How to make a rising call on Xiaomi: turn-based alarm clock setting with a smooth increase in volume

The surge (or smoothly increase the volume of the alarm) feature on Xiaomi smartphones is one of the most popular, but not all users know how to activate it correctly. Unlike the standard sharp signal, this mode allows you to wake up gradually, without stress to the nervous system, especially for those who sleep sensitively or use the phone as the main alarm clock.

In this article, we will discuss all ways to configure a rising call on Xiaomi, Redmi and Poco devices running MIUI 12-15, including hidden chips and workarounds for older models, you'll learn how to set not only the standard alarm clock, but also smooth volume increase for incoming calls, notifications, and even timers, and why sometimes the feature doesn't work and how to fix it.

Attention! Some Xiaomi firmware (especially custom or global versions for Europe) may have hidden the scaling option, requiring workarounds, which we will discuss in the last section.

Before you start setting up, make sure that your device has the current version installed. MIUI. You can check this in the settings. → The phone. → Version. MIUI. If the version is older MIUI 12, some functions may be missing or not working properly.

1. setting the increasing alarm clock in the standard app "Clock"

The easiest way to activate smooth volume increases is through the built-in Watch app (an icon with a dial).This method works on most Xiaomi, Redmi and Poco models with a high-speed, high-speed, low-volume, low-volume phone. MIUI 12-15, but may not be available on lightweight firmware devices (e.g., Redmi Go or Poco C-series).

Step instructions:

1. Open the Watch app (if it is not on the home screen, search through the system search).
2. Go to the Alarm tab (bell icon at the bottom of the screen).
3. Press on. + (plus) or select an existing alarm clock to edit.
4. Scroll down to the Sound and Vibration block and tap it.
5. Activate the Up Call switch (or Smooth Volume Up – the name may vary).
6. Set the build-up time (the options are usually 10, 20 or 30 seconds).

Important: If you don't have a Crowding option, check if it's hidden in the additional settings. Sometimes you need to select the alarm melody (anything other than the standard alarms) to appear. MIUI).

Also, pay attention to the vibration settings, which can conflict with a smooth increase in volume. If the vibration is on, try turning it off or setting a minimum intensity.

Selected non-standard melody (not system)

Vibration is turned off or set to a minimum level

The device is not in "Do Not Disturb" mode.

Version. MIUI less than 12-->

2. Alternative method: use of the Google Watch app

If Xiaomi’s standard Watch app doesn’t have a surge call feature, you can use the alternative, Google Watch, which is available for download on Google Play and supports smooth volume increase on all Android 8.0 and higher devices.

How to set up:

1. Install Google Watch from the Play Market.
2. Open it and go to the Alarm tab.
3. Create a new alarm clock or edit an existing one.
4. Slap the gear icon (⚙️) near-time.
5. Select the Update signal and set the duration (up to 60 seconds).

Advantages of this method:

• 🎵 More variations of tunes (including nature sounds and music from YouTube Music).
• 🔄 The ability to sync alarm clocks with other devices on Android.
• 🛠️ It works even on older Xiaomi models (e.g. Redmi). 4X or Mi A1).

A critical nuance: on some Xiaomi firmware, the Google Watch app can automatically close in the background. To avoid this, add it to the list of Protected apps in the battery settings.

Standard Watches from Xiaomi

Google Watch

Sleep as Android

Other appendix

I don't use an alarm clock on my phone.-->

3. Set up a scaling call for incoming calls

In addition to the alarm clock, Xiaomi smartphones can set up a smooth volume increase for incoming calls, a feature that is useful if you often miss calls due to a quiet signal or are in a noisy place.

How to turn on:

1. Go to Settings → Sound and vibration → Call.
2. Then, turn the bell (or the bell) to the top.
3. Choose the duration of the build-up (usually 5 to 30 seconds).
4. Activate Vibration when increasing if you want to combine sound with tactile return.

Limitations:

• ❌ Does not work for VoIP calls (e.g. WhatsApp, Telegram, Skype).
• ❌ Can conflict with Do Not Disturb (check exceptions in settings).
• ❌ On some models (e.g. Poco) X3 Pro: the function is available only for SIM-card.

If you don’t have the option, try updating your firmware or using third-party apps like True Phone or ExDialer that support a scaling call for calls.

4. Hidden settings MIUI: How to turn on a mounting call through the engineering menu

If you're in your version MIUI There is no surge call option in standard settings, it can be activated via the engineering menu (hidden mode for testing), which is suitable for experienced users and requires caution - incorrect changes can lead to malfunctions in the phone.

