go well, in this situation, you need to remove the device from the list of stored Bluetooth, put both modules back in the case, close the lid and repeat the extraction procedure again, sometimes you need to reset the settings to the factory, which we will talk about in the next sections.
A feature of the iOS operating system is the lack of display of the charge level of each headphone in the standard widget, unlike the original AirPods. However, in the Android system, when connecting, the system window often pops up with animation and the percentage of charge of the case and each module separately, which is much more convenient for controlling autonomy.
Touch panel management
The most important part of the operation is knowing the touch commands, because there are no physical buttons on the body, and all control is done by pressing the outside of the earphone. The logic of the work may vary slightly depending on the firmware version, but the basic set of commands remains standard for the entire lineup. TWS-device manufacturer.
Single tap is usually responsible for playing or pausing a track, as well as responding to an incoming call. Double tap is most often designed to activate a voice assistant (Siri or Google Assistant) or switch the track forward, depending on the left or right channel configuration.
- 🎵 One touch: Start/Pause music or Answer the call.
- 📞 Two touches: Voice assistant or Next track (depending on the side).
- ⏮️ Three touches: Previous track.
- 📵 Retention 1.5 seconds: Deflection of incoming call or shutdown of device.
It is worth noting that holding the touch zone for 1-2 seconds when the phone is turned off leads to the turn off of the earphone itself, as reported by the voice prompt "Power off". This is useful if you want to save charge using only one module for mono mode.
💡
To avoid accidental taps during sports, try to touch the sensor with your finger pad clearly and quickly, without pressing the earpiece deeper into your ear at command time.
Indication and charging of the device
Understanding color is critical to diagnosing the condition of a gadget. Indicators on Xiaomi AirDots can burn red, white or blue, and flash at different frequency. Red light signals the charging process, and its absence when connected to the network indicates a complete charge or malfunction of the contacts.
When extracted from a case, a quick (blinking) white and blue means search mode. If the indicator flashes slowly blue, then the device is connected to the phone and ready to go. The red indicator, which lights up periodically while listening to music, warns of a critically low battery charge level that requires immediate installation in the case.
| Status of the indicator | Meaning | User action |
|---|---|---|
| Burning red (in case) | Charging's coming. | Expect full charge |
| Not burning (in case) | Charged or no contact | Check the landing density |
| Blinking white and blue | Interconnection mode | Search the Bluetooth menu |
| Slowly flashing blue | Connected to the device | We can use it. |
The case itself is charged via the Micro-USB port located on the end or bottom, depending on the revision. It is recommended to use charging currents no higher than 1 Ampere to avoid damaging the power controller, although modern protection schemes usually cope with more powerful adapters.
Mono mode and work with one headphone
The unique feature of the model is that it can only use one module, which turns the stereo headset into a mono headset, which is convenient for drivers or in situations where you need to hear the environment, and to activate this mode, you just need to take out one earphone from the case, leaving the second inside.
If you used both headphones and then put one in the case, the second should automatically switch to call or music standby mode, retaining the connection to the phone.However, if communication is lost, you may need to manually reconnect to the Bluetooth menu by selecting the active channel.
⚠️ Attention: With a single earphone, the volume may be lower than in a pair. This is normal, as some models balance the sound differently in mono mode.
To get the stereo back, just remove the second headphone from the case, they have to automatically find each other and restore the stereo pair within seconds, and if that doesn't happen, put both in the case, close the lid, and open again to restart.
Why isn't the second headphone connected?
Resetting settings and troubleshooting
In the case of channel desynchronization, where the sound is only on the left or right, or the phone sees the device but does not connect, a full reset is required, which returns factory settings and clears the memory inside the modules themselves.
To do the reset, you need to place both headphones in the charging case. Without removing them, press and hold the touchpads on both modules simultaneously for 5-10 seconds. The indicators should light up red, which will signal the beginning of the memory cleanup process. Once they light up red, release the sensors.
After a successful reset, the indicators can blink briefly, and then the device goes to standby mode, now you need to remove the old device from the Bluetooth list on the phone ("Forget the device") and perform pairing again, as when you first turned on, this solves 90% of the connection problems.
- 🔄 Put both modules in the case.
- 👆 Press and hold the sensors on both headphones. 5-10 seconds.
- 🔴 Wait for the red glow of the indicators.
- 📱 Remove the device from your Bluetooth phone and connect again.
If the problem persists, check the charging contacts in the case. Oxidation or dust may prevent proper initialization when extracted. Wipe the contacts with a dry soft cloth or cotton swab dipped in alcohol.
💡
Complete resetting of settings through the retention of sensors in the case is the main solution to problems with desynchronization of the left and right channels.