Xiaomi’s modern wireless headsets have proven to be an affordable and high-quality solution for everyday use. However, the initial setup process sometimes causes difficulties for users who are first exposed to Bluetooth Low Energy technology. Proper pairing is the key to stable sound and proper touch control. In this article, we will examine all the nuances of how to finish Xiaomi Mi True headphones with various devices.
Start by checking the battery charge in the case and the headphones themselves. If the indicators do not light up when extracted from the case, you need to put the device on charge for at least 30 minutes. Often, visibility problems in the list of available devices arise precisely from deep discharge, when the communication module simply does not activate.
The synchronization process does not require the presence of specialized software on the smartphone, although the proprietary application Xiaomi Earbuds or Mi Wear significantly expands the functionality. Basic connection is carried out by standard means of the Android or iOS operating system.
Primary activation and entry into the pairing mode
The first step is to remove the headphones from the charging case. Unlike some other models, the Mi True often automatically switches to device search mode immediately after opening the lid, unless they have previously been associated with the phone.
If you don't start automatically, you'll need to activate the touch area on both headphones at the same time and hold your finger for 5 seconds. Some versions use a physical button on the back of the charger case to enter Pairing Mode, which you hold until the indicator flashes quickly.
⚠️ Warning: Make sure the headphones are close together during this procedure. if they are not synchronized with each other (mode) TWS), The phone will see them as two separate devices or will not see them at all.
It's important to understand the difference between the off state and the standby mode. When the headset is in a case with the lid closed, it's turned off. When it's removed, it turns on, but may not go into detection mode if it was previously associated with another gadget, which requires manual resetting or disabling Bluetooth on the old device.
💡
If the lights flash slowly, the headphones are just on, but not looking for the device. Fast blinking (search mode) often requires holding the sensor or case button.
Interfacing with Android-based devices
Android provides a wide range of peripheral management options. To start the process, open your smartphone's standard settings and go to Bluetooth. Make sure the activation slider is moved to the "On" position and the smartphone has started scanning the surrounding space.
The list of available devices should show the name of your model, for example, Mi True Wireless Earbuds Basic or Mi True Wireless Earphones 2. Click on the name to start pairing. The system can request a code confirmation or simply notify you of the successful connection of the A2DP profile (sound transfer) and HFP (headset).
☑️ Checklist of Android connection
After successfully installing the connection, the sound may not switch to the headset by default, in which case open the control panel (curtain) or audio settings and choose the Xiaomi Mi True as the output device. This is especially true for smartphones with a MIUI shell, where the priority of sound sometimes remains on the speaker of the phone.
Xiaomi and Redmi smartphone users can use a quick pairing feature via a pop-up window. If the smartphone has the current version of MIUI installed, when you open a case next to the phone, an animation with a suggestion to connect can appear on the screen, similar to Google's Fast Pair protocol.
Connection settings for iOS (iPhone and iPad)
Apple owners need to consider the peculiarities of the iOS operating system. The process begins similarly: the headphones are transferred to pairing mode, after which a new device appears in the Settings → Bluetooth menu on the iPhone.
When you first connect, the system may request permission to access your contacts or voice assistant Siri. It is recommended to agree to be able to answer calls and control music by voice. Without this, the functionality of the headset will be limited to audio playback only.
| Function | Android | iOS (iPhone) |
|---|---|---|
| Codec of sound | SBC, AAC, aptX (depending on model) | AAC (priority) |
| Voice assistant | Google Assistant | Siri |
| Annex | Mi Wear / Xiaomi Earbuds | |
| Autopause. | Through sensors in the app | Through sensors in the app |
It’s worth noting that some advanced settings, such as equalizer or firmware update, on iPhones may not be available without installing specialized apps from the App Store, as Xiaomi’s native iOS app has limited functionality compared to the Android version.
Using the Mi Wear app for advanced management
To achieve full potential TWS-The headset is highly recommended to install the official Mi Wear app (formerly known as Xiaomi Earbuds) available on Google Play and allows you to customize the behavior of the headphones in detail. After installing the application, you need to add the device through the Add Device menu inside the program, rather than through standard Bluetooth settings.
You can have touch settings in the app, you can reassign the actions to double or triple touch, for example, set up track switching, activate noise reduction, or call a voice assistant, without this application, these settings often work in factory mode, which may not be convenient.
⚠️ Attention: Updating the firmware headphones is possible only through the application Mi Wear. interruption of the update process can lead to incorrect operation of the device, so make sure that the case charge was above 50%.
It also shows the exact charge level of each headphone and the case as a whole, which helps you monitor battery health more accurately than a standard Android widget, and you can find headphones on the map if they were lost within the range of Bluetooth.
Problem Solving: Headphones are not connected or only one is visible
One of the most common problems is when the smartphone sees only one headphone or they do not connect, which means that the synchronization of the left and right channel is broken, you need to perform a full reset to fix.
The reset procedure usually looks like this: place both headphones in the case, close the lid, then open it and press the pairing button (or hold the sensors) for 10-15 seconds until the indicators flash red several times. After that, remove the device from the Bluetooth list on the phone ("Forget the device") and try to connect again.
Why does the reset help?
Another cause of problems could be interference on the air. If you're near a powerful Wi-Fi signal source or microwave oven, try to move to another room. Bluetooth protocol operates at 2.4 GHz, which is often congested in apartment buildings.
Subtleties of working with codecs and sound quality
The quality of music playback depends on the codec used. The base models of Xiaomi Mi True support the SBC codec, which provides standard quality. More advanced versions, such as Mi True Wireless Earphones 2 Pro, support the AAC codec and even aptX for high-resolution audio.
To activate a high-quality codec, it is necessary that it is supported not only by the sound source (smartphone), but also by the headset itself. In the developer settings on Android (System → About Phone → 7 times click on the build number → For developers), you can forcibly choose the codec, but only experienced users should do this.
An incorrectly selected codec can cause sound and video to become out of sync. If you notice a lag in audio when watching YouTube or TikTok, try turning off the "Absolute Volume Level" option in Bluetooth settings or changing the codec to a lighter one, such as SBC.
💡
Connection stability is more important than the theoretical quality of the codec. If the signal is unstable, it is better to use a basic SBC than to tolerate breaks on aptX.