Instructions:

1. Open the Phone app and enter the combination: ##36446337###
2. You will be taken to Engineer Mode. Go to Hardware Testing → Audio.
3. Find the Ringing Volume Ramp Up option and set the Enabled value.
4. In the Ramp Up Duration field, specify the build-up duration in milliseconds (e.g., 20,000 for 20 seconds).
5. Save the settings and restart the device.

⚠️ Warning: Changes to the engineering menu can lead to unstable sound performance. If after setting up there is interference or the call is completely gone, reset the sound settings to the factory in Settings → System system → Resetting settings → Resetting the sound settings.

This method works on most Xiaomi devices with Qualcomm processors (e.g. Redmi Note 10 Pro, Poco, and other devices). F3). On devices with Mediatek chips (for example, Redmi). 9A) The path in the engineering menu may be different.

5. Third-party applications for increasing call: TOP-3 decision

If none of these methods worked, we've got third-party apps, and we've tested dozens of programs and selected the three most reliable ones.

1. Alarmy (Sleep If U Can)

• 🔔 Supports a growing call with custom tunes.
• 🎚️ Adjustment of the duration of the increase (from 5 to 120 seconds).
• 🔄 It works even when the internet is off.
• ⚠️ Disadvantage: Free version shows ads.

2. Sleep as Android

• 🌙 Integration with sleep trackers (e.g. Mi Band).
• 📊 Sleep analytics and a smart alarm clock in the phase of light sleep.
• 🔊 A growing call with support for Spotify playlists.
• ⚠️ Disadvantage: Part of the functions paid.

3. MacroDroid

• 🤖 Creating automatic rules for increasing calls.
• 🔧 It works with all sounds and notifications.
• 📱 Supports Xiaomi with custom firmware.
• ⚠️ Cons: a complex interface for beginners.

💡

If you use Alarmy or Sleep as Android, add them to the AutoRun list and Without Restrictions in Battery Settings (Settings) → Annexes → Permits → This will prevent the alarm clock from automatically closing with the background optimizer. MIUI.

Frequent problems and their solutions

Even after setting it up properly, the mounting call may not work properly, and we'll look at some of the most common problems and ways to fix them:

Problem 1: The call is growing too fast or slow

• 🔧 Solution: In the standard Watch app, check the build-up time. If you don't have an option, use Google Watch or Alarmy where you can customize your timing more accurately.

Problem 2: A mounting call only works once, then becomes normal.

• 🔧 Solution: It's a bug MIUI, Add the Watch app to the Secure Applications (Settings) → Battery → Secure applications).

Problem 3: The function is not in the settings

• 🔧 Solution 1: Update your firmware to the latest version MIUI.
• 🔧 Solution 2: Install custom firmware (e.g. xiaomi.eu) where the function is unlocked.
• 🔧 Solution 3: Use the engineering menu (Section 4) or third-party apps (Section 5).

Problem 4: The mounting ring only works for alarm clocks, not for calls

• 🔧 Solution: Check if the function is disabled in the settings SIM-Go to the settings. → SIM-maps and mobile networks → Settings SIM-map → Call and activate the mounting call.

💡

If after all the manipulations, the increasing call did not work, try resetting the sound settings to the factory. → System system → Resetting settings → Resetting the audio settings. It won't delete your data, but it will return all audio settings to the default state".

7.The growing call on Xiaomi smartwatches and fitness bracelets

If you use the Mi Band, Xiaomi Watch or Redmi Watch, you know that the default alarm clock on them sounds sharp and loud. Unfortunately, the standard Mi Fitness or Zepp app doesn't have a surge call feature.

Method 1: Using a Smartphone as an Intermediary

• Set an alarm clock on your phone (Section 1 or 2).
• In the Mi Fitness app, turn off the alarm on the bracelet, but leave notifications about calls.
• The phone will smoothly increase the volume, and the bracelet will vibrate in time.

Method 2: Third-party applications for Wear OS

• If your watch is working on Wear OS (For example, Xiaomi Watch S1), Install Sleep as Android and sync it with your watch.
• In the alarm settings, select the Climbing Signal and activate the Vibration option on the clock.

Method 3: Firmware custom software (for advanced)

• On some Mi Band models (for example, Mi Band 6) you can flash an alternative firmware like AmazMod, which has advanced alarm settings.
• ⚠️ Risk: Unofficial firmware can lead to loss of warranty or unstable operation of the device.

FAQ: Answers to Frequent Questions